Tender For Civil Work - Walkway In Pocket A-2 Sector-Imp And Dev. Of Park Walkway By Pdg. Colour Interlocking Tile In Fromt Of A-2 / 288 Sector-8 Rohini In Ward No. 53 M-I / Rz., Dsr 2018 And Approved Items. 1 Walkway 2 16.83:Taking Out Existing Cc Interlocking Paver Blocks From Footpath / Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. 3 15.56:Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 4 16.64:Providing And Laying 75 Mm Thick Compacted Bed Of Dry Brick Aggregate Of 40 Mm Thick Nominal Size Including Spreading, Well Ramming, Consolidating And Grouting With Jamuna Sand, Including Finishing Smooth Etc.Complete As Per Direction Of Engineer-In- Charge. 5 110.10:Providing And Fiving Name Board Made Of Ms Sheet 90X60cm, 1Mm Thick With Frame Of Ms Angle 50X50x6mm, Two Diagonal Braces At The Back Of The Sheet Of Ms Flat 40X6mm, Total Height Of The Board Above Ground Level 2.40M, Length Of Legs Below Ground 0.30M Embedded In Cc Block 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20Mm Nominal Size ) 30X30x45cm Including Excavation And Removal Of Surplus Earth With In 50M Lead, Applying Priming Coat Of Approved Steel Primer, Painting With Synthetic Enamel Paint Of Approved Quality And Lettering With Enamel Paint Of Approved Colour ( One Side ) As Per Drawing / Direction Of Engineer-In-Charge 6 15.7.4:Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar 7 6.1.2:Brick Work With Common Burnt Clay F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In:Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 8 13.4.2:12 Mm Cement Plaster Of Mix:1:6 ( 1 Cement : 6 Coarse Sand ) 9 13.44.1:Finishing Walls With Water Proofing Cement Paint Of Required Shade:New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) 10 4.1.3:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 11 13.72:Washed Stone Grit Plaster On Exterior Walls Height Upto 10 Metre Above Ground Level, In Two Layers, Under Layer 12 Mm Cement Plaster 1:4 ( 1 Cement : 4 Coarse Sand ) , Furrowing The Under Layer With Scratching Tool, Applying Cement Slurry On The Under Layer @ 2 Kg Of Cement Per Square Metre, Top Layer 15 Mm Cement Plaster 1:1 / 2:2 ( 1 Cement : 1 / 2 Coarse Sand : 2 Stone Chipping 10 Mm Nominal Size ) , In Panels With Groove All Around As Per Approved Pattern Including Scrubbing And Washing The Top Layer With Brushes And Water To Expose The Stone Chippings, Complete As Per Specification And Direction Of Engineer-In-Charge ( Payment For Providing Grooves Shall Be Made Separately ) . 12 13.73.1:Forming Groove Of Uniform Size In The Top Layer Of Washed Stone Grit Plaster As Per Approved Pattern Using Wooden Battens, Nailed To The Under Layer, Including Removal Of Wooden Battens, Repair To The Edges Of Panels And Finishing The Groove Complete As Per Specifications And Directions Of The Engineer-In-Charge:15 Mm Wide And 15 Mm Deep Groove 13 16.91.1:Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size / Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding / Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.60Mm Thick Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern. 14 10.25.2:Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 15 13.61.1:Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 16 1.1.1_10:Disposal Of Materials By Mechanical Transportincluding Loading , Unloading And Stacking Lime , Moorum, Buildingrubbish Lead For 10 Km
