|
| 1 | Material and labour for overhauling of rolling shutters manually operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on streight for smooth movement of shutterand make it complete functional for operating upto the opening of 12 Sqm complete all as specifiedand directed by Engineer-in-Charge. |
| 2 | Material and labour for overhauling of rolling shutters manually operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on streight for smooth movement of shutter make it complete functional for operating upto the opening of exc 12 Sqm but upto 24 sqm complete all as specifiedand directed by Engineer-in-Charge. |
| 3 | Material and labour for overhauling of rolling shutters mechanically operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on streight for smooth movement of shutter make it complete functional for operating upto the opening of 12 Sqm complete all as specifiedand directed by Engineer-in-Charge. |
| 4 | Material and labour for overhauling of rolling shutters mechanically operated including greasing all components for smooth opening and closing , welding and knocking the drive plate to make it on streight for smooth movement of shutter make it complete functional for operating upto the opening of exc 12 Sqm but upto 24 sqm complete all as specifiedand directed by Engineer-in-Charge. |
| 5 | Material and labour and replacement of old tension spring with new spring of size 450 mm for shutter not exc 12 Sqm each complete all as specifiedand directed by Engineer-in-Charge. |
| 6 | Material and labour and replacement of old tension spring with new spring of size 450 mm for shutter exc 12 Sqm each complete all as specifiedand directed by Engineer-in-Charge. |
| 7 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specifiedand directed by Engineer-in-Charge. |
| 8 | Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 and framed and hung as gates, rollers for sliding on slidingMS plate including pintle hinges,/Pin type hinges stops, hand-made sliding bolts, etc.complete all as specifiedand directed by Engineer-in-Charge.Note:- The doors will be fabricated as per the site requirement. |
| 9 | Material and labour for Plates of Fe 410 W grade E-250) quality in (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specifiedand directed by Engineer-in-Charge. |
| 10 | Material and labour for runningwelding in repairs n exc 6 cm in thickness of metal to be welded complete all as specifiedand directed by Engineer-in-Charge. |
| 11 | Supply of ball bearingno 6003 to 6008 of sliding hanger gates complete all as specifiedand directed by Engineer-in-Charge. |
| 12 | Repair to MS wheel of 40 to 50 mm thick and 18 to 20 cm height including shaft and check nuts complete including hole at centre and grooves for fixing bearings complete all as specifiedand directed by Engineer-in-Charge. |
| 13 | Replacement of bavel gear box with crank handle to rolling shutters complete all as specifiedand directed by Engineer-in-Charge. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifiedand directed by Engineer-in-Charge. |
| 15 | Supply and fixing 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, : gear operated type with bevel gear box and crank handle complete all as specifiedand directed by Engineer-in-Charge. |
| 16 | Supply and fixing Safety lever locks mild steel with 4 levers for rolling shutters complete all as specifiedand directed by Engineer-in-Charge. |
| 17 | Supply and fixing Ball bearing for rolling shutters complete all as specifiedand directed by Engineer-in-Charge. |
| 18 | Supply, fabricate & FixingStructural steel/square/ roundtubular /box section ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade ST 240complete all as specifiedand directed by Engineer-in-Charge. |
| 19 | Taking down steel/woodenwindow or ventilators with chowkat or frames n.exc 1.5 Sqm each. complete all as specifiedand directed by Engineer-in-Charge. |
| 20 | Taking down steel/woodenwindow or ventilators with chowkat or frames exc 1.5 Sqm but not exc 4 sqmeach. complete all as specifiedand directed by Engineer-in-Charge. |
| 21 | Supply and fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specifiedand directed by Engineer-in-Charge. |
| 22 | Supply and fixing Transparent Fibre Sheet 5 mm thickincluding flat iron strip of required size tighten with screws for fixingin window panes of different sizes required at sitecomplete all as specifiedand directed by Engineer-in-Charge. |
| 23 | Supply and fixing Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specifiedand directed by Engineer-in-Charge. |
| 24 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specifiedand directed by Engineer-in-Charge. |
| 25 | Material and labour Brick work with sub class \"B\" brick straightor curved onplan built in cement mortar 1:6 complete all as specifiedand directed by Engineer-in-Charge. |
| 26 | Material and labour for 10 mm thick rendering in CM 1:6 on fair faces ofbrick surfaces complete all as specifiedand directed by Engineer-in-Charge. |
| 27 | Material and labour for 15 mm thick rendering in CM 1:4 on fair faces ofbrick surfaces complete all as specifiedand directed by Engineer-in-Charge. |
| 28 | Material and labour for preparation of New plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oilemulation distemper on wall etc complete all as specifiedand directed by Engineer-in-Charge. |
| 29 | Material and labour for preparation of plastered or unplastered surfaces of wallsany width or girth etc and applying two coats of exterior weather coat paint (apex Ultima)in any colour or any camoflague pattern overa coat of primer complete all as specifiedand directed by Engineer-in-Charge. |
| 30 | Dismantling framedfillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specifiedand directed by Engineer-in-Charge. |
| 31 | Supply, fabricate & FixingStructural steel/square/ roundtubular /box section ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade ST 240complete all as specifiedand directed by Engineer-in-Charge. |
| 32 | Supply and fixing welded steel wire fabric not exc 4 Kg/Sqm welded to steel members complete all as specifiedand directed by Engineer-in-Charge. |
| 33 | Material and labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxideupto the height 12 Mtr. complete all as specifiedand directed by Engineer-in-Charge. |
