Tender For Upgradation Of Mpcs At Chrawani Charisharief.--- 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge 2 Providing and laying of stone soling 75mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete. 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 43 coarse sand : 6 graded stone aggregate 20 mm nominal size) 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 7 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 8 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V Level including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) 9 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 10 Centering and shuttering including strutting, propping etc. and removal of form work for: 11 Foundations, footings, bases of columns etc. for mass concrete 12 Lintel, beams, plinth beams, girders, bressumers and cantilevers. 13 Suspended floors, roofs, landings, balconies and access platforms. 14 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 40mm thick with 20 mm nominal size stone aggregate. 15 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 16 Supplying, filling, spreading and leveling stone boulders of size range 100mmor below duly hand packed incl. all leads lifts, head loads all carriages involved upto site of work complete as per the direction of E.I.C. 17 Providing and applying Plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete 18 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 19 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover 20 Providing and fixing of lighting point incl. wiring for lighting points in 1.5 Sqm PVC insulated Copper wire& 2.5 Sqm PVC insulated multi strand copper wire for lighting sub mains 6 Amp one way switch, 2mm thick PVC conduit/ channel with bends, junction boxes etc, 6 Amp S Pole MCB, 10 AMP DP MCB, 2 way DB for housing MCB and Hylem Sheet with wooden box recessed in walls with accessories 21 Providing and fixing of heating point incl. wiring for heating points in 2.5 Sqm PVC insulated Multi Strand copper wire & 4 Sqm PVC inculated multi strand copper wire for heating submains, 16 Amp switch socket combined, 2mm thick PVC conduit/ Channel with bends, junction boxes etc, 10 Amp S Pole MCB, 2 way DB for housing MCB and Hylem sheet with wooden box recessed in walls with accessories 22 Carriage of different material by mechanical trasnport from source to site of work including loading and unloading complete 23 Stone aggregates for average lead of 32 km 24 Sand For an avg. lead of 25 Km 25 Bricks for an avg. lead of 20 Km
