Tender For Dismantling The Existing Wooden Partition At Rangpur Rented Building And Providing Same Partition At 3 Rd Floor Gmtd Chamber Office Including Replacing New Pvc Drainage Pipe At E 10 B Building Silchar(As)., Silchar-Assam

Tender For Dismantling The Existing Wooden Partition At Rangpur Rented Building And Providing Same Partition At 3 Rd Floor Gmtd Chamber Office Including Replacing New Pvc Drainage Pipe At E 10 B Building Silchar(As). SH: Wood and P.V.C. Work 1 Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of „H‟ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. „U‟ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer‟s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 2.10 One Square Metre SH : ROOFING 2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. a) 110 mm diameter 25.00 One Running Metre 3 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. i)_ Bend 87.5° 110 mm bend 4.00 Each ii) Shoe (Plain) 110 mm Shoe 2.00 Each SH : REPAIRS TO BUILDING 4 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. a) With cement mortar 1:4 (1 cement : 4 fine sand). 3.50 One Square Metre 5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 0.60 One Square Metre 6 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge 1.00 Each SH : DISMANTLING AND DEMOLISHING 7 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : a) Of area 3 sq. metres and below 2.00 Each 8 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 3.50 One Square Metre 9 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : a) 100 mm dia pipe 25.00 One Running Metre 10 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leadsdumping ground or as including all lifts involved. 0.50 One Cubic Metre SH: FINISHING 11 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on new work 3.00 One Square Metre SH: Non Available Item 12 Transportation of available material such as wooden partition at 2 nd Floor Rented Building Rongpure to site of work at 3rd Floor GM Chamber E10 B TE Building including loading, unloading all complete as per the direction of Engineer -in-charge. a) Up to 20 Km. 1.00 One Job 13 Refixing the existing available wooden partition & members for partition including doors, windows & its fitting and accessories including door shutter, prelaminated particle board etc. all complete as per the direction of Engineer in charge. (rate includes all labour,screws and nothing extra shall be paid for above operation).New material if required will be paid for separately. 3.50 One Square Metre 14 Credit for the old material obtained from dismantling and demolishing as on where is basis. (a) C.I Pipes -50.00 One Kilogram (b)Wooden Door Shutter -2.00 Each Note: Quantity shown negative as this is a credit to work item. Positive rate quoted by agency shall automatically calculate amount credited to work in lieu of dismantled material to be taken away by contractor

INR 178 /-

INR 585.0 /-

INR 29029.0 /-