|
| 1 | supply of good earth filling as per site requirement |
| 2 | PVC Connection |
| 3 | 150mm dia. PVC pipe |
| 4 | 100mm dia. PVC pipe |
| 5 | 75mm dia. PVC pipe |
| 6 | PVC Floor trap |
| 7 | PVC elbow 4` |
| 8 | PVC Socket 3` to 6` |
| 9 | Extra labour for PVC Pipe and specials complete plumber work |
| 10 | Power connection 08KW |
| 11 | Providing at water supply connection in existing line. |
| 12 | Providing at sewer line connection in existing line. |
| 13 | Providing and fixing HDPE Water Storage Tanks of Sintex, Diplast, OK Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connection in tanks complete in all respect to the satisfaction to the Engineer-in-charge. (Except Civil work). Capacity 500Ltrs. |
| 14 | 1. FRP Moulded Canopy (Gazebo Hex. Shape) Double Finishing sheet in 18` Diai) 6 No. Ornamental Design FRP Molded PillarFRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical M.S. pipe of size 88 mm and height 2890mm, the central M.S. pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.0 Paints [Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division)] item with GST, Transportation, Installation with C.C and amp: labor at site.) in required shade.ii)12 No. spndred and 6 no. FriezesFloral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two M.S. pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on M.S. tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with [Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site].iii) 3 No. cast iron/frp base panel railing with frameFloral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in M.S. pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site.iv) One set of top frame with Double Finishing FRP Molded Plastic roofTop frame in MS tubular pipe of size 40 x 40mm properly with FRP molded sheet of 4mm thick with top and bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14” Dia x 2mm thick at the central top for its beautification. Each sheet properly riveted to horizontal sheets complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site. The complete item is fitting at site without C.C Floor and without sitting bench at site. |
| 15 | Providing and fixing of Victorian Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and rest 59” long total 12 Nos. is of MS rectangular pipe 65x25mm x 16 Gauge complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site.@ Rs. 15000/- Each |
| 16 | Supply and Fixing Tank Nipple |
| 17 | Supply and Fixing Gate Valve |
| 18 | Supply and Fixing Jet spring |
| 19 | Providing and Fixing C.P. Jaali |
| 20 | Providing and fixing of Knee Chair complete as per specification |
| 21 | Providing and fixing of Double skier complete as per specification |
| 22 | Providing and fixing of Shoulder wheel complete as per specification |
| 23 | Providing and fixing of Back shaper complete as per specification |
| 24 | Providing and fixing of Air Walker complete as per specification |
| 25 | Providing and fixing of Abs shaper complete as per specification |
| 26 | Providing and fixing of the horse complete as per specification |
| 27 | Providing and fixing of Shoulder shaper complete as per specification |
| 28 | Providing and fixing of parallel bars complete as per specification |
| 29 | Providing and fixing of chest shaper complete as per specification |
| 30 | Providing and fixing of single skier complete as per specification |
| 31 | Transportation All items |
| 32 | Installation charges all items |
