}

Constructing Ht Line Using Covered Conductor For Installing 100 Kva Transformer At Kattukunnumpuram ,Mynagappally Under Esd Sasthamcottaon Turnkey Basis, mynagappally-Kerala

Kerala State Electricity Board-KSEB has published Constructing Ht Line Using Covered Conductor For Installing 100 Kva Transformer At Kattukunnumpuram ,Mynagappally Under Esd Sasthamcottaon Turnkey Basis. Submission Date for this Tender is 01-08-2023. Overhead Line Tenders in mynagappally Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

38786326
Constructing Ht Line Using Covered Conductor For Installing 100 Kva Transformer At Kattukunnumpuram ,Mynagappally Under Esd Sasthamcottaon Turnkey Basis
Open Tender
Indian
Kerala
mynagappally
01-08-2023

Tender Details

Constructing Ht Line Using Covered Conductor For Installing 100 Kva Transformer At Kattukunnumpuram , Mynagappally Under Esd Sasthamcottaon Turnkey Basis

Key Value

Document Fees
INR 5900 /-
EMD
INR 24000.0 /-
Tender Value
INR 15.93 Lakhs /-

BOQ Items

Name of Work: Constructing HT Line Using Covered Conductor For Installing 100 kva Transformer at Kattukunnumpuram ,Mynagappally Under ESD SasthamcottaOn Turnkey Basis
Sl. No. Item Description
1MATERIALS
2Covered Conductor HT 70 sqmm
3Pin Insulator 11kV Composite Polymeric
4Insulator Tie for Covered Conductor
5Disc Insulator 11 kV Composite Polymeric – Covered Conductor
6Hardware Fittings-G.I-for HT Covered Conductor
7Midspan Joint set for Covered Conductor HT
8Single core termination kit for Covered Conductor
9Lightening arrestor 9 kv ,10kA (Distribution Classes)Composite polymer housing
10Insulation Piercing Connector Set for Covered Conductor HT
11LABOUR
12Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.
13Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).
14Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.
15Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.
16Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.
17Additional rate for providing one disc set on any type of HT pole for making cut point.
18Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.
19Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon
20Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.
21Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).
22Fitting one set AB switch and giving connection
23Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.
24Drilling hole of various sizes on existing Channel/Cross Arm.
25Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.
26Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.
27Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.
28Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials.
29Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.
30Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.
31Dismantling (without damage) one HT stay incl. back filling, and bringing back to section store.
32Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling
33Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.
34Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.
35Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.
36Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.
37Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
38Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
39Erecting one LT PSC Pole in position incl. digging & back filling pit.
40Providing Stay for LT poles incl. digging & back filling pit.
41Conversion of one km LT Sph 3 wire line to 3ph 5 wire line incl. dismantling existing 3 conductors, stringing 3 ACSR Rabbit & 2 waeasel including conveyance .
42Stringing one km LT 3ph 5 wire line (Rabbit for Ph and Weasel for N&St.main) incl. fitting cross arm etc. removing touchings and conveyance of materials.
43Providing/Inserting 2 line spacer on the existing LT OH line.
44Providing/Inserting 3 line spacer on the existing LT OH line.
45Cutting trees beyond 120cm but upto and incl. 180cm girth, cutting of trunks/branches, removing the root completely and stacking.
46Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.
47Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.
48Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation
49Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.
50Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.
51Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.
52Providing one Earth using earth pipe incl. Digging separate pit at standard distance away from the pole/structure & backfilling.
53Fitting one set (3No.) 11kV LA and givingconnections excluding earthing.
54Doing straight joint on cables of sizes upto and incl. 3x185 sqmm using the cable jointing kit supplied departmentally as per Specification.
55Doing one cable end termination on cables of sizes upto and incl. 3x185 sqmm using the cable jointing kit supplied departmentally.
56Installation of Insulation piercing connector for main to service line main :25-95sqmm, Tap : 25-95sqmm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail