Tender For Provision Of Certain Sanction Works ( Phase-Iii ) Under Ge ( S ) Tezpur; 1 Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth in foundation and getting out in soft/loose soil.Complete all as specified and as directed. 2 Returning filling and spreading leveling watering and well ramming in layers n.exc 25 Cm in soft/loose soil.Complete all as specified and as directed. 3 Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the staring point in soft/loose soil all as specified and as directed. 4 Demolition of brickwork or stone/boulder masonry, built in cement mortar.Complete all as specified and as directed. 5 M&Lfor Brickwork with subclass ‘B’ bricks,, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght notless than 75 kg/Sq cm.Complete all as specified and as directed. 6 Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in halfbrick thick wall built in cement mortar ( 1:4) having compressive strenght notless than 75 kg/Sq cm.Complete all as specified and as directed. 7 Demolition ofreinforced cement concrete (reinforcement cut as required).Complete all as specified and as directed. 8 M&L RCC M-25 (Desing Mix) (20mm graded aggregate) as in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, deck slab and in shelves and the like all a specified and diredted 9 M & LRCC M-25 (Desing Mix) (20mm graded aggregate) as inmud stops, rounded or chamfered on edges in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates,and the like includingweathering, slightly roundedor chamfered angles andthroating.Complete all as specified and as directed. 10 M&L for Use & Waste of Formwork to sides and soffits of floor or roof beam , beam haunching, girders ,lintels shevles inclusidng support and hangs.Complete all as specified and as directed. 11 M&L for Formwork to soffits of suspended slabs such ascooking slaband similar work; not exceeding 200mm thick (Horizontal or sloping).Complete all as specified and as directed. 12 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.Complete all as specified and as directed. 13 All as per Item No 12 above but 6 to 8 mm as in stirrups.Complete all as specified and as directed. 14 Dismantling asbestos cement corrugated, semi corrugated etc sheets in roof covering.Complete all as specified and as directed. 15 S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550 Mpa as in roof covering ,including end creep at sloping end of creep length 200 mm to 250 mmetc fixed with self tapping screws as specified.Note -: Creep length shall be measured and paid in same item. 16 All as per item ser No 15 above but plain sheet for ridge ,gutter,Eaves board etc fixed with self tapping screws as specified. 17 Dismantlingfloor hearth wall tiling incl cement mortar bededing(but not backing).Complete all as specified and as directed. 18 Demolition of reed, lathing, single or double including battens and plasters or chicken wire lathing.Complete all as specified and as directed. 19 M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing.Complete all as specified and as directed. 20 M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing.Complete all as specified and as directed. 21 M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.Complete all as specified and as directed. 22 S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile esceeding 0.18 Sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4)complete all as specified and as directed 23 M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.Complete all as specified and as directed. 24 S&F Coloured Glazed ceramic tiles 450 x 350 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm screed bed in Cement mortar (1:4).complete all as specified and directed. 25 M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15mm thick screed bed in CM 1:6.Complete all as specified and as directed. 26 M&L 20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. 27 M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement(1:2) using marble dust with admixture of pigment to match with shed of graniteover and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed. 28 Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters.Complete all as specified and as directed. 29 S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee26x24x0.55mmand 32mm x 24mm x 0.55mmwith 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress.Complete all as specified and as directed. 30 Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed 31 S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. 32 S&F steel work in tubular truss or post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge. 33 Refixing only steel truss,rafter and purline of different size bend to shape, cut to length etc, including necessary welding,special shape washer, as directed by Engineer in Charge. 34 S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed 35 S & F clamps hold fasts, ties hooksand similar small articles conforming to Fe-290 Gde-E-165 and fixed complete all as specied and directed 36 M&L for 75/110 mm dia of outlet PVC(SWR)floor trap, plain with granting including jointing with solvent cement all as specified and directed 37 Supply and fix as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. 38 S&F bathroom mirror cabinet size of 450 x 350 mm with all necessary fittings complete all as specified and directed. Make- Prayag,Cat No-557 or equivalent make of parryware/Hindware. 39 Supply and fix,as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. 40 Supply and fix,waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. 41 Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHBcomplete all as specified and directed. 42 Supply and fix,as in repair, CP 40mmdia waste couplingwith inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed. 43 Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for complete all as specified and directed. 44 Supply and fix, as in repair, Overhead Shower 100 mm dia Round Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. 45 Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated)with 1 Meter Long Easy Flex Tube inChrome Finish & Wall Hook complete all as specified and as directed. 46 S&F in repairs 15mm dia stop valve fancy type chromium plated with long shank and cupscrewed both ends for iron pipe or for unions and fixed complete all as specified and directed 47 Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. 