|
| 1 | AGE B/R SCHEDULE PART - IDismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and as directed. |
| 2 | Dismantlingboarding any description fixed in any position with nails complete all as specified and directed. |
| 3 | Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or ins complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed. |
| 5 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof coveringof tensile strength 550 mpa including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 6 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof coveringof tensile strength 550 mpa including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed |
| 7 | M&L plain fillets square rectangular or triangular in section bullnosed,splayed,chamfered or rounded on one edge or face secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm complete all as specified and directed. |
| 8 | S&F20mm thick 2nd class hard wood boarding in eaves board/fascia plained both sides with butt joints fixed with nailscomplete all as specified. |
| 9 | M&L non asbestos fibre cement building boards of 4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and as specified. |
| 10 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts etccomplete all as specified and directed. |
| 11 | M&L for preparation of new or previously untreated surface ofsteel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 12 | M&L for applying three coats of white was complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level)complete all as specified and directed. |
| 15 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 16 | Demolition of Brickwork or stone/boulder masonry or precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework built in cement mortar complete all as specified. |
| 17 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. |
| 18 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sq. m eachall as specified. |
| 19 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m eachall as specified. |
| 20 | Demolition and breaking up drain pipes 100 mmdia (salt glaged ware AC or reinforced concrete) set in cement mortar. |
| 21 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 22 | M&L for Non skid, coloured, joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colourover 15mm thick screed bed in CM 1:4 complete all as specified and directed |
| 23 | M&L for Glazed ceramic coloured tiles in vertical surface of size 300X 450X 7mm/300X 600X 7mm/350x 250x 7mm/ 450X 350X 7mm thick setand jointed in neat cement slurry and pointed in white or colour cement to match with thetile colour over 10mm thick backing coatin CM 1:3 complete all as specified and as directed. |
| 24 | M & L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as spefied. |
| 25 | M&L 100mmthick cement concreteusing (40mm graded aggregate) type D-2 (1:4:8)complete all as specified and as directed. |
| 26 | M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m and joints filled with bitumen sand mastic with ratio (1:3 ) complete all as specified and as directed. |
| 27 | M&L for 25 mm thick cement concrete 1:2:4, Type B-0 (12.5mm graded aggregate) as in floor for tiles and pcc padding complete all as specified and as directed. |
| 28 | M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed. |
| 29 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends complete all as specified and directed. |
| 30 | M&L for Use and waste of Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter , complete all as specified and as directed. |
| 31 | M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking jointsand setting in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 33 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat complete all as specified. |
| 34 | M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips complete all as specified and as directed. |
| 35 | M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4)finished even and smooth without using extra cement all as specified and directed |
| 36 | M&L for Complete removal of existing treatment, preparing surfaces plastered or unplastered, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified and directed. |
| 37 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 38 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed. |
| 39 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm all as specified and as directed. |
| 40 | S&F Extruded Aluminium, anodised, bow handles of size 150mm all as specified and as directed. |
| 41 | S&F aluminium anodised barrel bolts and fixed of 200 mm length all as specified and as directed. |
| 42 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed. |
| 43 | M&L Aluminium anodized frame Powder Coated (minimum thickness of powder coating 50 micron) for doors , windows , ventilators with one or more rebates incl joing cleat for fixing etc complete all as specified |
| 44 | S&F Anodised aluminium window and ventilator shutters, Powder Coated (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 45 | S&F anodised door shutters , Powder Coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified |
| 46 | S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed |
| 47 | S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified (ISI Marked) complete all as specified and directed. |
| 48 | S&F in repairs brass mortice lock, vertical type size 100mm 2 levers all as specified and as directed. |
| 49 | Taking up or down steel tubing and connections for 15 mm bore of pipes all as specified and as directed. |
| 50 | Taking up or down steel tubing and connections for 20 mm bore of pipes all as specified and as directed. |
| 51 | S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed. |
| 52 | S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 53 | S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any capacity all as specified and directed |
| 54 | S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed |
| 55 | S & F in repair 15mm bore stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, complete all as specified |
| 56 | S & F in repair 20mm bore stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly hcomplete all as specified and directed. |
| 57 | S&F in repairsGunmetalgatevalve class I (ISI)markedwithironwheelhead,screwedbothendsforironpipe, suitableforfollowingboreofpipe includingtakingdownoldexisting unserviceablegate valve of dia 20 mm complete allasspecifiedanddirected by Engr-in-Charge |
| 58 | S&F PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls all as specified and as directed. |
| 59 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 60 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 61 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 62 | S&F PVC(SWR) 75mm dia vent cowlsall as specified and as directed. |
| 63 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 64 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 65 | S&F in repairsof Venetian blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge |
| 66 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware |
| 67 | S&Fin repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware |
| 68 | S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM ORequivalent in Marc/Cera/Parryware |
| 69 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make JaquarCat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag |
| 70 | S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of all as specified and as directed. make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag |
| 71 | S&F in repairs Soap dish holder of all as specified and as directed.make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag |
| 72 | S&Fin repairs Toilet roll holder with stainless steel flap of all as specified and as directed. Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag |
| 73 | S&Fin repairs Towel ring sqare shape stainless steel of all as specified and as directed. Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag |
| 74 | S&F in repairscorner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag |
| 75 | S & F in repairs Vitreous China urinal with fixing accessories of all as specified and as directed. make Jaguar Cat Part No :- URS-WHT-132530 or equivalent in parryware , hindware |
| 76 | S & F in repairs curved shaped urinal partition with frosted glass 10 mm (Cat Par No:JSE-CHR-110UC450X) of chrome finish brackets of all as specified and as directed. make Jaquar or equivalent in Cera/Hindware/Parryware/Prayag |
| 77 | S&F in repair concealed stop cock exposed part kit& fliush cock with fitting sleeve , operating lever & adjustable wall flange with seal of make Jaquar Cat Part No : KUP-35083KPM incl regular body of concealed stop cock suitable for 15 mm pipe line with cap of make JAquar Cat Part No:ALD-083 complete all as specified and as directed |
| 78 | S&F in repairs metropole flush valve regular 40 mm size (concealed body) with exposed shut off provision & round flange of all as specified and as directed. make Jaguar Cat part No:- FLV-1093N or equivalent in parryware/hindware/cera |
| 79 | S&F in repairs Aquisense sensor concealed type flushing valve for urinal complete set with installtion box with control cock of all as specified and as directed. make Jaquar cat part no SNR-STL-51077 or equivalent in cera /hindware /parryware |
| 80 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of all as specified and as directed. make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag |
| 81 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of all as specified and as directed. make Jaguar/Marc/Parryware |
| 82 | S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and directed. |
| 83 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and directed. |
| 84 | S&F harrison rails, aluminium anodised alloy, with fixing brackets, stops, rollars etccomplete all as specified and as directed |
| 85 | S& F of brackets decorative for curtain rails all as specified and as directed. |
| 86 | S & F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.as per architectural drawings and the directions of Engineer-in-Charge. |
| 87 | M&L 12mm thick prelaminated particle board, interior gradeprelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified. |
| 88 | S&F Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified (ISI Marked) |
| 89 | S&F brass mortice lock, vertical type size 100mm 2 levers all as specified and as directed. |
| 90 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cocer, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 91 | M&L for 30mm thick Block boards, grade 1quality, exterior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work, complete all as specified. |
| 92 | S&F Continuous (Piano) hinges, brass, width of flaps 40 mm (when open) all as specified and as directed. |
| 93 | S&F Magnet catches for cupboard shutter, brass body and striking plate with 8mm dia steel ball including letting in all as specified and as directed |
| 94 | M&L 2nd class hard wood in scantling clean sawn timber fixed all complete all as specified and as directed. |
