Civil Works For Renovation Of Existing Ladies Washrooms At First Floor Of Fag Division Ecil Hyderabad.S No Item Description Item Long Description Quantity Unit Group No. 1 1.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 61.000 Sq.Metr NA 2 2.1 Dismantling G.I. pipes (external /internal work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 17.000 Metre NA 3 3.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter 5.000 Metre NA 4 4.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe 6.000 Metre NA 5 4.2 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe 9.000 Metre NA 6 5.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. : Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 0.500 Cu. Metr NA 7 6.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 3.000 Cu. Metr NA 8 7.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 3.000 Each NA 9 7.2 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres 7.000 Each NA 10 8.1 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats 21.000 K.G.s NA 11 9.1 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness up to 40 mm 3.000 Sq.Metr NA 12 10 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 2.000 Each NA 13 11 Removal of EWC, IWC, wash basin etc., with fittings etc., complete and as per the direction of Engineer-in-charge. 6.000 Each NA 14 12 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 0.050 Cu. Metr NA 15 13 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 37.000 Sq.Metr NA 16 14 Demolishing of weldmesh partitions including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead etc., complete and as directed by Engineer-in-charge. 27.000 Sq.Metr NA 17 15.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) 4.000 Cu. Metr NA 18 16.1 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 0.270 Cu. Metr NA 19 17.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 25.000 K.G.s NA 20 18.1 Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers 3.000 Sq.Metr NA 21 19.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 53.000 Sq.Metr NA 22 20 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 53.000 Sq.Metr NA 23 21.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 5.300 Cu. Metr NA 24 22.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 105.000 Sq.Metr NA 25 23 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 48.000 Sq.Metr NA 26 24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: JK Putty/Birla Putty 130.000 Sq.Metr NA 27 25.1 Distempering with 1st quality acrylic distemper (ready made) VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer s specification. Make: Asian/Berger/Nerolac/Indigo One or more coats on old work 52.000 Sq.Metr NA 28 26.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Make: Asian/Berger/Nerolac. Two or more coats on new work 25.000 Sq.Metr NA 29 27.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Make: Asian/Berger/Nerolac/Indigo One or more coats on old work 9.000 Sq.Metr NA 30 28.1 Wall painting with premium acrylic emulsion paint of interior grade, VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats 130.000 Sq.Metr NA 31 29.1 Finishing walls with Acrylic Smooth exterior paint of required shade. Make: Asian/Berger/Nerolac/Indigo New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 60.000 Sq.Metr NA 32 30.1 Finishing walls with Acrylic Smooth exterior paint of required shade. Old work (One or more coat applied @ 0.90 ltr/10 sqm). 36.000 Sq.Metr NA 33 31.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 54.000 Sq.Metr NA 34 32 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 88.000 Sq.Metr NA 35 33 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make: Nitco/Kajaria/Somany 65.000 Sq.Metr NA 36 34 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 17.000 Sq.Metr NA 37 35.1 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 38.000 Sq.Metr NA 38 36 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. 34.000 Sq.Metr NA 39 37 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 34.000 Sq.Metr NA 40 38 Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. Make: Orient / Equivalent (with prior approval of Engineer-in-charge) 13.000 Sq.Metr NA 41 39 Providing and fixing windows made with UPVC (Unplasticised polyvinyl chloride) including door/window suitable sections with necessary fixtures, fastners and panel filling with 5mm thick float for windows and 12mm thick WPC (wood plastic composite) white panel etc., complete and as directed by Engineer-in-charge.Make: Finesta/Orient / Equivalent (with prior approval of Engineer-in-charge) 1.700 Sq.Metr NA 42 40 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer ( brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 2.000 Each NA 43 41.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 7.000 Each NA 44 42.