Supply Of Coronary Engiography Kit And Its Related Consumables , Group A: Coronary Angiography ( Items Used In Cath Lab ) , ( A ) Angio Guidewire Hydrophylic 0.035 / 0.023 – J / 0.032 J-Tip 150 Cm - Us Fda And Japan Pmda And Dcgi Approved ( B ) Angio Guidewire Hydrophylic 0.035 / 0.023 – J / 0.032 J-Tip 260 Cm - Us Fda And Japan Pmda And Dcgi Approved , Angio Guidewire 0.035 – J / 0.032 J-Tip 150 Cm Translumina Or Equivalent , Angio. Cath. Al1 / Al2 / Al3 – 5F, 6F , Angio. Cath. Ar1 / Ar2 / Ar3 – 5F, 6F , Angio. Cath. Jl -3.0 / 3.5 / 4.0 / 4.5 / 5.0 ( 5F & 6F ) , Angio. Cath. Jr. 3.0 / 3.5 / 4.0 ( 5F & 6F ) , Angio. Cath. Pigtail 4F / 5F / 6F , Ima - 6F / 7F , Multipurpose6f, 7F , Peadiatric Input Sheath 4F / 5F , ( A ) Radial Sheath 5F / 6F- Us Fda And Japan Pmda And Dcgi Approved ( B ) Femoral Sheath 5F / 6F-U Us Fda And Japan Pmda And Dcgi Approved , Two Locking Mechanism ( A ) Snap On / Click Off ( B ) Rotating Type. Have Unique Intro Cross Cut Valve Which Maintain Uncompromised Hemostasis To Avoid Bleeding.Radial Sheath 5F / 6F Or Equivalent , Tiger 5F / 6Fcatheter- Us Fda And Japan Pmda And Dcgi Approved , Tiger 5F / 6F Catheter Equivalent Tig 2 Inner Diameter To 0.050 With Maximum Pressure Upto 1200 Psi. , Angiographic Catheter – Tig Curve Comprised Of A Two-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Polyurethane And Polyamide Elastomers. •Must Have 32 Strands Of Stainless-Steel Braid. •Must Have The Shaft Inner Layer And Outer Layer Contain Barium Sulphate. •Must Have Anti-Kinking Protector Sleeve, With Non-Braided Tip Shaft ( Distal -2 Cm ) . •Trans Radial Catheter Must Have Shapes Designed To Cannulate Left And Right Coronary Arteries Tig, Tig Ii, Jacky, Sarah. •Must Be Available In 4F, 5F, 6F Sizes •Must Have Inner Diameter Of 4F = 1.03Mm, 5F= 1.20Mm, 6F = 1.30Mm •Usfda And Pmda –Approved , Dye ( Non-Ionic Contrast Agent 100Ml It Should Be Us Fda / Ce & Dcgi Approvediohexol As Salt Name With 350 Mg / Ml Concentration , Iodixanol As A Salt Name 320Mg / Ml With Plastic Bottle With Hanger 100Ml Pack , ( A ) Femoral Sheath 5F / 6F / 7F / 8F / 9F / 10F / 11F / ( B ) Femoral Long Sheath 30 To 50 Cm , Unilock Syringe 10 Ml , Iv Cannula ( 18, 20, 22 G ) , Disposable Ecg Electrodes For Adults- Us Fda / Ce & Dcgi Approved • Adult Diaphoretic Foam Electrodes. • Should Be Pre-Gelled, Peel And Stick Electrode With Excellent Adhesion • Should Have No Residue Once Removed Should Conform To Or Exceed The Highest Industrial Standard For Ecg Electrodes, Quality Certification From Authorized Agencies To Be Provided , Cd – R Media With Atleast 700 Mb Storage And Atleast 52X Recordable Speed Dvd , Pressure Monitoring Line 200Cm , Manifold ( Two Port ) ( Right On ) , High Pressure Line - 200 Cm , Dvd , Docking Wire , Swan Ganz Catheter - Ce Approved - 6F / 7F Us Fda / Ce And Dcgi Approved , Gadoteric Acid 10 Mlvial With Usfda Approved , Gadotericacid20 Ml Vials With Usfda Approved , Radial Artery Haemostasis Device- ( T.R. Band ) Consists Of Two Balloon Specially Designed For Spot Compression Of The Radial Puncture Site. Must Have Belt Magic Tape For Fast Application •Must Have Curved Support Plate. Must Have Green Positioning Marker. •Must Be Available In 2 Sizes – 24Cm And 29Cm Usfda+Pmda Approved• , Special Slender Sheath ( Gss ) Must Have Unique Thin Wall Technology Reducing The Outer Diameter By 1• Fr Size Whilst Maintaining The One Size Lager Inner Diameter. Must Have 7Fr Sheath With Outer Diameter Of 2.8Mm, 6Fr With Od Of• 2.46 Mm & 5Fr With Od Of 2.13Mm. Hydrophilic M Coating With 20 / 21G Surflash Needle And Tif Tip• Technology Which Provide Optimal Tapering Design. Usfda / Pmda Approved• , Group B: ( Consumable For Ptca ) , ( A ) Judkins Guiding Catheter ( Jr Jl & Pigtail Ebu, Routine And Sidehole Catheterxb, Xbr ( Terumo, Cordis, Meditronic, Boston Scientific, Translumina ) Or Equivalent Qualityus Fda / Ce & Dcgi Approved • 4 French / 5 French / 6 French / 7 French / 8French Size Left And Right Judkins Catheters In Various Standard Curves And Lengths. , Special Guiding Catheter – Ikari Curve •Must Have Ikari Curve For Radial Route. •Must Have Stainless Steel Flat Wire Braid •High Strength Wired Braided Catheter With Inner Layer Of Ptfe With Fluoropolymer. •Must Have Zone Technology - Five Zone Each Fabricated From A Material Of Different Stiffness. •Must Have Larger Lumen.6Fr Id - .071 •Usfda / Pmda Approved , Ptca Inflation Device – Us Fda Approved , Nih Catheter Us Fda / Ce & Dcgi Approved • 4 French / 5 French / 6 French / 7 French / 8French In Various Standard Curves And Lengths. , Cournard Guidingcatheter Us Fda / Ce & Dcgi Approved • 4 French / 5 French / 6 French / 7 French / 8French In Various Standard Curves And Lengths. , Double Lumen Thrombo-Aspiration Catheter , ·Swan Ganz Catheter , Vascular Closure Device With Bio Absorbable Pga Suture That Provide A Secure Seal, , Bioabsorbable Collagen Designed To Conform To The Arteriotomy For Confident Closure, And Low Profile Bioabsorbable Anchor ( 50:50 Blend Glycolideandlactidepolyer ) To Fit Closely Against Arterial Wall Leaving Blood Flow Undistributed While Maintaining Vessel Diameter. Againt . , Ptca Inflation Device- Us Fda / Ce & Dcgi Approved • Efficient Locking System To Maintain High Pressure • Rapid Inflation And Deflation • Clear Barrel For Easy Visualization Of De-Bubbling • Luminescent Analog Pressure Gauge ( Up To 30 Atm ) • Ergomatric And Use Friendly Hand Held Design. , ( A ) ( Haemostatic Y-Connector ) For Ptca – Push Mechanism - Us Fda / Ce & Dcgi Approved • Should Accommodate Virtually All Interventional Devices • Luer Connector At The Guiding Catheter End • Rotating Adapter At The Guiding Catheter End • Should Have Bleed Back Safety Mechanism • Stepwise Control For Open, Semi-Open And Closed Position ( B ) Ptca Y Connector 400 Kpa Leak-Proof Seal From Proprietary Designed Valve, *7F-9F Compatible Lumen Allowing Delivery Of Wide Range Of Devices And Torque And Introducer Fit 0.014-0.021 Guide Wire. , Hydrophilic Guidewire With Mcoat Technology Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. •One Piece Construction & Radiopaque Polyurethane Jacket. •Must Be Available In Standard And Stiff. •Must Be Available In .035, .032, .038, .025, .018 Diameter And 260 Cm Length - Straight / Angled / 1.5 Mm J Shape •Usfda And Pmda Approved , ( A ) Baby J Wire With 1.5Mm J Tip – 180 Cm And •Baby J Curve Must Have Radius Of 1.5 Mm. •Super Elastic Nitinol Alloy, M Coat Hydrophilic Coat, •One Piece Construction For 1:1 Torque & Radiopaque Polyurethane Jacket. •Must Have Tungsten-Infused Polyurethane Jacket. •Usfda And Pmda Approved ( B ) Baby J Wire With 1.5Mm J Tip – 260 Cm And •Baby J Curve Must Have Radius Of 1.5 Mm. •Super Elastic Nitinol Alloy, M Coat Hydrophilic Coat, •One Piece Construction For 1:1 Torque & Radiopaque Polyurethane Jacket. •Must Have Tungsten-Infused Polyurethane Jacket. •Usfda And Pmda Approved , .014” One Piece Core Workhorse Wire With Jointless Spring Coil With Sion Technology Having Composit Core With Actone Inside Length 28Cm Tip Load 0.7 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014” One Piece Core Workhorse Wire With Jointless Spring Coil With Sion Technology Having Composit Core With Actone Inside Length 20Cm Tip Load 0.5 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014” On E Piece Core Workhorse Wire With Jointless Spring Coil With Sion Technology Having Composit Core With Actone Inside Length 22Cm Polymer Sleee Length With Slip Coat Coating Over The Polymer Sleeve Tip Load 0.8 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014” On E Piece Core Workhorse Wire With Jointless Spring Coil 22 Cm Polymer Sleev