}

Tender For Painting Work Along With Miscellaneous Work At Nift Bengaluru Campus -, bangalore-Karnataka

National Institute Of Fashion Technology has published Tender For Painting Work Along With Miscellaneous Work At Nift Bengaluru Campus -. Submission Date for this Tender is 07-07-2023. Painting Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

38345861
Tender For Painting Work Along With Miscellaneous Work At Nift Bengaluru Campus -
Open Tender
Indian
Karnataka
Bangalore
07-07-2023

Tender Details

Tender For Painting Work Along With Miscellaneous Work At Nift Bengaluru Campus -1 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and repairing the surface smooth including necessary repairs to scratches etc. complete. 2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make:-JK cement/ Birla/Saint-Gobain/ Iris Paints or equivalents 3 Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade, including 01 coat of cement primer scraping rubbing etc. all complete: Old work (one or more coats) Make: Dulux/ Burger/ Nerolac/ Asian paints or equivalents 4 Finishing walls/Ceiling with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10 sqm)over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. Make: Dulux/ Burger/ Nerolac/ Asian paints or equivalents 5 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work Make: Dulux/ Burger/Nerolac/Asian paints or equivalents 6 Applying priming coats with primer of approved brand and Applying Manufacture, having low VOC (Volatile Organic Compound) content. With water thinkable cement primer on wall surface having VOC content less than 50 grams/litre. Make: Dulux/Burger/Nerolac/Asian paints or equivalents 7 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Make: Dulux/ Burger/Nerolac/Asian paints or equivalents 8 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface Make: Dulux/ Burger/Nerolac/Asian paints or equivalents 9 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 10 Providing and fixing pressed steel door frames conforming to IS: 351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Single rebate profile C Fixing with adjustable lugs with split end tail to each Size (125x60X40)mm Make :- Sehgal doors or equivalents makes 11 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Make :- century/green ply/teak ply or equivalents 12 Providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) 13 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm Make :- standard 4 14 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.

Key Value

Document Fees
Refer document
EMD
INR 25000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail