Name of Work: Replacement of 1 no. 4 Passanger Lift in TE Tuticorin(Recall).
Sl. No.
Item Description
1
Part A : SITC of4Passenger Lift.Supplying, Installation, Testing, Commissioning (SITC) of04 Passenger capacity (272Kg)Passenger lift (Gearless) for G+3 floors having a travellingspeed of 0.6 m/sec with travel distance of approx: 14 Mtrs. suitable to work on 3phase, 400/440 volts AC supply comprising of equipment including Microprocessor based VVVF drive, Car, Controller, Counter weight, devices, Control devices, Car position indicators, Battery operated alarm bell /emergency light, Stainless steel finished car interior, Doors, Self-leveling devices, Terminal buffers, Pit ladder, Ropes, Safety devices, Car & landing push buttons, Floor announcer including Infra-red curtain, Automatic Emergency Rescue Device,all wiring connections, interconnections Fireman\"s switch and miscellaneous items like supports for guide rails ... etc. i/c minor building works, making good the same, conducting tests, offering Lift for inspection by Lift inspector, Liasoning with the inspector office ....etc. complete as per detailed specifications/standard designing according to site conditions conforming to the latest Lift act and modern Lift specification as required. (Location of Lift: TE Bldg. Tuticorin)
2
(i) Speed : 0.6 Meter Per Second(ii) Floors: Ground + 3 Floors(iii) Travel :14 Metres (Approx)(iv) Stops & Opening: 04 Nos (All on same side)(v) Controller : Microprocessor based AC Variable Voltage & Variable Frequency. (vi) ARD complete with dry maintenance free batteries as reqd(vii) Operation:- Microprocessor based Simplex Selective collective control with/without attendant(viii) Power : 415V, 3Phase, 50 HZ, 4 Wires system (ix) Type of Doors:Car door : Power door centre opening, Horizontal sliding, Stainless Steel Scratch proof (moon rock finish) Landing door : Power door centre opening, Horizontal sliding, StainlessSteel Scratch proof (moon rock finish) / MS doors finished with spray painting of approved shade x) A hand rail not less than 600 mm long at 900 mm above floor level to be fixed adjacent to the control panel in lift car.(xi) Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
3
Part B : Buy back of existing old liftLESS amount towards buyback of existing 1 no life expired 4P Liftat TE Bldg.Tuticorin for G+3 Floors (in as is where is condition) including dismantling all the lift equipments like car, counter weight, self levelling devices, control devices, doors, terminal buffers, ropes, safety devices, sensors with all wiring connections, interconnections and miscellaneous items like supports for guide rails, removing/cleaning debris left out in lift shaft / Lift room, making good damages if any .... etc complete as required.(Under Buy-Back Arrangement - Base Rate - Rs.1,00,000/- per Lift The Agency may quote Higher. If quoted rate below base value then base vaule is taken as final quoted rate)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
