Sales : +91-777 804 8217
| Sl. No. | Item Title | Specification / Unit |
| 1 | Agarose gel electrophoresis apparatus with power supply pack | Suitable for serum protein separation |
| 2 | Air sampler system | • Rechargeable battery operated • Microprocessor controlled electric fan • Low battery control and alarm • Delay start • System should facilitate the use of plates of different sizes 90mm, 65mm, 75mm, etc • Total volume of sampled air programmable from 1 to 1000 liters, with 1 liter step • Preset sampling flow rate 30-60-90-120 liters • Manual sampling (for air volume >1000lit) • Sequential sampling available • The system should be supplied with at least 5 sampling grids which can be used alternatively for sampling. Also the above grids should be autoclavable for further repeated use • Instruction manual should be provided • The system should have the memory which can store at least four sampling volumes in it and which can be edited and modified as and when required.• An LCD screen should be present to program the instrument and follow its operation.• Calibration, validation and warranty certificated should be provided• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. • Should have ISI mark.• Should have good consumer base in Gujarat. • Permanent service engineer should be posted in Gujarat and attend to complaints and rectify them within 48 hours. • Comprehensive and full training of all users by suppliers for operating the equipment. • For imported item, CE certificate is must. -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 3 | Autoclave - vertical, fully automatic | • size Medium • The unit comprises of steam jacket electrically heated, inner chamber and outer cover is made of stainless steel and duly insulated with high density mineral wool from the inner chamber and fitted with stable legs. • Should works on 3-phase, 440V, A/C, 50HZ supply. • Application specific integrated chip Microprocessor controller.• Provided with RS 232 output • Fitted with pressure control switch • Fitted with low water level cut off device.• The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring lid and two safety valve of stainless steel. • Supplied with pedal lifting device. • The unit has been fitted with pressure gauge, water outlet valve and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve. • The steam generator is made out of stainless steel heavy gauge and water draining valve. • Inner drum size : 450 x 600 mm• Accessories : Timer, 2 lid sealed gasket, Autoclave indicator strip, 2 heating coils.• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. • Should have ISI mark.• Should have good consumer base in Gujarat.• It is preferable, if equipment is approved by any apex Govt. institute in India.• It is preferable, if equipment have good rapport in commercial market since last 3 year.• Permanent service engineer should be posted in Gujarat and attend to complaints and rectify them within 48 hours.• Comprehensive and full training of all users by suppliers for operating the equipment.• The company should supply the list of institution where the equipments are being used.• Authority letter from Manufacturer is mandatory.• For imported item, CE certificate is must.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 4 | Autoclave - vertical, fully automatic | • size small• The unit comprises of steam jacket electrically heated, inner chamber and outer cover is made of stainless steel and duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.• Should works on 3-phase, 440V, A/C, 50HZ supply.• Application specific integrated chip Microprocessor controller.• Provided with RS 232 output• Fitted with pressure control switch • Fitted with low water level cut off device.• The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring lid and two safety valve of stainless steel.• Supplied with pedal lifting device.• The unit has been fitted with pressure gauge, water outlet valve and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.• The steam generator is made out of stainless steel heavy gauge and water draining valve.• Inner drum size : 550 x 750 mm• Accessories : Timer, 2 lid sealed gasket, Autoclave indicator strip, 2 heating coils.• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. • Should have ISI mark.• Should have good consumer base in Gujarat.• It is preferable, if equipment is approved by any apex Govt. institute in India.• Permanent service engineer should be posted in Gujarat and attend to complaints and rectify them within 48 hours.• Comprehensive and full training of all users by suppliers for operating the equipment.• Authority letter from Manufacturer is mandatory.• For imported item, CE certificate is must. - Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 5 | Autoclave Double drum vertical (Non Microprocessor) | • The unit comprises of steam jacket electrically heated, inner chamber and outer cover is made of stainless steel and duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.• Should works on 3-phase, 440V, A/C, 50HZ supply.• Fitted with pressure control switch • The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring lid and two safety valve of stainless steel.• Supplied with pedal lifting device.• The unit should be fitted with pressure gauge, water outlet valve and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.• Inner drum size : 350 x 550 mm• Accessories : 2 gasket, 2 heating coils. - Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 6 | Autoclave Double drum vertical (Non Microprocessor) | • The unit comprises of steam jacket electrically heated, inner chamber and outer cover is made of stainless steel and duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.• Should works on 3-phase, 440V, A/C, 50HZ supply.• Fitted with pressure control switch • The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring lid and two safety valve of stainless steel.• Supplied with pedal lifting device.• The unit should be fitted with pressure gauge, water outlet valve and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.• Inner drum size : 550 x 750 mm• Accessories : 2 gasket, 2 heating coils.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 7 | Autoclave Double drum vertical (Non Microprocessor) | • The unit comprises of steam jacket electrically heated, inner chamber and outer cover is made of stainless steel and duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.• Should works on 3-phase, 440V, A/C, 50HZ supply.• Fitted with pressure control switch • The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring lid and two safety valve of stainless steel.• Supplied with pedal lifting device.• The unit should be fitted with pressure gauge, water outlet valve and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.• Inner drum size : 450 x 600 mm• Accessories : 2 gasket, 2 heating coils.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 8 | Autoclave Double drum vertical (Non Microprocessor) | • The unit comprises of steam jacket electrically heated, inner chamber and outer cover is made of stainless steel and duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.