Bids Are Invited For Excavation For All Types And Sizes Of Foundations, Trenches And Drains Or For Any Other Purpose Including Disposal Of Excavated Stuff Upto 1.5 M Lift And Lead Upto 50M (At Least 5M Away From The Excavated Area), Including Dressing A, Bilaspur-Chhattisgarh

Bids Are Invited For Excavation For All Types And Sizes Of Foundations, Trenches And Drains Or For Any Other Purpose Including Disposal Of Excavated Stuff Upto 1.5 M Lift And Lead Upto 50M ( At Least 5M Away From The Excavated Area ) , Including Dressing And Leveling Of Pits. Providing And Placing In Position M-15 R.C.C Excluding Cost Of Reinforcement, Form Work But, Including Vibration, Finishing, Curing And Cleaning Etc., Complete With Graded Metal Of Maximum Size- 20 Mm, Complete As Per Drawing Design And Specification With All Lead, Lift And Transportation Of Materials With Labour Charges And As Per Directed By Engineer In-Charge. Filling Foundation Around Masonry Works With Materials Obtained From Spoils Including Watering And Ramming I / C 50 M Lead. Supplying, Installation, Test And Trial Of Solar Submersible Pump ( Pmdc / Bldc ) Having 20 Hp / 15 Kw, Ss Body, 380V, 2850 Rpm, 2000-3000 Lpm At 20 Metres Head With Controller And Required Length And Sizes Of Cable Wires And All Accessories Solar Module / Photo Voltaic ( Spv ) Array: Spv Array Contains Specified Numbers Of Same Capacity, Type And Specifications Modules Connected In Series To Obtain The Required Voltage Or Current Output. Spv Water Pumping System Should Be Operated With A Pv Array Minimum Capacity Should Be 24000 Watt Peak Measured Under Standard Test Conditions. Modules Supplies Should Have Certificate ( Maximum One Years Old ) Is14286 / Iec 61215 Specifications Or Equivalent National Or International / Standard. Module Must Qualify To Is / Iec 61730 Part-1 And Part-Ii For Safety Qualification Testing. Minimum Module Efficiency 15% And Fill Factor Shall Be More Than 70%. Module Must Qualify To Iec Ts 62804-1:2005. Name Plate Shall Confirm The Is 14286 / Iec61215 Must Have Clear And Inedible Marking Laminated Inside The Glass As Per Is / Iec61730-1, Clause 11. Pv Modules Must Be Warranted For Output Wattage, Which Should Not Be Less Than 90% Supply & Fixing In Position Ball Valve For Upvc Pipe Line Including All Accessories & Materials, Complete As Per Drawing, Design And Specification With All Lead, Lift And Transportation Of Materials With Labour Charges And As Per Directed By Engineer In- Charge Supply & Fixing In Position Non Return Valve For Upvc Pipe Line Including All Accessories & Materials Complete With Graded, Metal Of Maximum Size- 20 Mm, Complete As Per Drawing Design And Specification With All Lead, Lift And Transportation Of Materials With Labour Charges And As Per Directed By Engineer In-Charge. 250Mm Dia 160Mm Dia Supply & Fixing In Position Air Pressure Release Valve Suitable For 250 Mm Dia. Upvc Rigid Agriculture Pipe Line Including All Accessories & Materials Required, Complete As Per Drawing Design And Specification With All Lead, Lift And Transportation Of Materials With Labour Charges And As Per Directed By Engineer In-Charge. Providing And Fixing Of Scheme Information Board Consisting Of Isa & M.S.Plate, Having Size 0.6 Mx 0.6M Fix At Height Above 1.5 Metres From G.L., Including Excavation, Base Concreting ( M-15 ) , Priming, Painting Two Coats Synthetic Enamel Paint On New Surface Including Painting Figring Logo And Slogan About The Project Etc. Providing And Fixing M.S. Grill Of Approved Pattern Made Of M.S. Flats Or Square Or Round Bars Welded To Steel Frame Of Windows Etc. Including Applying A Priming Coat Welded To Frame With All Necessary Fitting Complete Including Applying A Priming Of Red Oxide Zinc Chromate Primer. Providing And Fixing M.S. Frames Of Doors, Windows, Ventilators And Cupboards Joints Mitred And Welded With 15X3 Mm Lugs 10Cm Long Embedded In Cement Concrete Blocks 15X10x10cm Of Grade M-10 Or With Wooden Plugs And Screws Or With Dash Fastener Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Angle-Iron Frames, Complete As Per Drawing Design And Specification With All Lead, Lift And Transportation Of Materials With Labour Charges And As Per Directed By Engineer In-Charge. Total Quantity : 6348

Refer document

Refer document

Refer document