Tender For Work For Arc Based Work For Fabrication Of Steel Materials At Talad Village, Olpad Ta. Under Rander Division, Adajan-Gujarat

Tender For Work For Arc Based Work For Fabrication Of Steel Materials At Talad Village, Olpad Ta. Under Rander Division--1 Fabrication Of Anchor Rod From 16 Sq.Mm Ms Round Bar & 65 Mm X 65 Mm X 6 Mm / 50 Mm X 50 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 10.00 2 Fabrication Of Eye Bolt From 16 Sq.Mm Ms Round Bar With Supplying Of 2 ( Two ) Nuts Of Suitable Size As Per Approved Drawing And Requirement Of The Company. No. 22.22 3 Fabrication Of Turn Buckle From 16 Sq.Mm Ms Round Bar & 65 Mm X 65 Mm X 6 Mm / 50 Mm X 50 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 11.11 4 Fabrication Of 11 ( Feet ) Long Top / Bottom / D.O. Angle From 65 Mm X 65 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 22.22 5 Fabrication Of 9 ( Feet ) Long Top / Bottom / D.O. Angle From 65 Mm X 65 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 22.22 6 Fabrication Of 4.6 ( Feet ) Long Tapping / Bracing Angle From 65 Mm X 65 Mm X 6 Mm / 50 Mm X 50 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 11.11 7 Fabrication Of 2.3 ( Feet ) Long Bracing / Support Angle From 65 Mm X 65 Mm X 6 Mm / 50 Mm X 50 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 8.89 8 Fabrication Of 11Kv Ht V Cross Arm From 65 Mm X 65 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 38.89 9 Fabrication Of 11Kv Ht Top Fitting From 65 Mm X 65 Mm X 6 Mm M.S. Angle And 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. No. 12.22 10 Fabrication Of 22Kv Ht Top Fitting From 65 Mm X 65 Mm X 6 Mm M.S. Angle And 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. No. 15.55 11 Fabrication Of 22Kv Ht V Cross Arm From 65 Mm X 65 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 45.55 12 Fabrication Of Guy Clamp Pair Suitable For Psc Pole From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. Pair 6.67 13 Fabrication Of U Clamp From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. No. 3.33 14 Fabrication Of C Clamp Suitable For All Type Of Psc Pole From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. No. 4.44 15 Fabrication Of C Clamp Suitable For Rsj Girder Pole From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. No. 4.44 16 Fabrication Of Three Hole Patti From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. No. 2.22 17 Fabrication Of 11 ( Feet ) Long Top / Bottom Channel From 100 Mm X 50 Mm X 5 Mm M.S. Channel As Per Approved Drawing And Requirement Of The Company. No. 34.44 18 Fabrication Of 9 ( Feet ) Long Top / Bottom Channel From 100 Mm X 50 Mm X 5 Mm M.S. Channel As Per Approved Drawing And Requirement Of The Company. No. 34.44 19 Fabrication Of 11 ( Feet ) Long Angle Bracing From 50 Mm X 50 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 20.00 20 Fabrication Of 9 ( Feet ) Long Angle Bracing From 50 Mm X 50 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 20.00 21 Fabrication Of 11 ( Feet ) Long Channel Welded From Assorted Length Of Scrap Channel As Per Approved And Requirement Of The Company No. 57.77 22 Fabrication Of 9 ( Feet ) Long Channel Welded From Assorted Length Of Scrap Channel As Per Approved And Requirement Of The Company No. 57.77 23 Fabrication Of Guy Clamp Pair Suitable For 10 Mtr Psc Pole From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. Pair 7.78 24 Fabrication Of Guy Clamp Pair Suitable For 9 / 11 Mtr Rsj Girder Pole From 50Mm X 6 Mm M.S. Flat As Per Approved Drawing And Requirement Of The Company. Pair 7.78 25 Fabrication Of 5 ( Feet ) Long Tapping Angle From 65 Mm X 65 Mm X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 8.89 26 Fabrication Of H.T. Extn Suitable For 22Kv System From 65 X 65 X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 229.98 27 Fabrication Of H.T. Extn Suitable For 11Kv System From 65 X 65 X 6 Mm M.S. Angle As Per Approved Drawing And Requirement Of The Company. No. 229.98 28 Fabrication Of 750 Mm Long Channel For Ht Ab Conductor From 100 Mm X 50 Mm X 5 Mm M.S. Channel As Per Approved Drawing And Requirement Of The Company. No. 33.33 29 Fabrication Of 22 Kv Ht V Cross Arm From 100 Mm X 50 Mm X 5 Mm M.S. Channel As Per Approved Drawing And Requirement Of The Company. No. 138.88

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	02-09-2023			15-09-2023
2	05-10-2023			20-10-2023
3	15-09-2023			25-09-2023
4	17-08-2023			25-08-2023
5	20-10-2023			20-11-2023
6	20-11-2023			15-12-2023
7	25-08-2023			02-09-2023
8	25-09-2023			05-10-2023

INR 1180 /-

INR 4990.0 /-

INR 4.99 Lakhs /-