• Should works on 3-phase, 440V, A/C, 50HZ supply.• Fitted with pressure control switch • The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring lid and two safety valve of stainless steel.• Supplied with pedal lifting device.• The unit should be fitted with pressure gauge, water outlet valve and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.• Inner drum size : 400 x 600 mm• Accessories : 2 gasket, 2 heating coils.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 9 | Automated nucleic acid extraction system | • Automated Bench top nucleic acid and proteins extraction and purification device using proven technology like silica based spin column or magnetic bead separation technology. • It should have touch panel and compatible with wide range of samples such as blood, plasma, body fluids, bacteria, and FFPE (Formalin Fixed Paraffin Embeded) tissue etc.• It should be automatic and the unit should be capable to process minimum 10 samples per run.• The system should be integrated with touch-screen/ computer, should allow the user to select and run protocols, install or delete protocols, save data files.• A comprehensive load check should be performed prior to sample processing to check worktable setup and to help to ensure correct loading of the instrument. • There should be optical sensor to checks the type of filter tips loaded on the worktable and that there are sufficient tips for the protocol run.• There should be availability of compatible kits for DNA extraction/RNA extraction/DNA and RNA extraction simultaneously (Nucleic acid extraction)/Protein/ miRNA from the clinical sample.• The system should be programmable to enable modifications and customization of the protocols according to the user needs and applications and should provide future upgradation in software free of charge.• Operating temperature 18–28ºC (Room temperature).• Suitable UPS with maintenance free batteries for 1 hour backup should be supplied with the system.• CE marked/FDA approved/ISO marked. -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 10 | BacT Alert Reflectance stanadards | BacT AlertT reflectance standard of Biomeriux compatible to BacT/AlerT 3D 60 & 120. It should contain Reflectance Standard A & B |
| 11 | Battery for UPS | 26 AH, 12 Volts |
| 12 | Battery for UPS | 18 AH, 12 Volts |
| 13 | Bio safety cabinet Class II | • Class II, Type-A • Working Size 2â€x3â€x4†• HEPA Filter (Supplied with Main Unit-1 Nos.) is rated for min. 99.97 % efficiency at 0.3 micron particle size. • High efficiency (10 Microns) Pre Filter (Supplied with Main Unit-1 Nos.) • Illumination 1x20W. • Built in U.V.Germicidal Light 1x50W. • U.V. Light in work chamber inter locked with door and fluorescent light. • Stand by Mode increases filter life. • Gas Burner. 1 Nos. • Electrical Gas Cock with LED indicator (doesn’t disturb preset flow rate when shutting off gas. • Counter balanced door for effortless operation. • Door safe Position Alarm. • Electric outlet provided in the work chamber for connecting any appliances. • Whole Cabinet made of cold rolled steel sheet duly power coated inside & outside for longer life & durability. • Heavy duty exhaust system. Size-2 x 2 feet - Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 14 | Bio safety cabinet Class II | • Class II, Type-A • Working Size 2â€x4â€x6†• HEPA Filter (Supplied with Main Unit-1 Nos.) is rated for min. 99.97 % efficiency at 0.3 micron particle size. • High efficiency (10 Microns) Pre Filter (Supplied with Main Unit-1 Nos.) • Illumination 1x20W. • Built in U.V.Germicidal Light 1x50W. • U.V. Light in work chamber inter locked with door and fluorescent light. • Stand by Mode increases filter life. • Gas Burner. 1 Nos. • Electrical Gas Cock with LED indicator (doesn’t disturb preset flow rate when shutting off gas. • Counter balanced door for effortless operation. • Door safe Position Alarm. • Electric outlet provided in the work chamber for connecting any appliances. • Whole Cabinet made of cold rolled steel sheet duly power coated inside & outside for longer life & durability. • Heavy duty exhaust system. Size-2 x 2 feet -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 15 | Bio safety cabinet Class II | • Class II, Type-A• Working Size 2â€x2â€x2â€â€¢ HEPA Filter (Supplied with Main Unit-1 Nos.) is rated for min. 99.97 % efficiency at 0.3 micron particle size. • Size of HEPA Filter 2â€x2â€x 0.5â€â€¢ High efficiency (10 Microns) Pre Filter (Supplied with Main Unit-1 Nos.) • Illumination 1x20W. • Built in U.V.Germicidal Light 1x50W.• U.V. Light in work chamber inter locked with door and fluorescent light. • Stand by Mode increases filter life.• Gas Burner. 1 Nos. • Electrical Gas Cock with LED indicator (doesn’t disturb preset flow rate when shutting off gas.• Counter balanced door for effortless operation.• Door safe Position Alarm.• Electric outlet provided in the work chamber for connecting any appliances.• Whole Cabinet made of cold rolled steel sheet duly power coated inside & outside for longer life & durability.• Heavy duty exhaust system. Size-2 x 2 feet -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 16 | Biosafety Cabinet Class II (SIZE: 2 x 2 x 2 feet inner working space.) | BOD incubator of - Inner Chamber Size: 700x900x650 mm• Temperature range 5 to 50 Degree C. +/- 0.1 Degree C. • Stainless Steel Chamber. Should be S.S.304 only. • Adjustable Selves. • Powder coated body with antirust treatment • Two door are provided • Outer door is insulated and is fitted with magnetic gasket. • Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss. • B.O.D. Incubator Voltage Stabilizer • Digital Temperature Controller Cum Indicator • Digital Mains Voltage Indicator,• A safety thermostat should be provided, which switch off the heaters in the event of failure of the normal temperature control system to protect the specimens from excessive heat • Door Open Indicator lamp and with unbreakable transparent Acrylic inside door. Environment friendly (CFC free) Refrigerant. PUFF Insulated.• Calibration Certificate. • Interior Illumination with 3 Nos. fluorescent tubes of 60 cms. • Automatic Timer, Range 0-24 hours regulating illumination cycle. • Caster wheel provided at bottom for easy mobility. Accessories : Timer, 2 heating coils• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. • Should have ISI mark. • Should have good consumer base in Gujarat. • It is preferable, if equipment is approved by any apex Govt. institute in India. • It is preferable, if equipment have good rapport in commercial market since last 3 year. • Permanent service engineer should be posted in Gujarat and attend to complaints and rectify them within 48 hours. • Comprehensive and full training of all users by suppliers for operating the equipment. • The company should supply the list of institution where the equipments are being used.• Authority letter from Manufacturer is mandatory. • For imported item, CE certificate is must. - Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 17 | Biosafety Cabinet Class II (SIZE: 4 x 2 x 2 feet inner working space.) | BOD incubator of Inner Chamber Size 455x605x415 mm • Temperature range 5 to 50 Degree C. +/- 0.1 Degree C. • Stainless Steel Chamber. Should be S.S.304 only. • Adjustable Selves. • Powder coated body with antirust treatment • Two door are provided • Outer door is insulated and is fitted with magnetic gasket. • Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss. • B.O.D. Incubator Voltage Stabilizer • Digital Temperature Controller Cum Indicator • Digital Mains Voltage Indicator,• A safety thermostat should be provided, which switch off the heaters in the event of failure of the normal temperature control system to protect the specimens from excessive heat • Door Open Indicator lamp and with unbreakable transparent Acrylic inside door. Environment friendly (CFC free) Refrigerant. PUFF Insulated.• Calibration Certificate. • Interior Illumination with 3 Nos. fluorescent tubes of 60 cms. • Automatic Timer, Range 0-24 hours regulating illumination cycle. • Caster wheel provided at bottom for easy mobility. Accessories : Timer, 2 heating coils• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. • Should have ISI mark. • Should have good consumer base in Gujarat. • It is preferable, if equipment is approved by any apex Govt. institute in India. • It is preferable, if equipment have good rapport in commercial market since last 3 year. • Permanent service engineer should be posted in Gujarat and attend to complaints and rectify them within 48 hours. • Comprehensive and full training of all users by suppliers for operating the equipment. • The company should supply the list of institution where the equipments are being used.• Authority letter from Manufacturer is mandatory. • For imported item, CE certificate is must.- Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 18 | BOD incubator | BOD incubator of - Inner Chamber Size 500x825x415 mm. • Temperature range 5 to 50 Degree C. +/- 0.1 Degree C. • Stainless Steel Chamber. Should be S.S.304 only. • Adjustable Selves. • Powder coated body with antirust treatment • Two door are provided • Outer door is insulated and is fitted with magnetic gasket. • Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss. • B.O.D. Incubator Voltage Stabilizer • Digital Temperature Controller Cum Indicator • Digital Mains Voltage Indicator,• A safety thermostat should be provided, which switch off the heaters in the event of failure of the normal temperature control system to protect the specimens from excessive heat • Door Open Indicator lamp and with unbreakable transparent Acrylic inside door. Environment friendly (CFC free) Refrigerant. PUFF Insulated.• Calibration Certificate. • Interior Illumination with 3 Nos. fluorescent tubes of 60 cms. • Automatic Timer, Range 0-24 hours regulating illumination cycle. • Caster wheel provided at bottom for easy mobility. Accessories : Timer, 2 heating coils• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. • Should have ISI mark. • Should have good consumer base in Gujarat. • It is preferable, if equipment is approved by any apex Govt. institute in India. • It is preferable, if equipment have good rapport in commercial market since last 3 year. • Permanent service engineer should be posted in Gujarat and attend to complaints and rectify them within 48 hours. • Comprehensive and full training of all users by suppliers for operating the equipment. • The company should supply the list of institution where the equipments are being used.• Authority letter from Manufacturer is mandatory. • For imported item, CE certificate is must. -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 19 | BOD incubator | • Outer fiber bodyHeavy duty compressor and stainless steel inner tank• Imported themostat with PUF insulation• Ecofriendly refrigerant• Low power consumption• 2-12º C• 180-260 Walts• 160 x 65 x90 (L x W x H in cm)• Inside capacity 423 liters -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 20 | BOD incubator | Glass with 3.5 liters capacity, perforated plate in between, capacity to carry 10 plates |
| 21 | Bottle cooler 0 - 10o C | Glass with 3.5 liters capacity, perforated plate in between, capacity to carry 6 plates |
| 22 | Candle jar | Easy to operate, Mechanically jumps by every press, quick reaction zero reset knob at side 4-digit display Counting range: 0000-9999 Counting speed: 300 number / s (based on the humans reaction speed) Size: 45 mm in diameter, 35 mm in thicknessPackage Includes 1 x Manual click counter, |
| 23 | Candle jar | • Step less speed regulator.• Safety Lid interlocks to prevent cover opening during centrifugation.• Digital speed meter and 0-60 minutes digital countdown timer.• Interchangeable Head of 8 tubes.• Tube capacity: 15 ml.• Centrifuge with conformity to European safety standards.• Max. Capacity of 4000 rpm without rotor and heads.• Calibration Certificate. -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 24 | Cell counter | • Step less speed regulator.• Safety Lid interlocks to prevent cover opening during centrifugation.• Digital speed meter and 0-60 minutes digital countdown timer.• Interchangeable Head of 16 tubes.• Tube capacity: 15 ml.• Max. Capacity of 5000 rpm without rotor and heads.• Calibration Certificate.• Company should provide Good manufacturing product (GMP)/ WHO certificate & ISO certificate/FDA approved along with tender. 5 years AMC rate is provided & AMC rate should not more than 10 % of original th• Authority letter from Manufacturer is mandatory.• For imported item, CE certificate is must.Calibration certificate -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 25 | Centrifuge - 08 tubes | • Step less speed regulator.• Safety Lid interlocks to prevent cover opening during centrifugation.• Interchangeable Head of 16 tubes.• Tube capacity: 15 ml.• Max. Capacity of 5000 rpm without rotor and heads.• Calibration Certificate.• Brushless induction motor with frequency drive• Stable speed output even under unstable voltage condition• Safety lid interlock to prevent lid opening during centrifugation• Dynamic brake for quick declaration • Imbalance & Inverter fault detection with auto shutdown• Digital display of speed & time • Digital count down timer of 60 minutes • Calibration certificate -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 26 | Centrifuge - 16 tubes | • Step less speed regulator. • Safety Lid interlocks to prevent cover opening during centrifugation. • Interchangeable Head of 24 tubes.Angle Head Rotor • Tube capacity: 10ml/30X7/5ml • Max. Capacity of 5000 rpm without rotor and heads. • Calibration Certificate. • Brushless induction motor with frequency drive • Stable speed output even under unstable voltage condition • Safety lid interlock to prevent lid opening during centrifugation • Dynamic brake for quick declaration • Imbalance & Inverter fault detection with auto shutdown • Digital display of speed & time • Digital count down timer of 90 minutes ,option to decrease or increase time during operation • Calibration certificate -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 27 | Centrifuge - with brushless motor | 15 ml, Conical bottom, Sterile, with graduations, Polypropylene,Autoclavable |
| 28 | Centrifuge - with brushless motor | 170 liter, on a minimal footprint.Shelves: 4 shelves.72-hour continuous data logging of temperature, alarms, door openings and CO2, O2 and RH if required, provides a detailed record of environmental conditions to quickly troubleshoot any unexpected results.On-screen troubleshooting and help.Diagnostic interface to show system parameters and functions.4 or 8-Split inner Doors allowing outer door to open while maintaining atmosphere & minimizes cross flowCapacity to quickly change both environmental & alarm settings through intuitive controllerPassword protection for secure programmable settings and alarm set points.On-Screen troubleshooting & helpSix-sided direct heating systemFanless DesignIR CO2 sensor with automatic auto-zero programmable function to ensure accurate calibrated measurements.High temperature disinfection - 1200 C 4 hours Cycle, CO2 sensor should be present in the chamber while disinfection cycle is on.Stackable up to two high.Large volume humidification pan with dedicated, with independent heater.Seamless chamberHEPA filtration of gas supply inlets to ensure sterility.25mm Access port.RS232 communications portPerforated ShelvesLarge 5.3†(13.5cm) LCD intuitive interface with 72 hour data logging 7 easy access to set point & alarms.Range: 40 C above Ambient to 500 CUniformity: +/- 0.20 CCertification: CE--Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 29 | Centrifuge tubes with caps | Cold Room : Cold Room Outer Size: Width not less than - 7.5 feet X Depth not less than- 9.5 feet X Height not less than- 9.5 feet, Cold Room Inner Size: Width not less than - 7.0 feet X Depth not less than- 9.0 feet X Height not less than- 9.0 feet, Room Temperature : +2 Degree C to +8 Degree C, Product incoming Temp : +15 Degree C to +20 Degree C, Panel should be constructed by using prefabricated sandwich PUF panels with Cam lock & Pvc gaskets on all sides. All panels fit together by cam lock. Panel should be with grooves to increase the strength. Panel Thickness must be at least 60 mm. Panel outside pre coated GI sheet & inside SS 304 2B finish, Sheet Thickness 0.5mm. Floor should be insulated with at least 60 mm PUF Panel with outside pre coated GI sheet & Inside 9 mm marine ply for Aluminum Checkered Plate, sheet Thickness 2.0mm. Door should be of Flush type Swing Door with Heavy duty Imported Hardware like Hinges, Handle & Door closer. Door frame should be made up of Heavy duty PVC profile with inbulit heater arrangement to remove defrosting on door & Push type Gasket to stop air loss & easy operation for Long life.There should be a single door of at least 6 feet height & width should be at least 2.5 feet There should be proper lighting in each & every corner of the room, lighting should be vapour proof. There should be Pressure Relief port to balance the air pressure within the room to reduce damage of panel due to vacuumThere should be Stainless Steel Checkered Plate on bothside of Door bottom to reduce damage.There should be Safety Release Knob placed at the inner side of the door for safety precautions.There should be emergency Alarm and strip curtain |
| 30 | CO2 Incubator | 1. Microprocessor control for colony counting for determination of microbial count . 2. It should provide uniform, lighting of round or square culture dish up to 100 mm wide. 3. Viewing area is illuminated obliquely by a peripheral metal reflector. 4. Field is magnified by a 1 to 7 mm lens, mounted adjustably on panel. 5. It should provide a manual electrode which used touches to surface of culture colony at each point being counted. 6. Count is totalized automatically on a 5 digit register, reading to 99,99. 7. A rectangular pushbutton below register resets zero. 8. Training of laboratory staff for the purchased equipment9. 5 yrs comprehensive AMC should be available with service centers in close proximity 10. All consumables required for installation and standardization of system to be given free of cost.11. Should have all the accessories required for the functioning of the equipment.12. ISI mark or other equivalent quality certification. 13. There should be provision for demonstration before final approval of equipment |
| 31 | Cold Room with refrigeration system | • Sample Volume: 0.5 to 1 ml• Cycle Duration: 1-99 min• Adjustable Sash• Samples/Run: 24• Number of Cytofunnels: 12• Warnings: Lid Lock, Over speed, Imbalance, End of run• Revolution: Max speed of 100• Sealed Head• Operating Temp: +5 C to +45 C• Clear, Spill proof LCD Display• Spill proof Keypad• Should have >20 Programmable memory • Must be US FDA approved• Sample Volume Range :• 1-well Cell Concentrator 300 to 800 µL• 3-well Cell Concentrator 50 to 200 µL• 3-well Concentrator permits application of• different samples, different concentrations or• controls on the same slide.• Reuse capability reduces operating costs.• Autoclavable version -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 32 | Colony counter- Digital | minus 20 degree Centigrade "• Vertical model with 3 – 6 stainless steel storing shelves• Capacity : 350 – 400 Liter (5 – 15 cubic feet)• Under voltage & over voltage protection with audiovisual alarm• Built in voltage stabilizer• Digital display temperature, with racks & boxes (2 x 3 feet) cardboard / polycarbonate.• Air circulation fan is fitted to unit so as to maintain uniform temperature throughout the chamber.• The gap between inner & outer wall is fitted with high grade mineral glass wool to avoid thermal loss. • Body is mounted on a sturdy angle iron-frame & is mounted on castor wheels. • Should have more than 100mm PUF insulation • Should have CE mark, Heavy duty castor wheels and 24 hours backup for Chart Recorder--Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 33 | Cytospin Centrifuge | • Operating temperature range should be from –40oC to -80 oC at ambient temperature of 32 oC. & system should be vertical standing and should have working volume of minimum 300 liters to store plasma in controlled temperature. • System should be microprocessor controlled with o Digital display of all functions.• System should have inbuilt features to identify any temperature deviation beyond alarm set point, to show the error that has occurred and to display if it had been auto-c corrected.• System should have key operated switch for main power and alarm system & system should have operating temperature & high /low limit alarm functions with set point adjustable in steps of 1 oC.• The system should have control fan cooling system for maintaining internal temperature uniformly and constant at all shelf levels, with quick recovery.• System should have four - five inner stainless steel doors with independent door hinges and magnetic latches and four to five height adjustable stainless steel shelves.• System should have CFC free refrigerants.• System should be made of high-grade steel with rounded corners in the interior for easy cleaning & system should have down-feed evaporator for efficient refrigerant flow.• System should have washable condenser filter to maintain peak cooling efficiency. It should also have indicator for advising removal and cleaning of dirty filters.• System should have automatic voltage boost compensations for low voltage conditions.• System should have adjustable safety alarms with automatic, continuous charged 24 hours battery back-up to provide alarm functions even in case of power failure.• System should have exterior alarm contacts for connection to remote monitoring system.• System should have minimum >10 inches thick foamed-in-place urethane insulation & system should have inventory systems like racks, boxes and dividers.• System should offer positive closure to assure tight seal against double independent door gaskets to minimize frost build-up with key lock security.• System should have optional temperature recorders, LN2/CO2 back-up systems, calibration certificates and associated products.• System should have weekly chart recorder and digital display. The display resolution should be accurate to 0.1° c.• After sales service should be available locally. Should have CE Mark -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 34 | Deep freeze (-20oC) | 230, volts, 50/60 Hz, 1 block, should heat upto 100°C, stability should be +/- 3°C, uniformaity across the block +/- 0.6°C. |
| 35 | Deep Freezer (-80oC) | without flame, electrical sterilization system with temperature indicating controller for inoculation loops, wires, needles, Fit for use inside Biosafety cabinets |
| 36 | Dry block heater | for casting tray of 15 x 10 cms,for horizontal gel electrophoresis |
| 37 | Electric loop steriliser | •Electronic Needle/syringe Destroyer –should destroy all kinds and sizes of injection needles•Hardened blades to cut plastic syringes easily.•Safe and shock proof•Compact and portable•Easy to operate |
| 38 | Electrode set | Battery operated, Handy, Digital Display. Count Down with Signal and Repitition. Stopwatch & Clock-Timer Facility, Hr-Min-Sec Adjustable, Set + Reset Key |
| 39 | Electronic Needle/syringe Destroyer | 0.0001 gm – 210 gm, accuracy 0.0001 gm -weighing should be fast, accurate & reliable-easy to operate-Compact Design-Double LCD display -Tare, Zero, Gross & Net facilities -Automatic calibration, rapid update & response time-Rugged injected molded construction- Stainless steel weighing pan, overload protection, Battery backup inbuilt, Percentage weighing, -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 40 | Electronic Timer for Laboratory | Electronic weight scale with digital display for speceimen-0.1gm to 2000gmPrecalibrated.Standard weights should be provided for standardization -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 41 | Electronic Weighing Machine | 7 x 7 cms |
| 42 | Electronic Weight Balance , 0.1gm to 2000gm | 15 x 10 cms |
| 43 | Electrophoresis Gel casting tray | should be able to run 2 units with max output of 300 volts, 400 mAmp, 80 watts |
| 44 | Electrophoresis Gel casting tray | • Should have a capacity to read 96 well microplate and strip broth.• Linear Measurement Range : 0.00 to 3.0 OD Absorption Units• Light source : Tungsten lamp/ Halogen long life with lamp saving facility 20 W• Warm up time : 45 seconds• LCD display• Key board : User friendly Keyboard• Filter- minimum 8 filters with filter scanning facilities with compulsory 405 nm-450 nm-630 nm• Should have Bichromatic option• Mixing time – programmable• Memory 80 tests minimum with battery supported RAM• Calculation Mode : Single point calibration and multi point calibration with regression or point to point curve fit. Cut off absorbance uptake.• Automatic interpretation of result (not only absorption)• Flags and Error message• RS-232 port for computer and upgradable • Multiple test on same plate• Multiple blank option• Instrument should be stand alone without computer• Should read and print results of 96 wells in less than 3 minutes• Flages and error massages• Partial plate reading• Alpha neumaric test memory• Automatic interpretation• Duplicate option• Contol locator• Self check system• Curve plotting and editing• Accuracy 2.5 % at 0.15 OD , 1.5% at 1.0 OD, !.5 % at 2.5 OD• Precision : + 1.5 %• Fuse : 110 V• Reading time- single wavelength < 3 sec , dual wavelength < 10 sec • Inbuilt printer or should supply separate printer -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 45 | Electrophoresis Power supply unit | • Wash , flat , round and V bottom based microplate• Memory 50 users enter wash protocols• Should have aspiration , dispense, soak and shake programme• Should have automated alignment and last row detection• Programmable automatic rinse cycle• 8 way wash head • residual volume less than 3 µl• dispense accuracy less than 3% CV at 30 µl• processing time for full plate : 55 second aspirate with single or double aspirate• nonvolatile memory : battery supported RAM holds approximately 50 wash protocols• Washing program : aspirate, dispense, mix , soak • Special Menu options : autoalignment –senses physical geometry of the head, plate and carrier mechanism• Stand by mod disable pumps and releases vaccume and pressure• Bottles: wash and waste 2 litres , rinse 1 litre with plastic with volume sensor probe • 2 bottle with tubing extra for each -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 46 | ELISA plate reader | Epson LX 300-II, Dot Matrix Printer( 9 Pin 80 Column) |
| 47 | ELISA plate washer | 450 mm |
| 48 | ELISA printer | 620 mm |
| 49 | Filter for ELISA reader | 492 mm |
| 50 | Filter for ELISA reader | 8 well and 15 well |
| 51 | Filter for ELISA reader | • Gel doc system should have following specifications:• Maximum sample size: 28*36 cm• Maximum image area: 25*26 cm,• It should have Trans UV 302, 254, 365 nm and white, Epi-white light as an excitation source• It should have 3 Illumination Modes: Trans UV, White, Epi-White• It should have CCD detector with Resolution of 1360(H) * 1024(V), Pixel size (in Microns) 4.65 (H)* 4.65(V)• It should contain 3 filter holders: 3 positions, 2 Emission Filter and 1 Chemi.• Emission Filters: 1 included (amber), 4 optional• Dynamic Range: 3.0 Orders• Pixel Density with 4096 gray levels• It should include FireWire port to communicate with the computer.• It should include computer with compatible operating system, with application drives.• Operating Ranges:• Operating Voltage: 100/115/230 VAC• Operating Temperature: 10-280C• Operating Humidity: <70% non-condensing-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 52 | Gel Comb set | Should provide Gel casting tray 15 x 10cms, Gel casting stand, buffer chamber, safety lid with cables and UV transparent tray, 1.5 mm thick 8 and 15 mm comb |
| 53 | Gel doc | • ISI Mark.• Temperature range ambient up to 250 Degree C. +/- 1 Degree C.• Digital Display cum Controller.• Mammert type• Digital imported thermostatic control & fitted with an automatic electric cut out• Accessories : Timer, 2 heating coils.• Air Circulating Fan.• Calibration Certificate.• Stainless Steel Chamber. Should be S.S.304 only.• Powder coated body.• Adjustable Selves.Chamber Size: 355†x 355†x 355â€mm -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 54 | Heating Block or DRY Bath Incubator | Digital display, ISI Mark, Temperature Range: +5 to 100°C, Minimum Dimensions: 8†x 9†x 4.5†(W X L X H) |
| 55 | Heating Block or DRY Bath Incubator | • ISI Mark.• Temperature range ambient up to 80 Degree C. +/- 0.1 Degree C.• Digital Display cum Controller.• Air Circulating Fan.• Mammert type• Calibration Certificate.• Stainless Steel Chamber. Should be S.S.304 only.• Powder coated body.• Glass Door.• Door gasket made of synthetic rubber compound.• Adjustable Selves.• Adjustable overshoot alarm & heater cut off.• In-built soft start for heaters prolongs heater life.• Feather touch button.Chamber Size: 655†x 655†x 655â€mm -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 56 | Horizontal Gel electrophoresis Unit | • ISI Mark.• Temperature range ambient up to 80 Degree C. +/- 0.1 Degree C.• Digital Display cum Controller.• Air Circulating Fan.• Mammert type• Calibration Certificate.• Stainless Steel Chamber. Should be S.S.304 only.• Powder coated body.• Glass Door.• Door gasket made of synthetic rubber compound.• Adjustable Selves.• Adjustable overshoot alarm & heater cut off.• In-built soft start for heaters prolongs heater life.• Feather touch button.Chamber Size: 355†x 355†x 355â€mm -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 57 | Hot air Oven | • Durable Construction• Water temperature controlled by digital immersion• All moving parts can be easily removed for servicing• Constant level device ensures constant water level despite evaporation losses• Batches of tubes are quickly and easily set out and collected from the tray Optional Accessories: • Water Level Indicator• Digital Timer• Strirrer• Automatic Low Water Level cut Trays S.S-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 58 | Hot Plate With Thermostat | • The biological safety cabinet shall be of Class ll A/B3 classification suitable for use in microbiology applications in safety categories 1 through 3, and be designed in compliance with international standards.• The safety cabinet must feature an aerosol tight, electrically driven front window made of laminated safety glass, which seals the inner chamber.• It should be a negative pressure encapsulated system.• The cabinet shall incorporate HEPA filters for supply and exhaust air, providing efficiency of 99.999% for 0.3 micron particles.• System should have a safety feature, which ensures that UV light is on only when the front window is fully closed.• The safety cabinet must feature transparent laminated safety glass side window panels.• The cabinet should incorporate a non-reflecting lacquer coated rear chamber wall rather than stainless steel.• The cabinet must offer removable, autoclavable arm rests to prevent front air ducts from becoming obstructed during operation by a user’s arms.• The cabinet must not exceed 83†in height when positioned upon an accessory support stand.• The cabinet must feature both visual and audible alarm functions to indicate discrepancies in operating conditions relative to the parameters of inflow and down flow air movement and window placement.• The safety cabinet must be designed such that the supply filter is protected from potential damage via accidentally excessive mechanical force inside the work area.• The cabinet must not incorporate air ducts in the sides of the chamber interior.• The cabinet design must be such that all service, re-certification and filter changes may be conveniently accomplished from the front of the safety cabinet so that shifting of the cabinet is not required while servicing.• After sales service should be available locally.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 59 | Incubator - Stainless steel(Microprocessor and digital display) | • Screen Size - 4 meters diagonally• Aspect Ratio - 4:3• Computer Compatibility - VGA /SVGA/ XGA/ SXGA• Video Compatibility- PAL/SECAM/ NTSC• Projection Lamp - UHP/ METALHALIDE / NSH – LAMP. • Lamp Life - 2000hrs Minimum • Brightness- 2000ANSI Lumens or higher• Throw Distance (Range) - Should cover 2 meters-5 meters from screen• Audio System Minimum - 1.0 watt RMS with built-in speaker• Zoom !Focusing - Lens Zoom 1:1.2 or higher, Motorized Zoom & Focus (Controlled• by a Remote)• Remote Control - Remote control unit for PC and Mouse with inbuilt laser pointer• Terminals ports with connectors (Input/output) - Video IN, S Video IN, RGBIN, Audio IN, RGBOUT,• connectivity for remote mouse (to be specified by bidder)• Contrast Ratio - 260: I or higher• PCMCIA card slot with card - Yes .• Native resolution - 1024x768Color Pixels Minimum• Intelligent resizing - I280xl024• Key stone/Lens shift - Digital• Packing - Hard case high Impact, durable case for LCD Projectors• Accessories - Standard accessories, power cord, RGB cable, Video Audio• Cable, Component Cable PS/2 mouse cable, remote controller• Standard - It should confirm to Indian Standard /relevant latest International• Standard. After sales service and support at site on all India basis |
| 60 | Incubator - Stainless steel-(Microprocessor and digital display) | Container shouldbe compact, light weight, double walled vacuum insulated aluminumvessel, polyurethane coated. • Secure locking arrangements to be provided. •Capacity: 35-75L • Static evaporation rate: = 0.15 litre/day (Minimum is preferable) • Static holding time: = 80 days • Should provide suitable canister/ racks & boxes for storage of 1.8 – 2.0 ml cryovials. •Should have ISI /CE or equivalent certification • Should provide measuring rod to determine & monitor LN2 level •Preferable with Advanced Temperature Monitor & alarms for same, automated fill and level monitoring •Following items should be provided 1. Cryo gloves 2.Gum boots 3. Roller base / Trolley for easy transport •Warranty of the instrument:At least 24 months from the date of successful installation. |
| 61 | Inspissator | Container should be compact, light weight, double walled vacuum insulated aluminum vessel,polyurethane coated, with narrow mouth opening that minimizes liquid nitrogen loss. •Secure locking arrangements to be provided.•Capacity: 35-75L •Static evaporation rate: = 0.3 litre/day (Minimum is preferable) • Static holding time: = 80 days • ISI / CE or equivalent certification •Following items should be provided1. Cryo gloves 2.Gum boots3. Roller base / Trolley for easy transport •Warranty of the instrument: At least 24 months from the date of successful installation. |
| 62 | Laminar air flow cabinet | It should be made up of PTFE/ ALNICO V MAGNET material,size: 30 cm length |
| 63 | LCD projector | Mini Device, Noiseless operation, Low rotation, Variable Low Speed, 220 V AC |
| 64 | Liquid Nitrogen Storage Container | Heat resistant handle compatible to any size of loop or wire, 8 no. / pack |
| 65 | Liquid Nitrogen Transport Container | 8 place rotor for 1.5 ml tubes and 4 place rotor for 8X0.2 ml tube strips and 8 adaptors for 0.5 ml and 0.4 ml tubes. |
| 66 | Low Voltage Halogen Lamp for 7300 rRT PCR machine | For centrifugation of 6x1.5 ml tubes,should provide spare rotor for 12 x 0.5 ml tube |
| 67 | Low Voltage Halogen Lamp for 7500 rRT PCR machine | For centrifugation of 6 x 1.5 ml tubes,should provide spare 2 place rotor for 8 x 0.2 ml tube strips, Fixed speed of 6000rpm |