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 9.000 Each NA 45 43.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 7.000 Each NA 46 44.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 11.000 K.G.s NA 47 44.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 11.000 K.G.s NA 48 45.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 5.000 Sq.Metr NA 49 46 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment). 9.000 K.G.s NA 50 47 Providing etching for float glass panes in aluminium work etc., complete and as directed by Engineer-in-charge. 5.000 Sq.Metr NA 51 48.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 15.000 Metre NA 52 48.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter 15.000 Metre NA 53 49.1.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/Ashirvaad/Astral Single tee with door 110x110x110 mm 5.000 Each NA 54 49.2.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/Ashirvaad/Astral Bend 87.5 degree 75 mm bend 5.000 Each NA 55 49.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/Ashirvaad/Astral Bend 87.5 degree 110 mm bend 5.000 Each NA 56 49.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/Ashirvaad/Astral Shoe (Plain) 110 mm Shoe 2.000 Each NA 57 50.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 40mm dia 2.000 Metre NA 58 51 Supplying and fixing 100mm PVC nahani trap with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 6.000 Each NA 59 52.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Make: Sudhakar/Ashirvaad/Astral 25 mm nominal outer dia Pipes 22.000 Metre NA 60 52.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Make: Sudhakar/Ashirvaad/Astral 20 mm nominal outer dia Pipes 8.000 Metre NA 61 53.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 3.000 Each NA 62 54.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Make: Hindware/Parryware/Cera. W.C. pan with ISI marked white solid plastic seat and lid 3.000 Each NA 63 55.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Make: Hindware/Parryware/Cera. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1.000 Each NA 64 56.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Make: Hindware/Parryware/Cera. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 4.000 Each NA 65 57 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.Make: Hindware/Parryware/Cera 4.000 Each NA 66 58 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 4.000 Each NA 67 59.1 Providing and fixing brass bib cock of approved quality. Make: Cera/Seico 15mm nominal bar 9.000 Each NA 68 60.1.1 Providing and fixing unlasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 8.000 Each NA 69 61.1 Providing and fixing CP Health faucets of approved quality and make with all fittings etc., complete and as directed by Engineer-in-charge. Make: Cera/Parryware/Hindware. 15mm nominal bore 3.000 Each NA 70 62.1 Providing and fixing CP Brass two in one tap of approved quality etc., complete and as directed by Engineer-in-charge. Make: Hindware/Parryware. 15mm nominal bore 3.000 Each NA 71 63.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 4.000 Each NA 72 64 Providing and fixing 15mm diameter CP brass angle cock of quality & make as approved by Engineer-in-charge. Make: Cera/Seico 8.000 Each NA 73 65 Providing and fixing SS towel ring round shape 200 mm dia flange with minimum distances of wall face with concealed fittings arrangement of approved quality and colour etc., and as directed by Engineer-in-charge. Make: Hindware / Cera 2.000 Each NA 74 66.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.000 Each NA 75 67 Providing and fixing soap dispenser or Hand was dispenser of approved quality as per the directions of Engineer-in-charge. Standard make with prior approval of Engineer-in-charge.) 4.000 Each NA 76 68 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 5.000 Cu. Metr NA 77 69 Providing and fixing ball valve (CPVC) of approved quality, high or low pressure etc., complete and as directed by Engineer-in-charge. 3.000 Each NA 78 70 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. With average thickness of 120 mm and minimum thickness at khurra as 65 mm. The detailed scope of work is attached as document. You are requested to quote as per the detailed scope of work 51.000 Sq.Metr NA 79 71 Supply and fixing of vertical venetian blinds of 4 width as per user s requirement with necessary accessories and approved colour etc., complete and as directions of Engineer-in-charge. 5.430 Sq.Metr NA 80 72 Providing and fixing toilet paper holder of CAT no.F890003 etc., complete and as directed by Engineer-in-charge. Make: Hindware. 4.000 Each NA 81 73 Supply and fixing of hydraulic horizontal door closers of Godrej make including necessary screws and labour for fixing etc., complete and as directed by Engineer-in-charge. 1.000 Each NA
