Tender For Supply &Fixing Of Semi Automatic Ghee Pet Jar Filling &Sealing Machine (Rotary/Linear Type ), Pithoragarh-Uttarakhand

Tender For Supply &Fixing Of Semi Automatic Ghee Pet Jar Filling &Sealing Machine (Rotary/Linear Type ) 1 PLC Based Rotary/Linear Type Semi Automatic Ghee PET Jar Filling & lidSealing Machine 1.0 No. 2 Jar Conveyor- 1.50 Mtr long with drive unit, all supports and parts (excluding belt)should be made of SS-304 grade stainless steel. 1.0 No. 3 CAPACITY - 300 jar/hr, Liquid Volume- 200 ml ,500 ml and 1000 ml, for same neckdia bottles Required 4 SALIENT FEATURES: The Jar filling machine should be provided with the following features Required 5 No Jar - no filling, Very low liquid level - no filling Required 6 No Jar – no lid placement, Required 7 No Jar - no lid sealing, Required 8 Low air pressure - no mechanical movement Required 9 Possible to operate the machine without filling Required 10 Possible to operate only Rotary/Linear table, Required Required 11 Filled PET Jar counter, Required Required 12 Prevention of gear box and drive motor in case turn table gets struck due to malfunctioning of heater and printing arm. The rotary table movement should stop due to the torque coupling provided with the gearbox. Required 13 Good quality Pneumatic contact type Printing station & Device for printing the batch no, manufacturing date, price on the top of the lid/ bottom. Suitable printing system should be provided. Required 14 Jar filling station with S.S.-304 Grade buffer tank (minimum cap- 25 liter) havingmechanical float valve and over flow pipe. Required 15 It Should be suitable to fill jar having same neck dia approx 90 mm . sample bottlewill be provided to you for determination of neck dia. Required 16 The machine should have Lid placing station, Jar lid sealing station, printing station,cup pushing and lifting station, straight S.S.-304 made conveyor with S.S.-304working table for supporting the filled Jars Required 17 Suitable to increase the jar volume from 200 ml to 1000 ml. The neck/lid size of the jar will be same. Required 18 All contact parts of the machine, supports, including cup holding dies, should be of SS-304. Required 19 All the electrical parts should be of L&T or Equivalent Standard Makes. Required 20 Cup filling system while filling it to avoid any spillage of Ghee Required 21 Control panel to operate the filling mounted under the filling station. Capping will be done manually. Required 22 Control panel- Control panel in SS 304 construction complete with timers, relays andindicating lamps to perform the job filling and capping function. Required

Refer document

Refer document

Refer document