| 68 | Magnatic Stand for RNA Extraction | Autocalvable, with tip ejector - 50 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 69 | Magnetic Retreiver | Autocalvable, with tip ejector - 25microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 70 | Magnetic Stirrer / Cyclomixer | Autocalvable, with tip ejector - 20 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 71 | Metal loop holder | Autocalvable, with tip ejector - 100 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 72 | Microcentrifuge | Autocalvable, with tip ejector - 200 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 73 | Microcentrifuge | Autocalvable, with tip ejector - 500 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 74 | Microcentrifuge | Autocalvable, with tip ejector - 1000 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 75 | Micropipette - fixed volume | Autocalvable, with tip ejector - 5 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 76 | Micropipette - fixed volume | 0.1 - 2.5 microlitre • single channel, with tip ejector •Type of tip cone:Microtip • Fully autoclavable and UV resistant without need to dismantle the pipette before autoclaving. • No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance . Thermo Scientific / Eppendorf/ Nichiryo |
| 77 | Micropipette - fixed volume | 50 - 300 microlitre • 8 channel • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 78 | Micropipette - fixed volume | 01 - 10 microlitre • 8 channel • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 79 | Micropipette - fixed volume | 30 - 300 microlitre • 8 channel • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 80 | Micropipette - fixed volume | 10 - 100 microlitre • 8 channel , , with tip ejector• Fully autoclavable without need to dismantle the pipette before autoclaving. • No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance . •Thermo Scientific / Eppendorf/ Nichiryo |
| 81 | Micropipette - fixed volume | 20 - 200 microlitre • 8 channel, , with tip ejector • Fully autoclavable without need to dismantle the pipette before autoclaving. • No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance . •Thermo Scientific / Eppendorf/ Nichiryo |
| 82 | Micropipette - fixed volume | 5 - 50 microlitre • 8 channel , with tip ejector • Fully autoclavable without need to dismantle the pipette before autoclaving. • Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance . •Thermo Scientific / Eppendorf/ Nichiryo |
| 83 | Micropipette - single channel, variable volume, 0.1-2.5microlitre | 2 - 10 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 84 | Micropipette - variable volume, multichannel | 5 - 50 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 85 | Micropipette - variable volume, multichannel | 20 - 200 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 86 | Micropipette - variable volume, multichannel | 10 - 100 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 87 | Micropipette - variable volume, multichannel 10 - 100 microlitre | 200 - 1000 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 88 | Micropipette - variable volume, multichannel 20 - 200 microlitre | 2 - 20 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• Color d volume range for easy identification• Automatic locking of set volume• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 89 | Micropipette - variable volume, multichannel 5 - 50 microlitre | 0.5-50 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button.• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• Color d volume range for easy identification• Automatic locking of set volume• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance. •Thermo Scientific / Eppendorf/ Nichiryo |
| 90 | Micropipette - variable volume, single channel | 50 - 300 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• Color d volume range for easy identification• Automatic locking of set volume• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance. •Thermo Scientific / Eppendorf/ Nichiryo |
| 91 | Micropipette - variable volume, single channel | 0.2-2 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 92 | Micropipette - variable volume, single channel | 0.5-5 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting. • Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 93 | Micropipette - variable volume, single channel | 100-1000 microlitre • Fully autoclavable without need to dismantle the pipette before autoclaving. • Provision to avoid accidental volume change with rotating pipette hat on the pipetting button• Light weight & ergonomics design for user comfort• No sharp edges to tear gloves• Soft touch tip ejection• One handed operation for safe handling of potentially infectious materials• Super blow out for microorganisms volume pipetting.• Easy in laboratory recalibration & maintenance •Thermo Scientific / Eppendorf/ Nichiryo |
| 94 | Micropipette - variable volume, single channel | 50-1000 microliter. Light weight & ergonomic design for user comfort, no sharp edges to tear gloves, soft touch tips |
| 95 | Micropipette - variable volume, single channel | 500-5000 microliter. Light weight & ergonomic design for user comfort, no sharp edges to tear gloves, soft touch tips |
| 96 | Micropipette - variable volume, single channel | • 30 / 45 degree inclined head• Electronically operated• Interpupillary adjustment range : 48 – 75 mm• Coaxial coarse / fine knobs with tension adjustment under right side.• Fine focus knob graduated,• Reverse mounted quadruple ball bearing nosepiece & rubber grip turret• ABBE condenser NA 1.25 (oil immersion) with aperture iris diaphragm & blue filter• Built in 12V, 35W illuminator with intensity control, 2000 hours led lamp• Input voltage : 100 V – 240 V• Dust cover & mirror unit - planoconcave • Objectives :Infinity corrected DIN colou d & marked Achromatic set, temper resistant objective sleeves. 4x (W.D. 26.20mm), 10x (W.D. 7.8mm), 40x (W.D. 0.31mm), 100x oil (W.D. 0.1mm) ( Fungus resistant)• Eyepiece 10X / 15X• Accessories : Extra bulb, wooden storage box, wire pointer, filter holder, dark field stop, filar micrometer |
| 97 | Micropipette - variable volume, single channel | • 30 / 45 degree inclined head• Electronically operated• Interpupillary adjustment range : 48 – 75 mm• Coaxial coarse / fine knobs with tension adjustment under right side.• Fine focus knob graduated,• Reverse mounted quadruple ball bearing nosepiece & rubber grip turret• ABBE condenser NA 1.25 (oil immersion) with aperture iris diaphragm & blue filter• Built in 12V, 35W illuminator with intensity control, 2000 hours led lamp• Input voltage : 100 V – 240 V• Dust cover & mirror unit - planoconcave • Objectives :Infinity corrected DIN colou d & marked Achromatic set, temper resistant objective sleeves. 4x (W.D. 26.20mm), 10x (W.D. 7.8mm), 40x (W.D. 0.31mm), 100x oil (W.D. 0.1mm) ( Fungus resistant)• Eyepiece 10X / 15X• Accessories : Extra bulb, wooden storage box, wire pointer, filter holder, dark field stop, filar micrometer |