48 Supply and fix, as in repair,vitreous china wash basin, white,flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. 49 Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed. 50 Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed 51 Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. 52 S&F in repairbrass choromium platedtowel rail 600 mm long complete all as specified and directed. 53 S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws.Complete all as specified and as directed. 54 S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 55 S&F in repair15mm bore dia brass choromium platedwall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 56 S&F in repairs center hole basin mixer without pop-up waste system complete all as specified and directed. 57 S&F in repair brass chromium plated Towel Ringround /square 150mm dia fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. 58 S&F in repairs angle cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed. Make - JaguarModel NoALI-85053 Angular Stop Cock with Wall Flange.Complete all as specified and as directed. 59 Supply and fix, as in repair, sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.Make - Nirali /Anjali/Prayag. 60 S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed. 61 Taking up or down 15 mm steel tubing and connection, including cleaning for re fixing or removal to strore.Complete all as specified and as directed. 62 Taking up or down 20mm steel tubing and connections including cleaning for re fixing or removal to store.Complete all as specified and as directed. 63 S& F for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors complete all as specified and directed 64 S&F for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors.Complete all as specified and as directed. 65 Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. 66 Dismanting timber scantling 40 Sqcm and over in secion in any position inframed work or unframed work.Complete all as specified and as directed. 67 All as per Ser Itme no 66 above but In fillets, rails , posts, rafters and purlins etc under 40 sqcm in section unframed work.Complete all as specified and as directed. 68 M&L 2nd class HW in scantling fixed clean swan in framed work.Complete all as specified and as directed. 69 M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails.Complete all as specified and as directed. 70 Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as directed. 71 Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Complete all as specified and as directed. 72 Refixing of shuttersof any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.Complete all as specified and as directed. 73 S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.Complete all as specified and as directed. 74 S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction.Complete all as specified and as directed. 75 S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube as specified & directed. 76 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting offrame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheetbeading & jointed together with solvent cement all as specified and shown on drawing.Complete all as specified and as directed. 77 S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.Complete all as specified and as directed. 78 S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter(minimum three panel) open rebated and preparedto receive glass, gauze etcedges of theframing plain chamfered or rounded fitted with cut andmitred beads for securing glass etc sizes of members as specified all as specified and directed 79 S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified and as directed. 80 S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, including locking arrangement anodised aluminium snap beading, screws etc.Complete all as specified and as directed. 81 S&F 75 mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.Complete all as specified and as directed. 82 S&F 100 mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.Complete all as specified and as directed. 83 S&F MS 200mm ordinary l rod pattern spring including roller and roller plate.Complete all as specified and as directed. 84 S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.Complete all as specified and as directed. 85 S&F Aluminium anodised sliding doorbolts of size 250 mm long and fixed with screws.Complete all as specified and as directed. 86 S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.Complete all as specified and as directed. 87 S&F 4 mm thick heat absorbing glass of any size with aluminium bedding and complete all as specified and directed. 88 S&F 3 mm thick sheet glass ordinary quality and glazing with oil puttyin square not exc 0.50 sqm in each pane complete all as specified and directed. 89 S& F 4.0 mm thick sheetglass ordinary quality and glazing with oil putty in squaresexc 0.5 sq. m in each panein squares.Complete all as specified and as directed. 90 S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.Complete all as specified and as directed. 91 Taking down cement plaster, of any description on brick or stone walls or of lathing etc including racking out joints, hacking for key, scrubbing down with water all as directed. 92 M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm.Complete all as specified and as directed. 93 M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair without using extra.Complete all as specified and as directed. 94 M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement.Complete all as specified and as directed. 95 M & L, 10mm thick rendering in C.M. (1:6) on brick workfinished even and smooth without using extra cement.Complete all as specified and as directed. 96 Supply & fix in repair 25mm dia Stainless steel curtain rod with two Nos of socket complete for doors/window opening all as specified and directed. 97 M&LApplying two coats of acrylic emulsion distemper to newly plastered/previously untreated wall over a coat of 1 mm thick layer wall care putty over a coat of damp shield primer by smart painting method including preparation of newly platsered wall.Complete all as specified and as directed. 98 M&LApplying two coats of acrylic emulsion distemper to old plastered wall over a coat of 1 mm thick layer wall care putty over a coat of damp shield primer by smart painting method including complete removal of existing treatment.Complete all as specified and as directed. 99 M&LApplying twocoat of acrylic emulsion distemper by smart painting method to old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot.Complete all as specified and as directed. 100 M&L two coat of white wash on old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surface of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed 101 M&L three coats of white washincluding preparation of new plaster surfaces as in wallscomplete all as specefied and directed. 102 M&L three coats of white washincluding preparation of new plaster surfaces as in ceilingcomplete all as specefied and directed. 103 M&L complete removal of existing treatment and appplying two coats of weather coat(Apex of Asian or equivalent in dulux, Berger) over 1 mm thick layer of wall care putty anda coat of damp shealth primer by smart painting method toold plastered walls as per manufacturer instrcution including properly fillings the cracksand apllied by approved applicatorcomplete all as specified and directed 104 M&L preparation of newely plaster sufaces andappplying two coats of weather coat (Acrylic water proofing paint) over 1 mm thick layer of wall care putty and a coat of damp shealth primer tonew plastered walls by smart painting method as per manufacturer and apllied by approved applicatorcomplete all as specified and directed. 105 Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.complete all as specefied and directed. 106 M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation, filling and mass concrete all as specified and as directed. 107 M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr and every corner andfilled with bituminous fillercomplete all as specified and as directed. 108 M & L PCC 75 mm thick , 1:4:8 type D-2, using 40mm graded stone aggregate as in sub base all as specified and as directed. 109 M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub baseeven and rough to recieve the topping layeras in sub base all as specified and directed 110 M&L 40 mm thick,Cement concrete, type B-1, (1:2:4), 20 mm graded aggregate as in floor making finished even and smooth using extra cement.complete all as specefied and directed. 111 M&L for Hard core of gauge n.exc. 63mm of broken stone, and leveled in layers n.exc. 15cm thick watered and rammed to a true surface all as specified and as directed. 112 M&L Machine pressed precast concrete interlocking paver block (Glazed finish )with Grey cement and pigment any shape any size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.complete all as specefied and directed. 113 S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed. 114 S & F continuous(Piano) hinges 30 mm width mild steel ,bright finishfixed with screw complete all as specified and directed. 115 S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed. 116 M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.complete all as specefied and directed. 117 M&L preparation of old wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint .complete all as specefied and directed. 118 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 119 M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. 120 Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed. 121 S&F in repairs PVC (SWR) 75 mm dia bends/Tee any radius all as specified and directed. 122 M&Lin repairs Prelaminated particle board 18/19 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.complete all as specefied and directed. 123 M&L 12 mm thickVeneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face, fixed with screws to timber frame work(Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) complete all as specified. 124 S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as directed by Engr-in-charge. Make:Hettich or equivalent. 125 S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black all as specified.Make:Hettich or equivalent. 126 S&F Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size all as specified. 127 S&F SS304 box type Cargo cutlery basket with width 436 mm, depth 500 mm and height 94mm fixed in kitchen cabinet complete all as specified.Make:Hettich or equivalent. 128 S&F OrgaTray 570 - 500mm Depth, 900mm Width for 94 mm drawer side profile height set includes variable dividers for organising drawer in any way plastic silver, dividing elements, anthracite fixed in kitchen cabinet complete all as specified.Make:Hettich or equivalent. 129 S&F CargoTech M Stainless Steel Wire Basket (Thali/Jar Basket) size 536 mm (W) x 500 mm (D) x 200 mm (H) ,Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified.Make:Hettich or equivalent. 130 S&F CargoTech M Stainless Steel Wire Basket (Plain)size 436 mm (W) x 500 mm (D) x 150 mm (H),Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified.Make:Hettich or equivalent. 131 S&F Stainless Steel, Chrome plated Bottle Pullout Carcase width 300 mm fixed both layers with acrylic plastic sheet makes it visually appealing and sturdyin kitchen cabinet complete all as specified.Make:Hettich or equivalent. 132 Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch,socket, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc.complete all as specefied and directed. 133 Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified. 134 Taking down DB/MCB /MCCBmain switch of any size and making good disturbed surface of wall/floor complete all as specified. 135 Taking down fans sealing cable ends dismantling blades and removing fan and keeping in safe custody for reuse.complete all as specefied and directed. 136 Taking down old U/SFlourescent/LED light fittings any type and size.complete all as specefied and directed. 137 M & Lfor point wiring for one light/fan/Bell point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through and including PVC concealed with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated andunsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wallof not less than 1.6 mm thick for mounting of fittings such as modular switches, sockets and regulators with Modular PVC flush box and Modular White Cover plate with frame all as specified and directed including taking down old unserviceable point wiring.complete all as specefied and directed. 138 All as per Ser item No.137above but for 5 amps socketon same board with other switches 139 All as per Ser item No.137above but for 5 amps socket on independent board. 