Supply Installation Testing Commissioning Of 50 Hp Submersible Pump Set With Allied Enm Equipment At Ranney Well No A2 Yamuna Flood Plain Area, Delhi-Delhi

Supply Installation Testing Commissioning Of 50 Hp Submersible Pump Set With Allied Enm Equipment At Ranney Well No A2 Yamuna Flood Plain Area-Supply Of Pmc Based Star Delta Starter Panel Board Suitable For 50 Hp Submersible Pump Set For Tube Wells Having Following Specifications :- 1. Three Phase, Star Delta Motor Control Panel, 415 Vac 50 Hz.2. Digital Controlling Of Parameters I.E Ampere And Voltage.3. Pmc Based Dc Operated 125 Amp. Power Contractors. 4. Digital Display For Parameters I.E Ampere And Voltage & Motor Run Hour.5. Automatically Over Load Cut Off.6. Under Voltage / Over Voltage Automatically Cut Off.7. Single Phase And Reverse Phase Protection.8. Auto / Manual Mode Selector Switch.9. Mccb- 150 Amp At Incomer To Interrupt The Supply In Faulty Condition.10. Programmable Timer, 220 Volt Ac For Auto Start And Stop.11. Run Hour Meter To Show The Total Time Of Run.12. Led Indication – R Y B.13. Having Locking Arrangement And Door With Gasket.14. Panel Size – 700 X 530 X 200 Mm Approx.15. Gpsp Fabricated, Powder Coated Ip 56 Protection Panel Box. Make Of Panel- Any Approved Make In Djb. 2 Making / Supply Of 3 Mtr. Long 200 Mm Dia. Double Flanged M.S Pipe Having 3 No. L-Type Brackets Duly Welded On Each Side Of Flange. The Flanges Having Four Holes And Cut For Cable. Make Jindal / Tata. 3 Making / Supply Of 3 Mtr. Long 150 Mm Dia. Double Flanged B Class G.I Pipe Having 3 No. L-Type Brackets Duly Welded On Each Side Of Flange. The Flanges Having Four Holes And Cut For Cable. Make Jindal / Tata. 4 Supply Of Three Core 16 Sq. Mm Flat Submersible Cable With Copper Conductor Insulated And Sheathed With Pvc For Submersible Pump Motors With Voltage Grade Upto 1100 Volts Conforming To And Marked With Is694:2010.Make – Finolex / Havells / Grandley / Any Other Approved Make In Djb. 5 Supply / Making Of Tail Piece Made Out From 200 Mm M.S Pipe 500 Mm Long With One End Threaded As Per Outlet Of Pump And Another End Flange As Per Size Of 200 Mm Pipe. Make – Tata / Jindal. 6 Supply Of M.S. Bend Of 200 Mm Dia, 900 Heavy Duty. 7 Supply For Heavy Duty M.S Clamp In Two Pieces Having Two Nos. Of Holes In Each Piece Suitable For Holding 200 Mm Fitting. 8 Supply Of Neoprene Rubber Sheet Having 50% Neoprene, 3Mm Thickness. Make: Jyoti / Worth. 9 Supply Of Nut Bolt & Washer Of Required Size. 10 Installation / Lowering Of All E&M Equipment’S Listed At Sr. No.-1 To 9 And P / Set -50 Hp With Submersible Cable ( I.E The 50 Hp Submersible Pump Set Shall Be Provided By The Departmentally ) In Well With Required Material Handling Equipment’S With All Safety Precautions For Installation In The Deep Well By The Help Of Heavy Labour. The Job Includes Erection The Complete Pipeline With Hardware Equipment’S On Each Joint. The Job Includes Connecting The Delivery Line Of The Submersible Pump With The Existing Header Line By The Help Of M.S Plate, Welding, Cutting And Nut Bolting And Also Includes Arrangement Of Other Required Material And Tool And Tackles For Connecting In Proper Manure. This Job Also Includes Fixing All Above Electrical Items, Laying Of Cables & Making All Electrical Connections Instarter Panel Board With The Help Of Thimbing & Taping In All Respect With The Help Of Skilled Labor As Per Instruction Of Engineer In Charge.The P / Set Shall Be Provided By The Departmentally.

INR 500 /-

INR 9200.0 /-

Refer document