|
| 1 | Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 2 | M&L for brick work with sub class \"B\" bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 3 | Taking down cement plaster of any description on brick or stone masonry wall, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified. |
| 4 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and fair with using extra cement, complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 6 | Demolition of cement concrete (un-reinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 7 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil, all as specified. |
| 8 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates), as in foundation, all as specified and directed . |
| 9 | M&L for cement concrete type B1, 1:2:4 (using 20mm graded aggregate), in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified & directed. |
| 10 | Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position, complete all as specified & directed. |
| 11 | M&L for reinforced cement concrete 1:2:4 (nominal mix) type B-1 (using 20mm graded stone aggregate), as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete 1:2:4 (nominal mix) type B-1 (using 20mm graded stone aggregate), as in columns, pillars, piers, posts and struts, complet all as specified and directed. |
| 13 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter to rough finish of surfaces, all as specified. |
| 14 | M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc. work in rough finished with fair finished surfaces of concrete, complete all as specified and as directed. |
| 15 | M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 16 | All as per item no. 15 above but 5mm dia and over and up to and including 10mm dia in stirrups spacers and binders, complete all as specified and directed. |
| 17 | Demolition of stone slabs or tiles of any description or thickness in any position laid, bedded and pointed in any mortar, complete all as specified & directed. |
| 18 | M&L for 16 to 18mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over & including 15mm thick rendering in CM (1:4) to recieve granite, complete all as specified and directed. |
| 19 | Returning filling in soft/loose soil including spreading, leveling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 20 | Removal of excavated soils from site to in difence land a distance exceeding 250 meters but n exc 500mand depositing where directed at a level not exceeding 1.5 meters above the starting point, complete all as specified and directed. |
| 21 | Excavating in post holes, in any type of soil, (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces, complete all as specified and directed. |
| 22 | Dismantling RCC posts or struts of any section, including taking out embedded portion in concrete or brick work of any position place including swan neck fencing post and making good to disturbed portion, complete all as specified and directed. |
| 23 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates), as in foundation, complete all as specified and directed . |
| 24 | M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 25 | Dismantling chain link fencing fixed with steel fillets & nut bolt etc, of any type, complete all as specified and directed. |
| 26 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 27 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 28 | S&F 10mm dia mild steel round bar of grade Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde -E-165), as in line wire for chain link fencing fixed with GI wire including applying two coats aluminium paint over one coat red oxide primer after preparation of surfaces, complete all as specified and directed. |
| 29 | S&F mild steel screw bolts of dia 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwedboth ends, each screwed end to be fitted with washers and one hexagonal or square nut, of lengthexc 5cm but n exc 10cm, complete all as specified and directed. |
| 30 | S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail staying bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc, complete all as specified and directed. |
| 31 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer, complete all as specified and directed. |
| 32 | M&L for preparation of old steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 33 | M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregates), as in louvres and jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings and including demolition of ols RCC jali, complete all as specified and directed. |
| 34 | M&L for 75 mm thick PCC type C-2, 1:3:6(using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge. |
| 35 | M&L for 75 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in sub base for path, complete all as specified and as directed. |
| 36 | M&L for sand cushioning for laying interlocking paver blocks, complete all as specified and directed. |
| 37 | M&L for machine pressed coloured precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with scratch proof lacquer coating on top surface, with grey cement and pigment laid in path / hard standing, complete all as specified and directed. |
| 38 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 39 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in lroof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 40 | S&F pre-painted galvaume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covelring/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 41 | Dismantling mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 42 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe-410-W(Gde- E-250) quality-B, complete all as specified and directed. |
| 43 | M&L for rolled mild steel section as in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, complete all as specified and directed. |
| 44 | M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality B, complete all as specified and as directed. |
| 45 | M&L for 20 to 25mm thick sand stone slabs, fixed exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match including stainless steel fastener and FI of required length as per site requirement, complete all as specified and directed. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed. |
| 47 | M&L for exterior finish wall tiles as in vertical surfaces of size 300mm x 450mm x 10 mm / 300mm x 600mm x 10mm thick, design and pattern as directed by Engr-in-Charge, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed. |
| 48 | S&F in repairs aluminium composite panels, 5mm thick as in wall cladding/ ceiling, of any colour, shape, size and design, including necessary aluminium frame work required & including all necessary fittings and fixtures and necessary taping, complete all as specified and directed by Engineer-in-Charge. |
| 49 | Taking down the existing MS gates/ doors of size as required on site and refixing the same after necessary easing, oiling, welding etc and making good the disturbed surfaces, complete all as specified and directed.Note: Rates for welding, any fittings required are included in the rate of this item. Nothing shall be paid extra. |
