Tender For Supply Installation Of Different Godrej Make Lab Furniture Fixtures Test Bench Storage Cupboard For Wsc At Mancheswar Industrial Estate Bhubaneswar, mancheswar-Odisha

Supply Installation Of Different Godrej Make Lab Furniture Fixtures Test Bench Storage Cupboard For Wsc At Mancheswar Industrial Estate Bhubaneswar Godrej Make Lab Furniture Fixtures Test Bench Storage Cupboard For Wsc , Lab Furniture (Test Bench & Storage Cupboard) , Supplying & Installation Of Godrej Make Model - Apo Test Bench (Product Code -Apombr03s0v0v001pd , Top Size – L 1800Mm X W 900Mm X H 750Mm, Modesty Height - 300Mm)Top Thickness - 40Mm. Fixed With 4 Module Plate Board -2Nos, 6A, 1Way Switch - 2 Nos. On Each Board, 6/6A, 6 Pin Shutter Socket - 2 Nos. On Each Board With Cupper Wire Earth Connection And 5.5 Copper Wire For Connecting With 32 Amp Two Way Dpmcb Including Cost Of All Material, Manufacturing, Transportation, Loading, Unloading, Placing In Position Etc Complete In All Respect As Per Direction Of The Technical Specification And Direction Of The Engineer-In-Charge. (Excluding Gst) , Supplying & Installation Of Godrej Make Panel Board C/W Storage Cupboard – Size – (W2000mm Xd490mm X H1820mm). Upright - The Metal Upright With Under Structure Is There Of Overall Dimension2000 W X 1820 H X 490 D,Bottom Shelf- A Metal Shelf Is There In The Bottom Of The Cabinet Of Load Capacity 25 Kg. Panel Board Cum Storage - On The Top Of The Upright Structure Two Plywood Panel Board Is Given On Both The Sides For The Mounting Of The Equipments And On The Two Sides Two Storage Cupboards Are There With Drawer Lock. , Pre-Treatment And Surface Finish Particularsspecification Results 1. Shade As Per Std. Close,2. Baking Schedule (Obj.Temp.) 200°C/10 200°C/10,3. Dry Film Thickness (Microns) 50-60 80,4. Gloss@60° 65To75 90,5. Impact ( Kgcm) 150 Passes,6. Erichsen Cupping Value(Mm) 8 Passes,7. Flexibility (Mm) 3.25Mm Passes,8. Cross Hatch Adhesion Gt 0 Passes,9. Scratch Hardness (Gms) 3000G Passes, 10. Pencil Hardness 2H Passes,11. Specific Gravity 1.6+0.200 1.62,12 .Salt Spray Test 500Hours Passes. The Raw Material Used In Production Of The Unit Provided Should Be Virgin Steel. The Same Should Undergo 7 Steps Anti Rust And Anti-Corrosion Treatment With Special Hot Oil Treatment To Safeguard Against Saline And Humid Conditions. The Final Product Should Be Powder Coated To 80-Micron Thickness With Epoxy Polyester Blend.Including Cost Of All Material, Manufacturing, Transportation, Loading, Unloading, Placing In Position Etc Complete In All Respect As Per Direction Of The Technical Specification And Direction Of The Engineer-In-Charge. (Excluding Gst)

INR 11800 /-

INR 38000.0 /-

Refer document