Length With Slip Coat Coating Over The Polymer Sleeve Tip Load 1Gm 180 Cm Length Tip Radiopacity 3 Cm , Extra Support 0.014Wire; 0.7 Gf Tip Load Tip Radio Opacity 4 Cm 180 Cm Length Ptfe Coating Over The Shaft Silicone Coating Ovr Spring Coil , .014 One Piece Core Workhorse Wire With Jointless Spring Coil With Polymer Jacket With Sion Technology Having Comosit Core With Actone Inside Length 28 Cm With Tip Load 0.8 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014 One Piece Core Workhorse Wire With Jointless Spring Coil With Polymer Jacket With Sion Technology Having Comosit Core With Actone Inside Length Tip Radiopacity 3 Cmwith Tip Load 0.5 Gm , .014 One Piece Core Workhorse Wire With Jointless Spring Coil With Tapering To .009” 0.8Gf Of Tip Load; 16 Cm Plymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve, 190 Cm Length Tip Radiopacity 16 Cm , .014 One Piece Core Cto Wire With Jointless Spring Coil Ptfe Coating Over The Shaft, Tip Load 3G, Tip Load 3G, 4.6 G And 12G, 180 Cm Length With Tip Radiopacity 11 Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Coating Over The Spring Coil Tapering To .009” Tip Load 9G 180 Cm Length Tip Radiopacity 20 Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Coating Over The Spring Coil Tapering To .009” Tip Load 12G 180 Cm Length Tip Radiopacity 20 Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Coating Over The Spring Coil Tapering To .008” Tip Load 20G 180 Cm Length Tip Radiopacity 17 Cm , .010” One Piece Core Wire With Joint Less Spring Coil Length 15 Cm Cone Tip With A Tip Load Of 3.5 Gm 190 Cm Length Tip Radiopacity 15 Cm , Ptca Guide Wire – Core Material Elastinite Nitinol For Excellent Flexibility And Durability, Shaping Ribbon For Excellent Shape Retention And Atraumatic Tip Load Less Than 0.65 Gm With Regular Length, Regular Shaft Support And Floppy Tipus Fda / Ce & Dcgi Approved , Ptca Guide Wire-Durasteel Stainless Steel For Durability And Excellent Torque Control, Full Polymer Jacket, Core To Tip Design For Precise Steering And Tip Control, Various Tip Loads 0.8 Gm To 1.2 Gm For Complex Anatomies, Hydrophilic Coating For Longer Lasting Lubricity. Us Fda / Ce & Dcgi Approved , Ptca Guide Wire – Exchange Length Us Fda / Ce & Dcgi Approve , Ptca Guide Wire-Durasteel Stainless Steel For Durability And Excellent Torque Control, Full Polymer Jacket, Core To Tip Design For Precise Steering And Tip Control, Various Tip Loads 1.5 Gm To 4.1.Gm For Complex Anatomies, Hydrophilic Coating For Longer Lasting Lubricity. Us Fda / Ce & Dcgi Approved , Ptca Guide Wire – Hydrophilic Coated, Exchange Length Us Fda / Ce & Dcgi Approved , Ns Ptca Wire Floppy. Extra Floppy Intermediate & Hypercoat Including Cto Wires .014Diameter Ptca Wires With Directly Jointed Sus And Nitinol Shaft Through Duocore Technology For Superior Torque Transmission Available In Various Tip Loads- Us Fda And Japan Pmda And Dcgi Approved , Extra Floppy Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 / 300 Cm Length •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have Ptfe Coating From 25 To 180 Cm Length. & Mucus Coat Hydrophilic Coating Up To 248 Mm •Should Have 0.6-Gram Force Tip Loads •Usfda+Pmda , Floppy Tip Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length. •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm, & Ptfe Coating From 25 To 180 Cm Length. •Should Have 1 Gram Force Tip Loads •Usfda+Pmda , Hypercoat Ptca Guide Wire With 9.7-Gram Force Rail Support– Mucus Coated Hydrophilic Distal Tip, 0.014” Diameter And 180 / 300 Cm Length •Must Have Platinum Coil At Distal Tip. 14 Mm Tip Shape Length. •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 250 Mm & Ptfe Coating From 25 To 180 Cm Length. •Should Have 1-Gram Fore Tip Load •Usfda+Pmda , Cto Stiff Ptca Guide Wire - 3.6-Gram Force Tip Load – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length. •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm & Ptfe Coating From 25 To 180 Cm Length. •Should Have 3.6-Gram Fore Tip Load •Usfda+Pmda , Micro Catheter To Be Used For Cto Fine Cross Antegrade And Retrograde Apporch. -Us Fda / Ce & Dcgi Approved , Aspiration Thrombectomy Catheter • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Must Have 1.30 Mm Square Suction Area • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. • Pmda And Dcgi Approved , Cto Indicatedsemi-Complaint Balloon With Slim Seal Technology On Distal Tip With Lesion Entry Profile Of 0.017, Crossing Profile Of 0.021 And Single Flexible Tungsten Marker Available In Unique Diameter Of 1.2Mm With Variety Of Lengthsus Fda / Ce & Dcgi Approved , Ptca Balloon ( Non-Compliant ) -Us Fda / Ce & Dcgi Approved • Quote Both Monorail ( Rapid Exchange ) And Otw Balloons • Available In All Sizes From 2 - 4.0 Mm, Variable Lengths Should Have A Very High Rated Burst Pressure , Ptca Balloon Ultra Lowentry Profile Balloon With 0.016 Entry Profile, Thin Marker Of 25Micro Milimeter And Core Wire Shaft For Batter Pushabilty With Widerange From 1Mm To 4Mm Diameter. , Ptca Balloon Semi Compliant Cto Balloon With Ultra Low Entry Profile With 0.40Mm Or 0.016 And Entry Profile From 1.25*10 To 2.25*10 Remains Same For Crossablity Even With Higher Diameter Balloon. , Ptca Balloon Semi Compliant Balloon With Entry Profile Of0.40Mm Or 0.016 Or Execellentcrossablity ( A ) Sirolimus Drug Eluting Balloon With Nano Carriers Ce Marked ( B ) Drug Coated Balloon - Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate& Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time. Available In Sizes- 035 Guidewire Compatible – 120 Cm Shaft - 4Mm -6Mm Dia, Lengthupto 150Mm, 035 Guidewire Compatible – 75Cm Shaft – 5Mm – 12 Mm Dia, Length 60Mm, 014 Guidewire Compatible – 150 Cm Shaft – 2Mm To 3.5Mm Dia, Length 120 Mm , High Pressure Ptca Dilatation Catheter With Small Entry Profile Of 0.43Mm And Small Balloon Profile Of 0.034” With Special Silicon Coating On Balloon To Avoid Mellon Seed Effect. • Small Distal Shaft Profile Of 2.5-2.6Mm To Allow Kbt In 6Fr Large Lumen Guiding Catheter. , Lesion Entry Profile - 0.016 / Nominal Pressure - 12 Bars / Rbp - 22 Bars / Impeccable Tip / Hydrophilic Coated / Non-Compliant Balloon / Prime Shaft , Dual Layer / Rbp 35 Bars / Abp 45 Bars / Strictly Non-Compliant , Ptca Balloon ( Semi Compliant ) – ( Usfda Approved ) Monorail, Bi Segment Inner Lumen Shaft, Monorail Catheter, Z Glide Coating, Proximal Shaft – 2.6Fr, Distal Shaft – 2.3 Fr, Balloon Material Opti Leap, Delivery System Working Length 143 Cm Size 1.2, 1.5, 1.2 Push, 1.5 Push, 2-4Mm Dia X 8, 12, 15, 20, 30 Lengths , ( A ) Ptca Balloon ( Non Compliant ) – ( Usfda Approved ) Bi Segment Inner Lumen Shaft, Monorail Catheter, Z Glide Coating, Proximal Shaft – 2.6Fr, Distal Shaft – 2.3 Fr, Balloon Material Opti Leap, Delivery System Working Length 143 Cm Size - 2-6Mm Dia X 6, 8, 12, 15, 20, 30 Lengths ( A ) High Pressure Non-Compliant Balloon With Innovative Triple Layer Balloon Technology With High Pressure Resistance Of 22 Atm. Must Have Elastomer Outer Layer, Middle Layer Of Polyamide And Inner • Most Layer Of Elastomer. Must Have Nominal Pressure Of 12Atm And Rbp Of 22Atm. •Shorter Thin Distal Tip Of 2.9Mm With Low Entry Profile Of 0.43 Mm. Must Have Hydrophilic Mucus Coating Must Have 3.0 Mm Short Taper Balloon Shoulder& Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile.Must Have 2.6 French Stainless Steel Core Wire Structured Shaft•& Stainlesssteel Stylet In Mid Shaft. Must Have Hypotube Without Ptfe Coating. Must Have Three Pleats Re-Wrappable Structure. Pmda+Ce Approved• , Cto Balloon With Ultra – Ultra Low Entry Profile Of 0.016 Must Have Hydrophilic Mucus Coating. •Should Have Smallest Diameter 1.00Mm And 5Mm Length. •Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. •Must Have Flexible Tip With Short Balloon Bonding Part Of 0.4Mm. •Nominal Pressure Of 06 Atm And Rbp Of 14 Atm •Must Have 2.4 To 2.7 French Tapered Stainless Steel Core Wire Structured Shaft. •Must Have Three Pleats Re-Wrappable Structure. •Pmda+Ce Approved , Dual Layer / Rbp 35 Bars / Strictly Non-Compliant ( Only 10% Growth ) / Andfor Super High Pressure Ptca, A Manometer Of 55 Atm , Cto Nc Balloon Diameter 0.85 Mm Entry Profile .016 Rbp 21 Hydrophilic Single Proximal Marker. , Dedicated Dual Lumen Micro Catheter For Side Branch Access , Thrombus Aspiration Catheter With Removable Core Wire And 30Cm Hydrophilic Coating From The Tip; Available In 6F And 7F , Semi-Complaint Ptca Balloon With Smallest Entry Profile Of 0.0157, Tapered Balloon Shape, Unique Tri-Fold Wrapping Technology, Tr2 Hydrophilic Coating; Available In Lowest Profile 1 Mm Diameter, Longer Shaft Length Of 146Cm. , Non-Compliant Ptca Balloon With Highest Rbp Up To 22 Atm; Tapered Balloon Tip To 4Mm With Lowest Shoulder Angle To 32 Deg; Available In Lowest Profile 1.5Mm Diameter, Longer Shaft Length Of 146Cm. , Special Ptca Balloon ( Non-Compliant ) For Post Dilation. Must Have Diameter Starting From 1.75 Mm-5.0 Mm. Balloon Material Must Be Nylon For Controlled Compliance. Quote Both Monorail ( Rapid Exchange ) Balloon. Ce Approved , Cutting Balloon For Ptca Having Microsurgical Atherotomes ( Blades ) - Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Balloons Available In The Sizes And Lengths , Wire Based Scoring Balloon Cathethr. Us Fda / Ce & Dcgi Approved • Available In The Sizes And Lengths Monorail ( Rapid Exchange ) , Everolimus Eluting Stent. Cobalt Chromium With 60 Microns Strut Thickness. Hydrophilic Coating On 3 Mm Balloon Shaft. Biodegradable Coating Only On Abluminal Side. , Sirolimus Eluting Stent. Cobalt Chromium With 60 Microns Strut Thickness. Hydrophilic Coating On 3 Mm Balloon Shaft. Biodegradable Coating Only On Abluminal Side. , High Pressure Semi Complaint Ptca Balloon Must Have Low Entry Tip Profile Equal To Or Less Than 0.016 Should Have Nominal Pressure 6 Atm Or Above And Rbp Above 14 Atmmust Be Available In Diameter 1.0 Mm Along With Other Size Matrix Starts From Diameter 1.75 Mm To 4 Mm Quote Both Monorail And Otw Balloonus Fda / Ce & Dcgi Approved , Special Ptca Balloon ( Non Complaint ) For Post Dilations Must Have Diameter Strating From 1.75 Mm To 5.0 Mm Balloon Material Must Be Nylon For Controlled Compliance. Quote Both Monorail And Otw Balloonus Fda / Ce & Dcgi Approved , Semi Complaint Balloon - Thin Multi-Layer Balloon, Tri Fold Balloon Design For Good Rewrap, Semi-Complaint Coronary Balloon With Laser Bond Technology On Distal Tip With Crossing Profile Of 0.021”, Tip Entry Profile Of 0.017”, Nominal Pressure Of 8Atm And Rbp Of 14Atm Available In Diameter 1.20-4.00Mm And Lengths 6Mm -30Mmus Fda / Ce & Dcgi Approved , Non-Complaint Coronary Balloon With Tri-Fold Layers And Tip Entry Profile Of 0.018” With Nominal Pressure Of 12Atm And Rbp Of 18Atm. Excellent Flexibility And Tight Rewrap With Flat Compliance For Excellent Stent Apposition, Available In Diameter 2.0-4.5Mm And Lengths In 8Mm-25Mmus Fda / Ce & Dcgi Approved , Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tiploads Between 0.6-0.8Gm And Lengths ( 190 / 300Cm ) Us Fda / Ce & Dcgi Approved , Semi-Complaint Coronary Balloon With Slim Seal Technology On Distal Tip With Crossing Profile Of 0.021”, Lesion Entry Profile Of 0.017” And Microglide Coating Available In Diameter 2.25-5.00Mm And Lengths 6-30Mmus Fda / Ce & Dcgi Approved , Special Ptca Balloon Non-Complaint Coronary Balloon With Multilayer Crossflex Balloon Technology And Round Tip With Lesion Entry Profile Of 0.018” Available In Diameter 1.5Mm-5Mm And Lengths In 6Mm-25Mm With Skive Technology On Mid Shaft Of Dilatation Catheterus Fda / Ce & Dcgi Approved , Workhorse Guidewire With Durasteel Core, Responsease Core Grind Technology With Hydrophilic Coating And 1Cm Uncoated Distal Tip For Tactile Feedback Available In Multiple Variants With Same Tipload Of 0.9Gmus Fda / Ce & Dcgi Approved , Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tiploads Between 0.6-0.8Gm And Lengths ( 190 / 300Cm ) .Us Fda / Ce & Dcgi Approved , Cto Indicated Penetration Guide Wire For Antegrade Wire Escalation ( Awe ) Technique With Unique Micro Textured Tip For Cap Engagement And Tapered Tip For High Penetration Powers. Tip Load 11 To 14 Gm Penetration Power – Above 160 Kg / In2us Fda / Ce & Dcgi Approved , Tuohy Borst ( Haemostatic Y-Connector ) For Ptca Push Pull Mechanism – Us Fda , Amplatz Wire – Ptee Coated – ( Regular Length ) .035 Large Stainless Steel ( Ss ) Core With Ss Flat Wire Coils Gradual Taper With Core To Tip Support And Flexibility For Atraumatic Navigation Through Fortuous Anatomy 150 Cm And 180 Cm Usfda Approved , Group C: Stents , Stainless Steel Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Stainless Steel Coronary Stents, Premounted On Balloon –Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Cobalt Chromium Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Cobalt Chromium Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Covered Coronary Stents – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Both • Available In The Sizes And Lengths • Covered Graft Stent For Dissectedartery , Stainless Steel Renal Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Zotarolimus Eluting Stent - Us Fda / Ce & Dcgi Approved , Abluminally Coated Sirolimus Eluting Thin Struts Microporus Chromium Cobalt Stent With Bio Absorbable-Polymer Matrix, Where Balloon Is Also Coated With Sirolimusus Fda / Ce & Dcgi Approved , Abluminally Coated Sirolimus Eluting Thin Struts Microporus Stain Less Steel Stent With Bio Absorbable-Polymer Matrix, Where Balloon Is Also Coated With Sirolimusus Fda / Ce & Dcgi Approved , Sirolimus Eluting Stent Cobalt Chromium With Diameter Of 2Mm To 4.5Mm With Length Of 8Mm To 48Mm With Biogradable Polymer.Us Fda / Ce & Dcgi Approved , Biolimus Eluting Stent - Us Fda / Ce & Dcgi Approved , Tacrolimus Eluting Stent - Us Fda / Ce & Dcgi Approved , Drug Eluting Biodegradable Polymer & Shellac Resign Top Coatus Fda / Ce & Dcgi Approved , Everolimus Eluting Chromium Cobalt Multi Link Drug Eluting Stent -Us Fda / Ce & Dcgi Approved , Everolimus Eluting Chromium Cobalt Multi Link 48Mm Drug Eluting Stent -Us Fda / Ce & Dcgi Approved , Everolimus Eluting Platinum Chromium Stent Bio Absorvbale Polymer Stentus Fda / Ce & Dcgi Approved , Sirolimus Eluting Stent Cobalt Chromiumwith 2 Links & 8 Crownswith Diameter Of 2Mm To 4.5Mm With Length Of 8Mm To 38Mm With Biogradable Polymer And Gradient Coating.Us Fda / Ce & Dcgi Approved , Biodegradable Polymer / Microporous Surface / Sirolimus Drug & Shellac Resign / Abluminal Coating / Temperature Control Device-Tag Alertus Fda / Ce & Dcgi Approved , Dual Drug Polymer Free Stent / Plat Form-Cobalt Cromium / Probucol Drug Instead Of Polymer / Microporous Surface / Abluminal Coating / Shellac Resin / Strut Thickness 79Micron , Sirolimus Coated Drug Stent On Cobalt Chromium - Ce / Us Fda And Dcgi Approved , Silicon Carbide And Sirolimus Drug Eluting Stent – Ce / Us Fda And Dcgi Approved , C.P. Stent Covered , C.P. Stent Uncovered , Drug Eluting Platinum Chromium Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Available In The Sizes And Lengths , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - ( L-605 Co-Cr Alloy ) ( Should Not Have Drug & Polymer Coating On Joints & Bends ) . 