}

Tender For Civil Work - Construction Of Compost Pit,Shed 1Tpd Plant-Construction Of Compost Pit,Shed And Drain Near 1Tpd Plant Sector 11 Rohini ,Ward 22 Eem1/Rz, Dsr 2018 And Approved Items, rohini-Delhi

Municipal Corporation Of Delhi has published Tender For Civil Work - Construction Of Compost Pit,Shed 1Tpd Plant-Construction Of Compost Pit,Shed And Drain Near 1Tpd Plant Sector 11 Rohini ,Ward 22 Eem1/Rz, Dsr 2018 And Approved Items. Submission Date for this Tender is 24-07-2023. Excavation Work Tenders in rohini Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

38680907
Tender For Civil Work - Construction Of Compost Pit,Shed 1Tpd Plant-Construction Of Compost Pit,Shed And Drain Near 1Tpd Plant Sector 11 Rohini ,Ward 22 Eem1/Rz, Dsr 2018 And Approved Items
Open Tender
Indian
Delhi
Rohini
24-07-2023

Tender Details

Tender For Civil Work - Construction Of Compost Pit, Shed 1Tpd Plant-Construction Of Compost Pit, Shed And Drain Near 1Tpd Plant Sector 11 Rohini , Ward 22 Eem1 / Rz, Dsr 2018 And Approved Items. 1 Compost Pit 2 2.8.1:Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil 3 16.64:Providing And Laying 75 Mm Thick Compacted Bed Of Dry Brick Aggregate Of 40 Mm Thick Nominal Size Including Spreading, Well Ramming, Consolidating And Grouting With Jamuna Sand, Including Finishing Smooth Etc.Complete As Per Direction Of Engineer-In- Charge. 4 6.1.2:Brick Work With Common Burnt Clay F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In:Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 5 6.4.2:Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In:Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 6 13.4.2:12 Mm Cement Plaster Of Mix:1:6 ( 1 Cement : 6 Coarse Sand ) 7 13.18:Neat Cement Punning 8 4.1.3:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 9 10.16.1:Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes 10 10.25.2:Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 11 12.50:Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( +0.05% ) , Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X55mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 12 16.68:Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M - 30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge.

Key Value

Document Fees
INR 590 /-
EMD
INR 9500.0 /-
Tender Value
INR 4.73 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail