|
| 1 | Dismantling posts or struts (wood,steel or RCC) any section, including taking out embeded in concrete, brick work, masonry,etc portion and making good disturbed ground complete all as specified and directed. |
| 2 | Excavating in post holes (for similar holes) each n.exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removal surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 3 | S&F Angle iron Posts and struts in fencing including embiding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc, including MS flat iron fillets and MS Nut and bolts,(for securing wire mesh etc.) including all necessary drilling, bolting, welding or riveting, etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 4 | Supply only 10mm dia mild steel round barsas in line bars or hooking at one endfixed independently with chain link fencing orfixed the wire mess as strengthening bar including welding and binding etc complete all as specified. |
| 5 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt n. exc 5cm long dia of shank 5 to 10 mm complete all as specified and directed. |
| 6 | M & L for cement concrete (1:3:6), type C-2, (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 7 | Fixing only galvanised chain link fencing with 4 mm dia of wire made up into matresses with mesh of size 100mm x 100 mm and fixedwith 10 mm dia MS round bars and straining including provision of binding wire, including dismatling the old one complete all as specified and directed (Note: 10 mm dia MS round bar shall be measured and paid separately) |
| 8 | Supply only MS galvanised chain link fencing any type or size complete all as specified. |
| 9 | Preparing the surfaces of new steelworks and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth complete all as specified and directed.. |
| 10 | Preparing surfaces of new steel works and applying two coats of synthetic enamel paint over a coat of red oxide primer n exc 10cm in width or girth complete all as specified and directed. |
| 11 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 12 | Restraining & resecuring the Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining including making good staples etc. & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 13 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.. |
| 14 | S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete with GDE Fe410-0 or Fe 310-O |
| 15 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc all as directed. |
| 16 | M&L for Brick work built in CM (1:6) with well burnt subclass \"B\" bricks, straight or curved on plan exc 6m mean radius all as specified and directed. |
| 17 | M&L for Brick work built in CM (1:4) with well burnt subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick wall all as specified and directed. |
| 18 | Taking down cement plaster of any description on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc to receive new plaster complete all as directed. |
| 19 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises complete all as directed. |
| 20 | M&L for 15mm thick rendering in CM (1:4)on brick work or concrete surface as in wall including finishing the surfaces even and smooth (without using cement) all as specified and directed. |
| 21 | M&L for precast cement concrete (1:2:4), type B1 (using 20 mm graded aggregate) as in copings, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match complete all as specified and directed. |
| 22 | M&L for Broken glass coping on top of walls in cement mortar (1:3) complete all as specified and directed. |
| 23 | M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed. |
| 24 | M&L for one coat of cement base paint after preparation of old decorated surfaces of walls inciuding stipping nails, holes ,filling the cracks with putty by washing, rubbing down etc complete all as specified and directed. |
| 25 | M & L for applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. |
| 26 | M & L for complete removal of existing wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadeICompany Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete all as specified and directed. |
| 27 | M&L for One coat of synthetic enamel paint after preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described all as specified and directed. |
| 28 | Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) all as directed |
| 29 | M&L for 100 mm thick Cement concrete (1:4:8), type D-2, (using 40mm graded aggregate) complete all as specified and directed. |
| 30 | M&L for 50 mm thick Cement concrete (1:2:4), type B-1 (using 20mm graded aggregate) and finishing the surface even and fairwithout using extra cement complete all as specified and directed. |
| 31 | M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub floorcomplete all as specified and directed. |
| 32 | M&L for coloured Chequred cement concrete tile 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20 mm thick cement screed bed in CM (1:6) complete all as specified and directed. |
| 33 | M&L for sand cushioning below interlocking paver block incl spreading and levellingcomplete all as specified and directed. . |
| 34 | S&F in Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigmentany shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade including dismantling complete all as specified and directed. |
| 35 | M&L for Granite work 18 to 20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite including dismantling complete all as specified and directed. |
| 36 | M&L for heavy duty floor tiles of size (300mm x 300mm) x 10 to 13 mm thick of make Deccan Natural or Cresto Brown of Somany or equivalent in HR Johnson or Kajaria, set, jointed and pointed in neat cement slurry with grey cement and pigment or Ezy Grout of Somany to match complete all as specified and as directed. |
| 37 | M & L for external wall cladding tile of size exc 0.06 Sqmbut not exceeding 0.18 Sqm10 to 13mm thick of make Deccan Natural or Cresto Brown of Somany or equivalent in HR Johnson or Kajaria, set, jointed and pointed in neat cement slurry with grey cement and pigment or Ezy Grout of Somany to match complete all as specified and as directed. |
| 38 | Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, Manhole, Pier Holes, etcand getting out soft/loose soil complete all as specified and directed. |
| 39 | Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm complete all as specified and directed. |
| 40 | Removal of surplus excavated soil n.exc 50m and depositing where directed at level n.exc. 1.5m above the starting point complete all as specified and directed. |
| 41 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, as in wall cladding complete all as specified and directed. |
| 42 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws as specified and directed. |
| 43 | M&LPCC (1:2:4), type C-1, (using 20mmgraded aggr) as insurface channels & drains complete all as specified and directed. |
| 44 | Extra over for forming fair finished drain or channel 30 cm inner girth incement concrete using extra cement, including forms, moulds, mitred/ stopped ends complete all as specified and directed. |
| 45 | M&L for Reinforced cement concrete with nominal mix (1:1.5:3), (using 12.5mm graded stone agregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under-reamed piles all as specified and directed. |
| 46 | M&L forReinforced cement concrete with nominal mix (1:1.5:3), ( using 12.5mm graded stone agregate) in columns, pillars, piers, posts and struts etc, all as specified and directed |
| 47 | M&L for form work to sides of concerte flat rough finished, foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter all as specified and directed. |
| 48 | M&L for Form work to sides of pillars, Posts, struts, piers, andcolumnsrough finished surfaces of square, rectangular or polygonal size all as specified and directed |
| 49 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars all as specified and directed |
| 50 | M&L reinforcement TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 complete all as specified and directed. |
| 51 | Demolition of reinforced cement concrete an any position (reinforced) all as directed |
| 52 | M&L for providing precast cement concrete PCC (1:2:4),type B1, asincover slabs for drains etcand similar articles with plane and set in CM (1:6) complete all as specified and directed. |
| 53 | S&FTMT bars 6 to 8 mm dia cut to length, bend to shape required including cranking, bending, spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 54 | Excavation of liquid soil/mud for di-silting/cleaning of area drainage not exceeding 1.5m deep and removing materials exceeding 50m but not exceeding 100m and depositing, spreading and levelling complete all as specified and directed. |
| 55 | Labour for cutting brushes, herbs and jungles incl cutting small trees grith n exc 5 cm complete all as specified and directed. |