| 95 | M&L plain fillets square rectangular or triangular in section bullnosed, splayed, chamfered or rounded on one edge or face secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm all as specified. |
| 96 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 97 | Aluminium alloy, anodised, sliding door bolt 150mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 98 | S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed. |
| 99 | Excavation over areas n.exc 1.5m deep & getting out in soft/loose soil completer all as specified & directed. |
| 100 | Excavation over area exc 1.5m wide and exc 1.5m and nexc 3.00min depth and getting out in soft/loose soil complete all as specified |
| 101 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 M in depth as in foundation in soft or loose soil and getting out complete all as specified and directed. |
| 102 | Returning, filling incl spreading levelling watering and well ramming in layers n exc 25 cm thick each layer all as specified and as directed. |
| 103 | Removing of excavated soil to a distance exc 250m but n exc 500m and deposited where directed n exc 1.5 m above the starting point all as specified and as directed. |
| 104 | M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and directed. |
| 105 | M&L for PCC 1:2:4 type B2 ( Using 40mm graded agg) as in foundation and mass concrete complete all as specified and directed. |
| 106 | M&L for Reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate) in foundation including rafts,footings, foundation beams, plinth beams, bases for columns etc, basement slabs, and mass concrete etc , all as specified. |
| 107 | M&L for RCC types A1 1:1.5:3 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 108 | M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips as specified. |
| 109 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 110 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 111 | M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces® complete all as specified and directed |
| 112 | M&L Rendering 15mm thick in two coats on fair finish of concrete surface of wall in CM (1:4) and finished the surface fair& even without using extra cement , completeall as specified and as directed |
| 113 | M&L for salt glazed stone ware drain pipes 150 mm bore grade ‘A’ laid in trenches and jointed in cement mortar (1:1) including testing complete all as specified and directed |
| 114 | M & L for cement concrete (1:4:8) type D-2 (using 40 mm grade stone aggrete)as in concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe all as specified and directed. |
| 115 | M & L for Reinforceed cement concrete Type B1, 1:2:4 (20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified. |
| 116 | Formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 117 | Formwork to sides and soffits in rough finished flat surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 118 | M & L for Loose filling with broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified. |
| 119 | S&F PVC(SWR) sewage pipe 110 mm dia single socket in any length with rubber ring joints fixed to wall or floor complete all as specified. |
| 120 | S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed. |
| 121 | M & L for precast cement concrete block masonry with solid blocks exc 10cm in width with PCC ( 1:3:6), type C-1 (using 20mm graded stone aggregate) and setting in CM ( 1:6) complete all as specified and as directed |
| 122 | AGE E/M SCHEDULE PART - IITaking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings suchasswitches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 123 | Material & Labour for Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI marked PVC Insulatedunsheathed multistranded copper cable, 1100 volts grade including PVC Casing capping (medium grade) of suitable size with all fittings and accessories including PVC rectangular board of suitable size, and FRLSH, ISI marked PVC insulatedunsheathed single core multistranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 124 | All as per Item No. 122 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 125 | All as per Item No. 122 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed. |
| 126 | All as per Item No. 122 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4.0 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 127 | S&F Modular switch, one way, 6 Amps, one modulecomplete all as specified and as directed. |
| 128 | S&F Modular switch, one way, 16 Amps, one modulecomplete all as specified and as directed. |
| 129 | S&F Modular socket outlet, 6/ 16 Amps, 2/3 pin, two modules combined with modular plate complete all asspecified and as directed. |
| 130 | S&F Modular socket outlet, 6 Amps, 2/3 pin, two modules combined with modular plate complete all asspecified and as directed. |
| 131 | Supply and fixing white cover plate with frame 3 module complete all as specified and directed. |
| 132 | Supply and fixing white cover plate with frame 2 module complete all as specified and directed. |
| 133 | Supply and fixing modular flush box/surface box 4 module complete all as specified and directed. |
| 134 | Supply and fixing modular flush box/surface box 6 module complete all as specified and directed. |
| 135 | S & F ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge |
| 136 | Supply and fixing in repair LED batten fittings 1x18/20 Watt complete pre wired fixed to wallwith 2 nos PVC block of suitable size makeCromptoncat no LCTL 18 CDL or equivalent inPhilips/Jaquar/Havells including taking down old unserviceable one . |
