Dismantling Of Existing False Ceiling., mumbai-Maharashtra

Dismantling Of Existing False Ceiling. Carefully Dismantling The Existing Gyp Board False Ceiling Along With The Entire Steel Frame Work And Also Removing The Existing Thermal Insulation Abutting The Rcc Ceiling, Removing The Fasteners Of Steel Hangers Completely, Carrying The Loose Debris In Gunny Bags And Stacking The Same At Directed Place, Carting Away The Same Out Of The Bank?S Premises 2 2 New Plain Gyp Board Suspended Ceiling Providing And Fixing Plain 12.5 Mm Thick Gypsum Board ( Pl ) False Ceiling With New Suspended ?Gyp Sera? Gi Framing At Almost 3.0 To 3.5 Meter Height Above The Existing Floor Finish Level Suspended From The Existing Rcc Slab Approximately 1.0 To 1.5 Meter Below The Soffit Level In Combination With 2? X 2?- ?T? Grid Ceiling, All As Per The Specifications Of The Approved Manufacturer Preferably M / S. Saint Gobain And As Per Their Following General Specifications 3 3 Mineral Fibre Acoustical Suspended T Grid False Ceiling System. Supply And Installation Of Mineral Fibre Acoustical Suspended ?T Grid False Ceiling System Using 15Mm Thick ?Dune Max? Tegular? 15 / 90 Edge Tiles With Silhouette Black Reveal Of 15Mm Face Exposed Grid And 38 Mm Wide Framing To Be Erected At Almost 3.0 To 3.5 Meter Height Above The Existing Floor Finish Level And Suspended From The Existing Rcc Slab Approximately 1.0 To 1.5 Meter Below The Soffit Level Of Slab 4 4 Acrylic Emulsion Paint Over New False Ceiling Providing And Applying 2 Or More Coats Of First Quality Acrylic Emulsion Paint On New Gyp Board False Ceiling And Pop Molding Of Approved Brand And Shade Over A Coat Of Similar Acrylic Primer Including Making Base Preparation By Doing 2 Coats Of 1St Quality Putty Work By Using Birla White Putty Including Scraping The Existing Surface For Receiving The Paint Etc 5 5 Under Deck Thermal Insulation To Ceiling. Providing Fixing 25Mm Thick Underdeck Thermal Insulation Provide To The Original Rcc Ceiling Using Closed Cell Elastomeric Nitrile Rubber Foam Shall Have Following Technical Properties, I ) Material To Be Used Shall Be Closed Cell Flexible Elastomeric Foam Based On Synthetic Rubber Composition With Fire Retardant Properties. Ii ) Thermal Conductivity: As Per Astm C 518 6 6 Cgst Enter Total Cgst 7 7 Sgst Enter Total Sgst 8 8 Rebate Enter Rebate If Any Inclusive Of Gst

Refer document

Refer document

Refer document