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl ( Poly Lactic Acid + Poly Capro Lactone Pcl ) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus ( 0.8Ug / Mmsq ) . •Minimum Tip Entry Profile Of 0.42Mm •Pmda+Ce Approved , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - ( L-605 Co-Cr Alloy ) ( Should Not Have Drug & Polymer Coating On Joints & Bends ) . 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl ( Poly Lactic Acid + Poly Capro Lactone Pcl ) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus ( 0.8Ug / Mmsq ) . •Minimum Tip Entry Profile Of 0.42Mm Should Have Gradiant Coating •Pmda+Ce Approved , Polymer Free Evrolimus Eluting Stent Coronary Stent Withco-Cr Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withdiameters Of 2.0 Mm To 4.0 Mm Of Varying Length. Entry Profile 0.016 , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Stainless- Steel Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withdiameters Of 2.0 Mm To 4.0 Mm Of Varying Length. , Polymer Free Sirolimus Eluting Coronary Stent With Co-Cr Platform Having Microporous Surface, Abluminal Coating And Shellac Resin Withdiameters Of 2.0 Mm To 4.0 Mm Of Varying Length. Entry Profile 0.016 , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Co-Cr Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withstrut Thickness 68?M ( Sv ) , 79?M ( Mv ) . , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Stainless- Steel Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin With Temperature Control Device - Tag Alert , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Co-Cr Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withs Strut Thickness 68?M ( Sv ) , 79?M ( Mv ) . , New Generation Des Providing Synergywith Biodegradable Polymer With Microporous Surface. Sirolimus Drug And Cobalt Chromium Surface. , Sirolimus Eluting Stent With Biodegradable Polymer. Distal 3 Mm Tip Should Be Hydrophilic Coated. Strut Thickness Should Be 60Microns. , Everolimus Eluting Stent With Biodegradable Polymer. Distal 3 Mm Tip Should Be Hydrophilic Coated. Strut Thickness Should Be 60Microns , Balloon Expandable Pulmonary Artery Stents – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Available In Various Sizes , Ivc Stents Self Expendable - Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Available In Various Sizes , Everolimus Eluting Chromium Cobalt Multi Link Platform Drug Eluting Stent With True Center Tip For Peak Performance In Complex Leasions -Us Fda / Ce & Dcgi Approved , Sirolimus Bioresorbable Vascular Scaffold Stent Systemus Fda / Ce & Dcgi Approved , Ultrathin Strut 50 Micron Cobalt Chromium Everlimus Eluting Coronary Stents , Group D: Consumable For Peripheral Stenting , Distal Embolic Protection Device - Carotid / Svg • ( One Size For All Carotids ) • Eccentric Filter With Nitinol Loop For360 Degree Wall Apposition • Rx .014 6F Sheath Compatible • 190 Cm Extra Supportwire • Uniform Micro Pore Size Of 110 Micron Pore Size With 1Mm Pore Free Zone • Non-Thrombogenic Nylon Membrane With Hydrophilic Coating • Should Allow Optimal Filtration In Vessels 3– 5.5 Mm Size •Usfda Approved , Balloon Expandable Stent - Renal • Should Be Low Profile, 6F Guide And 0.018 Wire Compatible, Monorail System • Should Have High Consistent Radial Strength, High Flexibility, Enhanced Radiopacity • Should Have Architecture Which Offers Excellent Lumen Coverage And Conformability • Should Have Increased Support And Radial Strength At Proximal End For Ostial Lesion • Stent Should Be Premounted On Semi Compliant Balloon Catheter • Stent Dia 4-7Mm, Length 15 & 19, Cathter Length 90 & 150 Cm. • Should Have Crimping Technology Which Ensures No Stent Slippage From Balloon , Balloon Expandable Stent - Large Diameter • Should Have High Consistent Radial Strength, High Flexibility, Enhanced Radiopacity • Should Have Architecture Which Offers Excellent Lumen Coverage And Conformability • Should Have Low Foreshortening, Low Recoil. • Stent Should Be Premounted On Non Compliant Balloon Catheter To Avoid Dogboning And Proper Scafolding • Should Have Dual Lumen Catheter Design For Faster Deflation • Stent Dia 5-10Mm, Length 27, 37, 57, Cathter Length 135 Cm. • Should Have Crimping Technology Which Ensures No Stent Slippage From Balloon , Self Expanding Stent For Carotid Artery Stenting • Self Expandingelgilloy Stent With Closed Cell Design • Monorail, 0.014 Wire & 6F Sheath Compatible • Reconstrainable Braided Stent • Shaft Length 135Cm • Dia : 6-9 Mm , Peripheral Self Expandable Stent • Should Be Laser Cut Self Expandingnitinol Stent With Proximal And Distal Markers • Should Have Hybrid Cell Design Which Promotes A Balance Of Radial Strength And Flexibility • Stent Struts To Be Electropolished To Avoid Micro Fracture Through Micro Cracks On The Stent Struts • Should Have Controlled Release / Deployment Mechanism To Ensure Precise Placement And Low Foreshortening • Dia 6 - 14 Mm , Length -20, 40, 60 , 80 , 100 , 120 • Should Be 6F Sheath And 0.035 Wire Compatible Across Sent Size Matrix , Peripheral Self Expanding Drug Eluting Stent • Paclitaxel Eluting Self-Expanding Stent With A Polymer That Releases Paclitaxel Over 12 Months With Lowest Dose Density Of 0.167 ?G / Mm2 For Sfa And Ppa. • Triaxial Delivery System • Hybridcell Architecture With Open & Close Celldesisn • Easy Deployment With Thumbwheel & Pull Grip • 6F Sheath Compatibility • Dia - 6 & 7 Mm • Length -40, 60, 80 , 100, 120 Mm • Us Fda Approved • Laser Cut Nitinol Stentdedicatedly Designedfor Sfa & Popliteal • Trixial Delivery System , Hybrid Cell Architecture, • 6F Sheath Compatibility • Dia5, 6, 7 , 8 Mm , Length -40, 60, 80, 100, 120Mm , 150 Mm • Easy Deployment With Thumbwheel & Pull Grip , Inflation Device To Have High Presure Range Upto 26 Atm To Have High Pressure Stopcock Preventing Leakage During High Pressure Inflation 20Cc Volume Holding , Balloons - Nc Workhorse ( 0.035 Wire ) Should Be Non-Compliant / Semi Compliant. Rbp Of 20 - 24 Atm ( 3-8Mm Balloon ) , 14-18 Atm ( 9-12Mm Balloon ) , Should Have High Rated Burst Pressure With Scratch / Puncture Resistant Nybax Material Dual Lumen Shaft With Balloon Laser Bonded And Short Atraumatic Tapered Tip Should Have Lubricious Medi-Glide Coating On Balloon Material Should Have Good Re-Wrap And Low Tip Profile Should Be 5F ( 3-7Mm Balloon ) / 6F ( 8-10Mm Balloon ) / 7F ( 12Mm Balloon ) Sheath And 0.035 Wire Compatible Should Have Min Lesion Entry Profile Of 0.040 ( 1.016Mm ) Should Have Choice Of Long Balloon Lengths 20Mm To 200Mm , Carotid / Renal Angioplasty Balloon • Rx 018 Carotid / Renal Balloon • 018 Guide Wire Compatible • 4F Sheath Compatible To 4 To 7 Mm Diameter With 20Mm Length • Usable Catheter Length 135Cm For All Sizes . • Usfda Approved , Paclitaxel Coated Drug Eluting Balloon For Btk Paclitaxel Coating Should Be 2Ug / Mm2 Should Have Citrus Ester Exipentwith Hydrophobic Coating For Mininising Drug Loss Must Be Compatible With 0.018 -Inch Wire Loading Tool Should Be Avialbale Must Be Compatible With 4 Fr Sheath Balloon Length Should Be 20Mm – 200Mm Dia -2-4 Mm , Paclitaxel Coated Drug Eluting Balloon For Iliac & Sfa Paclitaxel Coating Should Be 2Ug / Mm2 Should Have Citrus Ester Exipentwith Hydrophobic Coating For Mininising Drug Loss Must Be Compatible With 0.018 -Inch Wire Loading Tool Should Be Avialbale Must Be Compatible With 4 Fr Sheath Balloon Length Should Be 20Mm – 200Mm Dia -4-7 Mm , Balloons - 0.018 / 0.014 Wire Compatible Should Be 4F / 5F Sheath And 0.018 / 0.014 Wire Compatible With Choice Of Otw / Monorail Delivery System Should Be Non-Compliant / Semi Compliant Should Have High Rated Burst Pressure With Scratch / Puncture Resistant Pebax Material Should Have Lowest Tip Entry Profile Of Not More Than 0.022 And Good 5 Fold