| 137 | S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings Make -Cromptoncat no LCTL 10 CDL or equivalent in Philips/Jaquar/Havells |
| 138 | Supply and fix water heater storage type, electric capacity 25 ltrs, BEE 5 star rated including taking down old unserviceable one. . |
| 139 | Supply and fixing PVC Exhaust fan250 mm 230 Volts Ac single phase Complete all as specified and directedincluding taking down old unserviceable one. |
| 140 | M & L , testing, instatllation, commissioning of Kitchen Exhaust Systemwith SS Hood with SS 304 Bafflet, Triple layer baffle filter 6 feet , Width 40-80(cm) , 180-200(cm), Suction Capacity 800-1200(m3/h), Air Flow : 1800m3/h, Frequency : 50Hz to 6Hz, High Velocity Hood, 18 Guage Stainless Steel Duct, Duct Velocity 1750 FPM, PDCA Motor , VoltageInput 250 V, Noise Level 60db, GI Ducting for Hot air Ventilation 60 Sqft. Corrosion Resistance, Commercial Exhaust Fan18inch Dia/EPC , Commercial Exhasut fan 450 mm sweep with 1400 RPM / including all Civil work for fixing system, make hole and replastiring esxiting wall with wall colour codeing with Basic Civil work required including fixing of Duct and complete Electrical wiring. as reqruied for system runningcomplete all as specified and directed, Make - EPC |
| 141 | Supply and fixing LED flood light 200 Watt, Green pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with suitabe sizee bracket for mouting flood light (angle iron) three core 1.5 sqmm flexible copper conductor cable from Juncation boxto connector of lightcomplete.Make- Philips/CG/Havells |
| 142 | M & L for Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-55 (11m long) conforming to IS-2713 (Part-I & II) including painting of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer from top of the pole to 1.5m above the bottom of the pole and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer upto 1.5m from bottom of the pole including numbering of poles with suitable size bracket and clamps for fixing LED street light / Flood light fittings etc as directed complete all as specified and directed.(Note: Excavation and earth work and PCC shall be measured and paid separately under respective items) |
| 143 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 144 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed. |
| 145 | Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"scomplete all as specified and directed. |
| 146 | Supply,laying, and testing XLPE cable insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size16 sqmm 4 core complete all as specfied and directed. |
| 147 | Supply,laying, and testing XLPE cable insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size16 sqmm 2 core complete all as specfied and directed. |
| 148 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in hard/dense soil and getting out complete all as specified and directed. |
| 149 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 150 | M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed. |
| 151 | Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 152 | M & L Sub class\"B\" old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed. |
| 153 | Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 40 MM dia bore complete all as specified and directed. |
| 154 | Supply and fixing Flexible cable 6 Sqmm Weather proof single flat twin core cable including pvc pipe 20 mm complete all as specfied and directed |
| 155 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. complete all as specified and as directed. |
| 156 | Supply and fixing LED flood light 70 Watt, Green pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete all as specified and as directed. Make- Philips/CG/Havells |
| 157 | S&F in repair switch piano type two way240 volts,6Amps all as specified and directedcat part No: 1066 of Anchor cona gold series or equivalent in SSK/Havells |
| 158 | S&F in repair 7 watt LED lamp B22 type complete all as specified & directed by Engr-in-Cjarge. Make : Phillips/Bajaj/Havells |
| 159 | S&F in repairlamp holder, insulated body, with back plate for batten fittingcomplete all as specified and as directed. . Make- Havells/anchor/Legrand. |
| 160 | Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, includingtaking down unservicable one.(Note: two run of 6.0 sqmm cable ,one runof earth wire of 6.0 sqmmand one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 161 | Supply and fix MCCB Distribution board , 415 voltsverticle triplepole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and directed including taking down oldunserviceable one complete all as specified and directed. |
| 162 | Supply and fixing MCCBfour pole 63 Amps, 415 Voltsincluding taking down old one all as directed complete all as specified and directed. |
| 163 | Supply and fix MCB SP , 240 Volt, 6-32 Amps, 10 KA rupturing capacity \"C\" seriesincluding taking down ole one complete all as specified and directed. |
| 164 | Excavation in trenches in soft /loose soil exceeding 1.5 m wide and not exceeding 3 m in depth for laying of cable etc and for foundation of poles , stays etc complete all as specified and as directed. |
| 165 | M&L PCC type D2, ( 1:4:8, using 40mm graded stone aggregates) as in PCC for installation area and foundation of pole etc complete all asspecified and as directed by Engr-in- Charge. |
| 166 | M&L PCC type C2, ( 1:3:6, using 40mm graded stone aggregates) as in PCC for installation area and coping / foundation of pole etc complete all asspecified and as directed by Engr-in- Charge. |