140 All as per Ser item No.137 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed. 141 M & Lfor point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through and including PVC casing capping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated andunsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wallof not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make Hylum) cover all as specified and directed. 142 All as per Ser item No. 141above but for 5 amps socket on independent board. 143 All as per Ser item No.141 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed. 144 Supply and fix of Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through and non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed including with all fittings and accessories and 1X4.0 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.complete all as specefied and directed. 145 Supply and fix of Modular switch 1 way 6A, 1 module.complete all as specefied and directed. 146 Supply and fixof Modular switch 1 way 16A, 1 module.complete all as specefied and directed. 147 Supply and fix of Modular Bell push 6A 1 module.complete all as specefied and directed. 148 Supply and fix of Buzzer, Ding Dong AC. 230 volts, single pole.complete all as specefied and directed. 149 Supply and fix ofModular Socket, 6A - 5 pin combined 2 module.complete all as specefied and directed. 150 Supply and fix of Modular Socket 16A - 5 pin combined 2 module.complete all as specefied and directed. 151 Supply and fix of ceiling rose surface backelite 65x50 mm having 3 terminals.complete all as specefied and directed. 152 S&F PVC angular holder polycarbonateas specified and directed. 153 S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specefied and directed. 154 Supply and fix switch socket combination outlet flush type, 5 Pin, 5 amps.complete all as specefied and directed. 155 Supply and fix switch socket combination outlet universal type 5 pin 16 amps.complete all as specefied and directed. 156 S & Fin replacement MCB DB TPN 4 waydouble door complete concealed in wall all as directed. 157 S & F MCB DB Single pole and neutral 8 waySingle door with 200 amps rated bus bar complete all as specefied and directed. 158 Supply and fixingin replacement 415V, 10KA,B curve miniature circuit breaker (MCB) of TPN and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioningas specified and directed. Make: Havells/Legrand/L&T/Standard/HPL 159 Supply and fixing amp rating 32 Amps, 240V, 10KA C curve miniature circuit breaker (MCB) of SPN and current carrying capacity in the MCB DB complete with connection testing and commissioning..Make: Havells/Legrand/L&T/Merlin Gerin/Standard 160 Supply and fixing amp rating 6 to 32 Amps, 240V, 10KA C curve miniature circuit breaker (MCB) of Single pole and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Merlin Gerin/Standard 161 Supply and fixing in replacement LED Bldg security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeincluding GI Pipe 40 mm dia bracket 1.2 mtr in length bent to shape of 120 degree with MS flat bracket 2 Nos, washers, nuts, bolts etc.Make: Surya/ Havells/ Bajaj/ Wipro/ Simoco/ Phillips/ Crompton or equivalent 162 M&L for rewinding of ceiling fan,1200mm any make and any type of model, after takingburnt out old winding wire complete andcleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings both complete all as specified and directed 163 Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan.complete all as specefied and directed. 164 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specefied and directed. 165 Supply and fix Heavy duty exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers.complete all as specefied and directed. 166 Supply and fix of Kitchen Chimney Faber 90cm, 1500 cum/hr Auto-Clean curved glass kitchen Chimney including necessary fitting accessary and cutting/hole in roof/wall suitable sizecompleteall as specified and directed. 167 Supply and Fixingwall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make of Havells cat no.LHEXACP7IN1W020 & equivalent hilips/Havells/CG/surya. 168 Supply and Fixingwall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting. Make of Havells cat no.LHEXACP7IN1W010 & equivalent hilips/Havells/CG/surya. 169 Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps concealed in wall all a directed. 170 Supply and fixingwater heater (Geyser) Vertical storage type, single phase, energy saving 5 star rated 230 volts grade insent type 25 Ltrs storage capacity complete with fixing accessories and connection pipe. Make : Usha Cat No. SWH MISTY or equivalent in Havells/Bajaj/Orient/Crompton 171 M/Lfor Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GIand GI tubing 15mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I.complete all as specefied and directed. 172 S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq mm 3.5 core.complete all as specefied and directed. 173 M&L forsand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :-Punned thickness of sand layer shall be measured abd paid to contractor. 174 M&L for Brick Sub Class B locally available best qualitylaid in trenches with width equal to length of the bricks, above sand cushioning for cable protection completeall as specified and as directed. 175 Supply, lay and fix in replacement 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. 176 Dismantling water tanks and removing to store for credit to Contractor.complete all as specefied and directed. 177 Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 2000 ltrs all as specified in SSR Part I.complete all as specefied and directed. 178 Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I.complete all as specefied and directed. 179 Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms).complete all as specefied and directed. 180 Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specefied and directed. 181 Supply and fix Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed .complete all as specefied and directed. 182 Supply and fix Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 20 m m - 2 1 0 g m s).complete all as specefied and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractors supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractors firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