Re-Wrap Design Should Have Bioslide Hydrophilic Coating On Balloon Material Should Have Large Working Range Should Have Excellent Coulum Support With Balloon Laser Bonded And Short Atraumatic Tapered Tip Should Have Full Length Tapered Core Wire For Enhancdpushability And Kink Resistance Should Have Balloon Lengths Starting From 20 Mm- 150 Mm And Balloon Diameter From 3Mm To 10Mm , Balloon - 0.014 Wire Compatible For Btk Procedure With An Ultra-Low Lesion Entry Profile ( 0.017” / 0.43 Mm ) And Best-In-Class Crossing Profile ( 0.030” / 0.76 Mm ) With Deflation Times Of Less Than 10 Seconds*** And Balloon Lengths Up To 220 Mm Balloon Dia From 1.5 Mm To 4Mm With 4 F Sheath Compatibility Across Sizes. Monorail / Over The Wire. , Balloons - Large Diameter For Vessel Diameters Of 12Mm And Above Should Be Non-Compliant And Have Low Deflation Time Balloon Material Should Be Lubriciously Coated With Scratch / Puncture Resistant Balloon Material Min. Sheath Compatibility Of 7F. , Peripheral Cutting Balloon Should Have Choice Of Diameter Range From 5Mm To 8Mm Should Have Micro Surgical Blades ( Atherotome ) On Non Compliant Balloon Only Bigger Diameter Cutting Balloons ( 5 - 8Mm ) With 2Cm Atherotome Should Be 0.018 Wire Compatible With Otw Delivery System Exposed Atherotome Height To Be Not More Than 0.005 , Occlusion Balloon Should Be Soft Compliant Balloon Material With Radiopaque Markers At Both Distal And Proximal End Of Balloon Should Be 14F / 16F Sheath And 0.035 / 0.038 Wire Compatible With Balloon Diameter Of 20Mm, 27Mm, 33Mm And 40 Mm , Guidewires - 0.018 / 0.014 Should Have Glidex Hydrophilic Distal Coating For Negotiating Tortous Anatomy And Colateral Approach. Should Be Available In Both 0.018 And 0.014. Should Provide Excellent Support Like A 0.035 In A 0.018 / 0.014 Wire Single Piece Core Design To Have Better Steerability, Pushability And Torque Transmission , Amplatz Super Stiff Wires - 0.035, 0.038 Should Have Stiff Core, Super Stiff Wire Body, Atraumatic Tip With Gradual Distal Core Taper Should Have Ptfe / Teflon Coating For Reduced Friction During Catheter Tracking. Should Support Catheter Exchange Should Have Flat Coiled Outer Wire Construction For Larger Inner Core And Hence Greater Support , Hydrophilic Marker Wire - 0.035 Should Have Single Piece Core With Radiopaque Polyurethane Jacket And Glidex Coated Hydrophilic Coating 4 Distal Paltinum Magic Markers Spaced At 1Cm For Improved Visualization Single Piece Core Design To Have Better Steerability, Pushability And Torque Transmission , Cto Wire 0.014 0.014 Weighted Tip Cto Guide Wire With Stainless Steel Core Hydrophilic & Hydrophobic Coating Tip Load-12Gm , 18 Gm , 25 Gm , 30 Gm Us Fda Approved Wire Lengths - 190 Cm & 300Cm , Cto Wire 0.018 0.018 Weighted Tip Cto Guide Wire With Stainless Steel Core Hydrophilic & Hydrophobic Coating Tip Load-12Gm , 18 Gm , 25 Gm , 30 Gm Us Fda Approved Wire Lengths - 190 Cm & 300Cm , 0.014 Peripheral Wire Stainless Steel Core Wire Hydrophilic & Hydrophobic Coating Tip Load-3Gm & 6 Gm Us Fda Approved Wire Lengths - 190 Cm & 300Cm , 0.018 Peripheral Wire 0.018 Guide Wire With Stainless Steel Core Hydrophilic & Hydrophobic Coating Tip Load- 7.6 Gm , 6.5 Gm Us Fda Approved Wire Lengths -150 Cm , 200 Cm & 300Cm , Backup Meir Wire - 0.035 • Should Have Extra Stiff Shaft To Support Aaa Device • Should Have Very Flexible And Soft Distal Tip To Avoid Aortic Perforation / Vessel Trauma • Should Have Radiopaque Tip For Excellent Visibility, Ptfe Coated Proximal Shaft For Frictionless Advancement • Sholud Have Choice Of J And C Tip Shape With 185Cm And 260 / 300Cm , Guide Catheters - 6F, 7F, 8F Choice Of 16 Tip Shapes Amongst Indusry Standard Shapes In 55Cm And 90Cm Should Have Excellent Backup Support And Shape Retention Tungsten Atraumatic, Radiopaque Soft Tip Should Have Round Double Wire Braided Construction For Better Torque, Large Inner Lumen With Soft Tapered Tip Ptfe Inner Liner ( For Smooth Passage Of Devices ) And Polyether-Ester Polymer Outer Coating ( For Shape Retention ) , Support Catheter Catheter For Crossing Chronic Total Occlusions In Peripheral Arteries- Fda / Ce Mark Approved Various Sizes , 0.014 , 0.018, 0.035 , Micro Punture Set Accustick Ii Introducer ( 4F Coaxial Dilator / 6F Sheath With Ro ) With Locking Stiffening Cannula Anddiagnosticneedle With Stylet 21G + 0.038 J -Tip And 0.018 Nitinol Wire , Detachable Coil 0.018 Interlock Detachable Platinum Fibered Coil For Peripheral Use , 0.018 Assorted Sizes .Dia 3Mm -14 Mm . Assorted Lengths , Detachable Coil 0.035 Interlock Detachable Platinum Fibered Coil For Peripheral Use , 0.035 Assorted Sizes Dia 3Mm- 20 Mm, Assorted Lengths , Pushablevortx 18 Coil Pushable 0.018 System Platinum Vortx Coils 3 To 6 Mm In Diameter Of Assorted Length , Pushable18 Coil Pushable Platinum 0.018 System Coils, 3-6 Mm Diameter Of Assorted Lenghts , Pushablevortx 35 Coil Pushable Platinum Vortx0.035 System Coils Upto 3 To 9 Mm In Diameter Of Assorted Lenghts , Pushable35 Coil Pushable Platinum 0.035 System Coils Upto 3 To 9 Mm In Diameter Of Assorted Lenghts , Pva Particle Polyvinyl Alcohol Particles 350-500 Microns , Pva Particle Polyvinyl Alcohol Particles 500-700 Microns , Pva Particle Polyvinyl Alcohol Particles 150-250 Microns , Pva Particle Polyvinyl Alcohol Particles 45-150 Microns , Drug Eluting Beads D C Bead - Loadable Hydrogel Microspheres That Are Biocompatible, Hydrophilic, Non-Resorbable, And Precisely Calibrated And Approved For Loading With Doxorubicin And Irinotecan, Available In Size Range Of 70Um - 700Um. , Torquable Pre Shaped Superselectivemicrocatheter Torquablemicrocatheter For Peripheral Embolization, Made Of Nitinolhypotube And Hydrophilictip. Id 0.021 With Different Shapes. ( Bern, J, Swan & Strait ) , Microcatheter For Peripheral Embolization Stainless Steel Braided Microcatheter With Hydrophilic Coating For Peripheral Coil Embolization. Id 0.021 Manually Shapeable Tip , Hi-Flow Microcatheter For Peripheral Embolization Fiber Braided High Flow Microcatheter Od 2.8Fr / Id 0.027 Permiting 710 Micron Pva Particle & 5520 Kpi Burst Pressure. Dmso & Alcohol Compatible , Torquablesuperselectivemicrocatheter With Guidewire Torquablemicrocathetermede Of Nitinolhypotube With Hydrophilic Shapable Tip. Id 0.021 With 0.014 Manually Shapable&Reshapable Tip Wire Guide For Superselective Peripheral Embolization , Hi-Flow Microcatheter For Peripheral Embolization With Guide Wire Fiber Braided High Flow Microcatheter Od 2.8Fr / Id 0.027 Permiting 710 Micron Pva Particle & 5520 Kpi Burst Pressure With Hydrophilic Shapable Tip. Id 0.021 With 0.016 High Torque Control Dimond Cut Nitinolhypotube, Shapable Tip Micro Wire. Dmso & Alcohol Compatible , Peripheral Imaging Ivus Catheter 0.018 Peripheral Imaging Catheter ( Ivus ) With 30 Mhz Frequency To Image Large Peripheral Vessels , Pharmaco Mechanical Thrombolysisdevice / Catheter Pharmaco Mechanical Thrombolysisdevice / Catheterwith Active Infusion Ofthromblytic Agentand Aspiration Suctionin Same Catheter .Dia -4F , 6F , 8F , Power Pulse Kit Angiojet Ultra Power Pulse Kit , Group E: Items For Bmv Procedure And Pulmonary Valve Dilation , Brocken Brough Needle ( Transeptal ) , L.A. Wire, Stylet, Ruler, Syringe, Streching Tube ( Balloon Kit ) , Baloon Size 20-30 Mm Innoue , Baloon Size 20-30 Mmaccura , Baloon Size 20-30 Mm Sym / Equivalent , Mullen Sheath , Baloon Shaper , Septal Dilator , Exchange Length Terumo Wire , Tyshak Balloon ( 9-12 ) , Tyshak Balloon Compatible Extra Stiff Wire ( 021 & 025 ) , Valver Balloon , Balloon ( Innoue ) With Accessories ( Brocken Brough Needle ( Transeptal ) , L.A. Wire, Stylet, Ruler, Syringe, Streching Tube ( Balloon Kit ) , Mullen Sheath, Baloon Shaper, Septal Dilator, Exchange Length Terumo Wire ) , Balloon ( Accura With Accessories ) ( Brocken Brough Needle ( Transeptal ) , L.A. Wire, Stylet, Ruler, Syringe, Streching Tube ( Balloon Kit ) , Mullen Sheath, Baloon Shaper, Septal Dilator, Exchange Length Terumo Wire ) , Balloon For Pulmonary Valve Dilation , Group F , ( A ) Asd Closure Devices With Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( 6 Mm – 40 Mm ) ( B ) Titanium Nitride Coated Asd Closure Device With Delivery System -Approved For Pediatric / Adult Use -Device Made Up Of Biologically Inert Material -Available In All Sizes ( 06Mm To 42Mm ) -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. -Should Come With Compatible Delivery System , Asd Closure Devices Without Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( 6 Mm – 40 Mm ) , Delivery Sheath For Asd Closure Device – Us Fda / Ce & Dcgi Approved • Compatible With The Device Approved In Item No. 1, 2 , ( A ) Left Atrial Appensage Closure Device Us Fda / Ce & Dcgi Approved ( B ) • Titanium Nitride Coated Left Atrial Apendage Closure Device: • Us Fda / Ce & Dcgi Approved • -Should Be Able To Close Single Lobed And Multiple Lobed Appendages. • -Low Profile • -Should Be Compatible To All The Laa Anatomy • Titanium Nitride Coated Vsd Closure Device With Delivery System • -Approved For Pediatric / Adult Use • -Device Made Up Of Biologically Inert Material • -Available In All Sizes ( 06Mm To 24Mm ) • -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. ( C ) -Should Come With Compatible Delivery System , Sizing Balloon For Device Closure – Circular Shape Us Fda / Ce & Dcgi Approved , Sizing Balloon For Device Closure – Oval Shaped - Us Fda / Ce & Dcgi Approved , Sizing Plate For Device Closure- Us Fda / Ce & Dcgi Approved , Delivery Cable For Asd / Vsd / Pda Devices - Us Fda / Ce & Dcgi Approved , Retrievers For Asd / Vsd / Pda Devices - Us Fda / Ce & Dcgi Approved , Seath For Retrival Of Devices - Us Fda / Ce & Dcgi Approved , ( A ) Vsd Closure Devices With Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( 6 Mm – 40 Mm ) ( B ) Titanium Nitride Coated Vsd Closure Device With Delivery System -Approved For Pediatric / Adult Use -Device Made Up Of Biologically Inert Material -Available In All Sizes ( 06Mm To 24Mm ) -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. -Should Come With Compatible Delivery System , ( A ) Pda Closure Devices With Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( B ) Titanium Nitride Coated Pda Closure Device With Delivery System -Approved For Pediatric / Adult Use -Device Made Up Of Biologically Inert Material -Available In All Sizes ( 03-05Mm To 20-22Mm ) -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. -Should Come With Compatible Delivery System , Pda Closure Devices Without Delivery System – Us Fda / Ce & Dcgi Approved , Embolisation Coils ( 0.018 Inch ) - Us Fda / Ce & Dcgi Approved • Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils ( 0.035 Inch ) - Us Fda / Ce & Dcgi Approved • Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils ( 0.052 Inch ) - Us Fda / Ce & Dcgi Approved • Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Plugs And Foam , Introducer System For Laa Closure With The Double Angulation Of 45° & 30° Containing I ) Delivery Sheath With Back Bleed Prevention Hemostatic Valve And Side Port, Ii ) Dilator, Iii ) Delivery Cable, Iv ) Loader. 8 / 9 / 10Fr. , Multifunctional Occluder -For Occlusion Of Muscular Vsd, Perimembranous Vsd, Rsov, Apex Window & Av Fistula - Should Be Low Profile ( 4F-6F ) -Should Come With Aelongatable Waist And Can Be Used In Retrograde And Antegrade Approach. , Self-Expandablenitinol Stent With Radial Force Fixation, E Ptfe Dual Membrane Coating For ( Excellent Biocompatibility And Durability Andno Suture On The Main Body To Prevent Pin Hole Leakage ) . Spine – Connecting Bar – ( Gives Axial Support , - Avoids Shortening ) . Size Od - 20Mm To 44Mm; Length - 80Mm, 100Mm, 120Mm, 140Mm 160Mm And 200Mm. Tapering - 4 / 6 / 8Mm , Specifically Designed For Endovascular To Exclusion Abdominal Aortic Aneurysm. A Self-Expandable Nitinol Stent With Eptfe Dual Membrane Coating. No Suture On The Main Body To Prevent Pin Hole Leakage. Od - 22Mm To 34Mm, Length - 120Mm Main Body , Iliac Stent Graft Endovascular Stent Graft Device For The Treatment Iliac Aneurysm Or Dissection. With Proximal Bare Spring Configuration. It Should Be An Extension To Aaa Graft System. Od - 10Mm To 18Mm Length - 60Mm To 120Mm , Peripheral Snare With Tungesten Loop Coated With Titanium Nitride ( 5Mm To 35Mm ) Having A Nitinol Shaft With The Length Of 120Cm. Type - Goose Neck. , Coronary Snare Withtungsten Loop Coated With Titanium Nitride ( 4Mm & 7Mm ) Having Nitinol Shaft With The Length Of 200Cm. Type - Goose Neck , Steerable Sheath With Deflectable Tip ( 90-180 Degree ) Size Available Upto - 5 / 6 / 7 / 8 / 9 / 10 / 12 / 14Fr. In 80Cm 90Cm Length , Aui Stent Graft System Specifically Designed For Treatment Of Endovascular Abdominal Aortic Aneurysm. A Self-Expandable Nitinol Stent With Eptfe Dual Membrane Coating With Connecting Spine Bar For Flexibility & Offers Axial Supportpreventing Foreshortening Of Stent. , Group G: Miscellaneous Item , Intravascular Retriever – Snare ( ‘Amplatz Gooseneck’ Type ) - Us Fda / Ce & Dcgi Approved Snare Kit Should Include • A Snare And Its Compatible Sheath • Should Have Nitinol Shaft • Should Have 90 Degree Preformed Snare Loop • Variable Sizes Of Loop ( 5-35 Mm ) , Sheaths For Intravascular Snares - Us Fda / Ce & Dcgi Approved , Vertebral Catheter - Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves , Coeliac Axis Catheter - Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves / Cobra Catheter , Shepherd’S Hook Catheter- Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves , Microcatheter ( Coiled Stainless Steel Construction ) - Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves • 2-3.8 F Size • .010-.022 Inch Wire Compatible • With Radio-Opaque Marker At Tip , High Pressure Angioplasty Balloon For Peripheral Vascular Use – Us Fda / Ce & Dcgi Approved • Should Have Rated Burst Pressure = 14 Atmosphere • Should Have Hydrophilic Coating • Should Be Available In Various Outer Diameters And Balloon Lengths And Various Shaft Lengths , Peripheral Stent Balloon Expandable ( Otw / Rx ) – Us Fda / Ce & Dcgi Approved • Should Be 0.035” Compatible • Should Be Made Of Cobalt Chromium • Should Be Quoted Either In Open Cell Or Closed Cell Design • Should Be Available In Various Balloon Ods • Should Have Balloon / Stent Lengths Available • Should Have A Shaft Lengths Of 75-135 Cm , Self-Expanding Peripheral Stent – Us Fda / Ce & Dcgi Approved • Should Be 0.014 / 0.018” Compatible • Should Over The Wire • Should Be Made Of Nitinol • Should Have The Least Lesion Crossing Profile For All Stent Diameters • Should Be Available In Various Stent Diameters Of 6-10 Mm • Should Be Available In Various Stent Lengths > 60 Mm • Should Have A Shaft Lengths Of At Least 110 Cm , Ivc Filter – Us Fda / Ce & Dcgi Approved , Ivus Catheter Compatible With System In Cath Lab Of Pbm Hospital Bikaner ( Boston Scientific ) , Ffr Catheter Compatible With St. Jude System , Rota Burr ( All Size ) , Rota Wire , Rotapro Pre Connected Exchangable Burr Catheter ( Rota Advancer And Burr ) - Us Fda Approved ( Compatible With Rotapro Machine ) . , Ivl Cathetar , Iabp Cathetar And Accessories , Bib ( Balloon In Balloon ) Type Balloons For Coarctation Dilatation-Us Fda& Ce And Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Balloons Available In The Sizes And Lengths , Z Med Type Balloon For Aortic Coactation – Us Fda / Ce And Dcgi Approved • 5 To 20 Cm Diameter In All Sizes Otw / Rapid Exchange, Compatible With 0.014” / 0.035” And 0.038” Wire , ( A ) Impella Hemodynamic Support Catheter2.5 ( B ) Impella Hemodynamic Support Catheter5 ( C ) Impella Hemodynamic Support Cathetercp ( D ) Impella Hemodynamic Support Catheterrp , Acist Ivus Catheter • With Dual Frequency 40 / 60 Mhz In Single Catheter • Single Catheter For Both Coronary And Peripheral • Lubricious Hydrophilic Coating Supports Faster Pullback Speed Up To 10 Mm / Sec For Minimizing Ischemic Risk • With Novel Offset To Design, Variflex Imaging Window. , Savvy Sensor Guided Tavi Wire Single Wire Working As A Guide Wire, For Hemodynamic Measurement And For Rapid Lv Pacing , Optowire A Hybrid Nitinol / Stainless Steel Pressure Sensing Guided Wire Powered By Fidela • Patented Optical Pressure Sensor Mounted Proximal To 3 Cm Long Radioopaque • Measure Physiologic Indices Including •Ffr & Diastolic Pressure Radio ( Dpr ) • Wire With Diameter Of .014 And Length Of 180 Cm • Operating Pressure Of -30 To + 300 Mmhg , Consumables For Tavi ( A ) Balloon Expandable With All Required Accessories ( B ) Self Expandable With All Required Assessories , Fine Cross Micro Catheter ( Braided & Coil Construction Must Have Along With Distal Hydrophilic Coating ) To Be Used For Cto Antegrade And Retrograde Approach , Guide Extansion Catheter Us Fda Approved , Group H: Pace Maker , Vvirpacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , Vvirpacemaker Us Fda / Ce & Dcgi Approved Digital Multi-Programmable Pacemaker.Mode: Single Chamber: Vvir / Aair. With Beat To Beat Auto Capture And Proven Longevity Of >9.5 Years With 100% Pacing Of Ra / Rv @2.5Volts. Digital High Sampling Rate Of P / R Wave And Automated Ventricular Rate Stabilization During Af. With 6F Compatible Passive-Fixation Tined Lead Or Screw In Lead & Lead Introducer & Dual Rate Responsive Sensors With Life Time Warranty. Mri Compatible 3 Tesla , Vdd / Vddr Pacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Digital Multi-Programmable Pacemaker Mode: Dual Chamber: Dddr. With Features Of Automatic Threshold Check, Auto Adjusting Of Av Delay ( Extendable Upto 400 Ms ) , And Automatic Intrinsic Activity Search. With Beat To Beat Auto Capture And Proven Longevity Of >10 Years With 100% Pacing Of Ra & Rv At 2.5 Volts. With 6F Compatible Passive-Fixation Tined Leads Or Screw In Leads & Lead Introducers & Dual Rate Responsive Sensors With Life Time Warranty. Mri Compatible 3 Tesla , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers For Physiological Pacing ( His Bundle And Left Bundle Pacing ) With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , ( A ) Physiological Pacing Lead ( His Bundle And Left Bundle Pacing ) & All Accessories 3Tmri Compitableus Fda / Ce & Dcgi Approved ( B ) Lumenless Lead Fda Approved Lead For His Bundle Pacing And Lbbap , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Digital Multi-Programmable Pacemaker Mode: Dual Chamber: Dddr. With Features Of Automatic Threshold Check, Auto Adjusting Of Av Delay ( Extendable Upto 400 Ms ) , And Automatic Intrinsic Activity Search. With Beat To Beat Auto Capture, With 6F Compatible Passive-Fixation Tined Leads Or Screw In Leads & Lead Introducers & Dual Rate Responsive Sensors With Life Time Warranty. Mri Compatible 3 Tesla , Aicd Single Chamber Pacemaker With All Leads Us Fda / Ce & Dcgi Approved, Icd With All Leads And All Accessories • Single Chamber • All Basic Programmable Parameters • Must Be Mr Conditional. • Must Have Facility Of Atp Befor Charging For Defibrillation • All Basic Programmable Parameters With Shock Reduction Technology Comprising Of Svt, T-Wave, Rv-Noise Discrimination Features. • Must Have Facility Of Rf / Distance Telemetry Programming • Rv Lead Must Be 9F Of Less In Size And Have Proven Performance Of 5 Years. • Lead Should Be Steroid Eluting And Df-1 & Df-4 Compatible • Mri Compatible 3 Tesla • Warranty Shoud Not Be Less Than 10 Years , Aicd Dual Chamber Pacemaker With All Leads Us Fda / Ce & Dcgi Approved, Icd With All Leads And All Accessories • Dual Chamber • All Basic Programmable Parameters • Must Be Mr Conditional • Must Have Acility Of Atp Befor Charging For Defibrillation • All Basic Programmable Parameters With Shock Reduction Technology Comprising Of Svt, T-Wave, Rv-Noise Discrimination Features. • Must Have Facility Of Rf / Distance Telemetry Programming • Rv Lead Most Be 9F Or Less In Size And Have Proven Performance Of 5 Years • Must Have Algorithm Of Automatic Conversion From Aair To Dddr And Vice Versa ( For Minimize Ventricular Pacing ) • Must Have Algorithm For Management Of Neuro Cardiogenic Syncope • Must Have Automatic Threshold Management For Patient Safety. • Mri Compatible 3 Tesla • Warranty Shoud Not Be Less Than 8 Years , Biventricular Pacemaker With All Accessories And Leads Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker With Atrial, Rv, Lv Leads And All Accessories Required During Imlantation • Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay • Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays • Must Have Quadripolar Lead For Lv Pacing • Must Have Fluid Monitoring System • Must Have Facility For Active Fixation Of Lv Lead In C S ( Either Screwing Ordeployable Lobes With Anchor Mechanism ) • Must Have Mri Compatible • Company Must Quote Only The Latest Model Of Devices Commercially Available • Mri Compatible 3 Tesla , Combo Device ( Crt-D ) With Quadripolar Lv Lead And Df-1 Rv Lead Must Be 3T Full Body Mri Conditional Must Have Atleast 17 Pacing Vectors In Lv Lead Must Have Rate Responsive Feature With Mv Sensor Must Have Battery Capacity Of More Than 1.8 Ampere Hour Warranty Of Atleast 6 ( 4+2 ) Years , Biventricular Pacemaker + Icd With All Leads Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker + Icd ( Combo Device ) With Atrial, Rv, Lv Leads And All Accessories Required During Imlantation • Must Have All Basic Programmable Parameters • Must Have Quadripolar Lead For Lv Pacing • Facility Of Atp During Charging For Defibrillation • Must Have Fluid Monitoring System • Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay. • Must Have Algorithm For Af Suppression With Programmable Automatic Mode Switch Basal Rate. • Must Have Facility For Automatic Lv Only And B / V Pacing And Automatic Av, Vv Delay • The Size Of Atrial And Rv Lead Must Be Df-4 Compatible And Lv Lead Quadripolar • Must Have Mri Compatible • Company Must Quote Only The Latest Model Of Devices Commercially Available. • Mri Compatible 3 Tesla , Remote Monitoring Device With International Roaming • Must Have Automatic Hands Free Transmission For Patients • Must Have Physician Friendly Colour Coded Urgency Settings • Must Be Compatible With Standard Internet Settings • Interrogation Capabilities Should Be Compatible With In Office Follow Up • Alert Notification Should Be Available As Text Messages On Mobile • Direct Presence Of Parent Company In India ( Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept • Company Must Quote Only The Latest Model Of Devices Commercially Available , Implantable Loop Recorder • Must Be Able To Detect Asytole, Brady-Arrhythmia And Vt / Fvt • Must Have The Storage Capacity Of >45 Minutes • Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion • Must Have A Patient Tool For Symptomatic Recording • Must Have At Least 35 Months Of Longevity • Must Be Compatible With Remote Monitoring Device • Direct Presence Of Parent Company In India ( Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept • Company Must Quote Only The Latest Model Of Devices Commercially Available , Implantable Loop Recorder For Af Detection • Must Be Able To Detect Asystole, Brady-Arrhythmia And Vt / Fvt And At / Af • Must Have The Storage Capacity Of >45 Minutes • Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion • Must Have A Patient Tool For Symptomatic Recording Along With Alerts • Must Be Able To Give Af Burden Reports To Monitor The Progress Of Chronic Af Patients • Must Have At Least 35 Months Of Longevity • Must Be Compatible With Remote Monitoring Device • Direct Presence Of Parent Company In India ( Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept • Company Must Quote Only The Latest Model Of Devices Commercially Available , Mobile Cardiac Telementry System For Arrhythmia Diagnosis • Must Have 7 Days Rhythm Monitoring With Active Life • Must Collect Ecgs Automatically For • Bradycardia And Tachycardia • Pause / Asystole • Atrial Fibrillation • Vt / Vf , Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker + Icd ( Combo Device ) Without Lead , Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker ( Crt ) Without Lead , Us Fda / Ce & Dcgi Approved, Aicd Dual Chamber Pacemaker Without Lead , Us Fda / Ce & Dcgi Approved, Aicd Single Chamber Pacemaker Without Lead , Us Fda / Ce & Dcgi Approved Dddr Permanent Pacemakers Without Lead , Us Fda / Ce & Dcgi Approved Vdd / Vddr Permanent Pacemakers Without Leads , Us Fda / Ce & Dcgi Approved Ddd Permanent Pacemakers Without Lead , Us Fda / Ce & Dcgi Approvedvvi Permanent Pacemakers Without Lead , Us Fda / Ce & Dcgi Approved Vvir Permanent Pacemakers Without Leads , Atrial Lead&All Accessories For Biventricular Pacemaker ( Crt ) , Us Fda / Ce & Dcgi Approved , Rv Leadall &Accessories For Biventricular Pacemaker ( Crt ) , Us Fda / Ce & Dcgi Approved , Lv Leadall &Accessories For Biventricular Pacemaker ( Crt ) , Us Fda / Ce & Dcgi Approved , Atrial Leadfor Biventricular Pacemaker + Icd ( Combo Device ) With All Accessories Required During Imlantation Us Fda / Ce & Dcgi Approved , Rv Leadfor Biventricular Pacemaker + Icd ( Combo Device ) With All Accessories Required During Imlantation Us Fda / Ce & Dcgi Approved , Lv Leadfor Biventricular Pacemaker + Icd ( Combo Device ) With All Accessories Required During Imlantation Us Fda / Ce & Dcgi Approved , Rv Lead For Aicd Single Chamber, Us Fda / Ce & Dcgi Approved , Pacing Leads For Aicd Dual Chamber, Us Fda / Ce & Dcgi Approved , Atrial Leadpacing Lead For Dddr Permanent Pacemakers Us Fda / Ce & Dcgi Approved , Ventricular Leadpacing Lead For Dddr Permanent Pacemakers Us Fda / Ce & Dcgi Approved , Atrial Leadpacing Lead For Dddpermanent Pacemakers Us Fda / Ce & Dcgi Approved , Ventricular Leadpacing Lead For Dddpermanent Pacemakers Us Fda / Ce & Dcgi Approved , Pacing Leads For Vdd / Vddr Pacemakers Us Fda / Ce & Dcgi Approved , Pacing Leads For Vvi / Vvir Pacemakersus Fda / Ce & Dcgi Approved , Epicardial Lead For Pacemakersus Fda / Ce & Dcgi Approved , Temporary Pacing Leads - Us Fda / Ce & Dcgi Approved 1. Should Be Us Fda & Dcgi Approved 2. Should Have 10 Cm Depth Markers To Enhance Placement. 3. Should Have Smooth, Polyurethane Hemocompatible Coating. 4. Should Have Clearly Marked Terminals. 5. Should Have Shrouded 2 Mm Pin Connector Leads. 6. Should Have Stainless Steel Centre Conductor And Stainless Steel Electrodes. 7. It Should Have Solid Core Enables User To Customize The Curve. 8. Should Have Optimal Torque Control For Challenging Anatomy , Temporary Pacing Leads: Balloon Floatable – Us Fda / Ce & Dcgi Approved 1. Should Be Us Fda & Dcgi Approved 2. Should Be Latex Balloon Tipped, Flow Guided For Stable Insertion. 3. Should Have 10 Cm Depth Markers To Enhance Placement. 4. Should Have Smooth, Polyurethane Hemocompatible Coating. 5. Should Have Clearly Marked Terminals. 6. Should Have Shrouded 2 Mm Pin Connector Leads. 7. Should Have Platinum Electrodes 8. It Should Have Flexible Tip Design For Delicate Placement. , Temporary Pacing Leads With Stylet - Us Fda / Ce & Dcgi Approved , Pulse Generator ( Temporary ) , Lead Extraction System Of Different Variety , Vvi / Vvir Leadless Pacemaker With All Accessories Us Fda Approved / 7Years Warranty Permanent Leadless Pacing Capsule Providing Vvi / Vvir Pacing The Weight Of The Device Should Be Less Than 2Gms And Volume Less Than 1 Cc Must Be Mri Conditional Pacemaker For Full Body Scan - 1.5T & 3T Must Have Ventricular Capture Management Should Have The Ability To Transmit Data Through Remote Moniter. , Vdd Leadless Pacemaker With All Accessories Us Fda Approved / 7 Years Warranty Permanent Leadless Pacing Capsule Providing Vvi / Vvir / Vdd Pacing The Weight Of The Device Should Be Less Than 2Gms And Volume Less Than 1 Cc Must Be Mri Conditional Pacemaker For Full Body Scan - 1.5T & 3T Must Have Ventricular Capture Management Should Have The Ability To Transmit Data Through Remote Moniter , Subcutaneous Icd 3Tesla Mri Compitable , Group I Diagnostic Ep Catheters , Deflect. Decaduapolar ( 20 Poles ) For A Flutter ---- All Diameters , Deflectable Decapolar ( 10 ) ( Pulm. Vein ) --- All Diameters , Defectable Decaduapolar ( 20 ) ( Pulm. Vein ) --- All Diameters , 2F Multipolar ( > Ten Electrodes ) For Mapping Through Coronary Vasculature , Basket Catheter With Accessory , Crista Catheter With Accessory , Other Special Ep Catheters , Pacing Catheter With Angiogrophic Capability • Variable Sizes • Bipolar Or Quadripolar With Appropriate Cable • Cvp Monitoring & Angiographic Facility , Pediatric Use : All The Above Catheters, Sheaths Etc For Pediatric Use. • Implying Smaller French Size Like 4F, 5F, With Certification For Use In Children , Pentapolar Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Octapolar Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval –- Us Fda / Ce & Dcgi Approved , 16 Pole Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , 20 Pole Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , 24 Pole Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Bi-Directional Steerable Catheters Handle- Thumb Wheel Or Push Pull Automatic Curve Lock Mechanism Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Atrial Mapping Catheters Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Dual Curve Rf Ablation Catheter Bi-Directional Steerable Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Reusable Defibrillation / Transcutaneous Pacing Patches ( Suitable For Equipment In Cath Lab, Ct2, Ct3, Ct6 ) , Disposable Defibrillation / Transcutaneous Pacing Patches ( Suitable For Equipment In Cath Lab, Ct2, Ct3, Ct6 ) , Defibrillation / Transcutaneous Pacing Patches For Use In Infants And Children , Cryo Catheters ( And Accessories ) For Ablation Of Arrhythmias In Children And Adults , Intracardiac Ultrasound / Echo Catheter For Guiding Rfa Compatible With The Existing Echo Machine At Pbm Hospital, Bikaner ( Quote All Prices Of The Catheters And Accessories ) , Disposable Electrocautery Patches For Rfa , Reusable Electrocautery Patches For Rfa , Magnetic Based Patches For Electro-Anatomical Mapping For Used With Ensite Precision Mapping System. , Velocity Array Catheter , Cool Pump Cable / Tubing Set , Sheaths Used In Ep Study And Rfa Sro Sl, Azulix , Bidirectional Sensor Enabled Contact Force Catheter Compatibable With Ensite Precision System With Assorted Curve. , Irrigated Bidirectional 16 Electrode High Density Sensor Enable Mapping Catheter Compatible With Ensite Precision System , Irrigated Bidirectional Ablation Catheter For 3D Mapping With Flexible Tip And Laser Cut Technology Compatible With Ensite Mapping System. , Irrigated Bidirectional Ablation Catheter For 3D Mapping With Flexible Tip And Laser Cuttechnology Compatible With Ensite Mapping System