| 98 | Micropipette - variable volume, single channel | • 30 / 45 degree inclined head• Electronically operated• Coaxial coarse / fine knobs with tension adjustment under right side.• Fine focus knob graduated,• Reverse mounted quadruple ball bearing nosepiece & rubber grip turret• ABBE condenser NA 1.25 (oil immersion) with aperture iris diaphragm & blue filterCondenser & stop for dark ground illumination• Built in 12V, 35W illuminator with intensity control, 2000 hours led lamp• Input voltage : 100 V – 240 V• Dust cover & mirror unit - planoconcave • Objectives :Infinity corrected DIN colou d & marked Achromatic set, temper resistant objective sleeves. 4x (W.D. 26.20mm), 10x (W.D. 7.8mm), 40x (W.D. 0.31mm), 100x oil (W.D. 0.1mm) ( Fungus resistant)• Eyepiece 10X / 15X• Accessories : Extra bulb, wooden storage box, wire pointer, filter holder, dark field stop, filar micrometer |
| 99 | Micropipette - variable volume, single channel | 10X WIDEFIELD WITH POINTER |
| 100 | Micropipette - variable volume, single channel | 10X ACHROMAT, SPRING LOADED, WIDE FIELD, , LABOMED, LABOVISION, LABOSCOPE, OLYMPUS, VISION2000, MEDLINE,BIOPLAN |
| 101 | Micropipette-variable volume, single channel | 20X ACHROMAT, SPRING LOADED, WIDE FIELD, , LABOMED, LABOVISION, LABOSCOPE, OLYMPUS, VISION2000, MEDLINE,BIOPLAN |
| 102 | Micropipette-variable volume, single channel | 40X ACHROMAT, SPRING LOADED, WIDE FIELD, , LABOMED, LABOVISION, LABOSCOPE, OLYMPUS, VISION2000, MEDLINE,BIOPLAN |
| 103 | Microscope - Binocular | 100X ACHROMAT, SPRING LOADED, WIDE FIELD, , LABOMED, LABOVISION, LABOSCOPE, OLYMPUS, VISION2000, MEDLINE,BIOPLAN |
| 104 | Microscope - Binocular, with dark ground attachment | Optics : Color corrected infinity opticsParfocal Distance : 45 mmTube Length : 180mmKohler Illumination : Fixed Kohler and Full KohlerMagnification Objectives : Plan Achromat 4X, 10X, 40X and 100X Oil Immersion. All optics Should be anti fungus treatedEyepiece : 10X (FOV 20mm) with Sidentopf tube of upper and lower position and adjustable interpupillary distance and 30mm viewing angle. Trinocular phototube with 50:50 light distribution (Vis:Doc)Nosepiece : Inclined backward with 4 objective positionsIllumination : 30W Halogen or LED (3W/6V)Stage : Stage for both option of right and left hand drive |
| 105 | Microscope - Monocular | Autoclavable - 96 holes, plastic |
| 106 | MICROSCOPE- EYEPIECE LENS | • Heavy duty compressor • Painted GI inside• Imported themostat with PUF insulation• Ecofriendly refrigerant• Low power consumption• 2-12º C• 180-260 Walts• 160 x 65 x90 (L x W x H in cm)• Inside capacity 450 liters |
| 107 | MICROSCOPe- OBJECTIVE LENS | Mini centrifuge for PCR tube strips and PCR tubes, should have RPM speed up to 6000- 8000, should accommodate 2 strips (1* 8 wells of 0.2ml optical tubes) of PCR , should provide spare rotor for centrifugation of 6X1.5 ml tubes. Quiet and reliable, small foot print , Independent ON/OFF switch., With Lid, It should be electrically operated |
| 108 | MICROSCOPe- OBJECTIVE LENS | Mini cooler -20 degree centigrade should be with gel filled cover for maintaining -20*C temperature for up to two hours and having capacity of 32 Eppendorf tubes of 1.5 ml capacity each. It should be made up of PC / Non toxic gel, with lid. |
| 109 | MICROSCOPe- OBJECTIVE LENS | Mini cooler minus 20 degree centigrade should be without gel filled cover for maintaining -20*C temperature for up to two hours and having capacity of 32 Eppendorf tubes of 1.5 ml capacity each, made of PC/Non toxic gel material, with lid. |
| 110 | MICROSCOPe- OBJECTIVE LENS | Mini cooler minus 20 degree centigrade should be without gel filled cover for maintaining -20*C temperature for up to two hours and having capacity of 12 Eppendorf tubes of 1.5 ml capacity each, made of PC/Non toxic gel material, with lid. |
| 111 | Microscope- Trinocular | Mini cooler minus 20 degree centigrade should be without gel filled cover for maintaining -20*C temperature for up to two hours and the aluminum block having capacity of 96 wells for PCR tubes , strips or plate having capacity of 0.2 ml each well, made of PC/Non toxic gel material, with lid. |
| 112 | Microtip holder rack | Mini cooler zero degree centigrade should be without gel filled cover for maintaining 0*C temperature for up to two hours and having capacity of 12 Eppendorf tubes of 1.5 ml, made of PC/Non toxic gel material, with lid. |
| 113 | Milk cooler | Mini cooler zero degree centigrade should be without gel filled cover for maintaining 0*C temperature for up to two hours and having capacity of 32 wells for 1.5 ml Eppendorf, made of PC/Non toxic gel material, with lid. |
| 114 | Mini centrifuge for PCR tube strips | Mini cooler zero degree centigrade should be with gel filled cover for maintaining 0*C temperature for up to two hours and having capacity of 32 wells for 1.5 ml Eppendorf, made of PC/Non toxic gel material, with lid. |
| 115 | Mini cooler minus 20 degree centigrade | Multipurpose Refrigerated Centrifuge with autoclavable, non corrosive and chemically resistant metallic rotors for 30 tubes of 1.5-2 ml size tubes•6 × 85 Rotor with adaptors for 15/50 ml tubes•4 × 250 ml Rotor with adaptors’ for 15 and 50 ml tubes•4×250 ml Rotor with adaptors for 15 and 50 ml tubes along with plates adapters for cell culture•ELISA,PCR, DNA Sequencer Extraction kit.•Features automatic rotor recognition and stores up to 35 programs •Temperature range: -9°C to 40°C•Maximum speed : 14000 rpm•Slow acceleration and deceleration for handling of sensitive samples•Fast Temp. for achieving required temperature in shortest possible time•Rotor chamber with outlet vent to remove condensed water•IVD Approved. |
| 116 | Mini cooler minus 20 degree centigrade | Destroys all kinds and sizes of injection needlesHardened blades to cut plastic syringes Easily.Safe and shock proofMinimal aerosol production Most economicalCompact and portable Easy to operateAs per current Biomedical waste management rulesThe box in which the cut needle is stored the color coding as per current BMW rules and puncture proof, leak proof and autolockable before final disposable |
| 117 | Mini cooler minus 20 degree centigrade | For 96 well PCR strips and 0.2ml PCR tubesPrinciple of dry incubation technologyCools at zero degree for more than an hour after two hour precoolingat minus 20 degree centigradeshould show temperature indicator in colorsshould be stackable |
| 118 | Mini cooler minus 20 degree centigrade | PCR cooler zero degree centigrade, Capacity 96 wells for 0.2 ml and 0.5ml PCR tubes, without cover, made of PC/Non toxic gel material, with lid. |
| 119 | Mini cooler zero degree centigrade | PCR tube rack having 96 wells, autoclavable without cover , made up of polypropylene material and it should accommodate 0.2 ml tubes, strips or plate. |
| 120 | Photoelectric Colorimeter. | Digital LED Display of Abs / OD / Transmittance, 8 Optical Filters in 400-700 nm wavelength Photometric range 0 - 3 A Standard Optical Glass Cuvette and Micro-Cuvette holder device to also read 0.5 ml reaction mixture. Extra 6 Std. Cuvettes and 1 Microcuvette Holder with 6 Microcuvettes. 220V AC |
| 121 | Mini cooler zero degree centigrade | PCR tube rack having 96 wells, autoclavable with cover polypropylene rack for 0.2 ml PCR tubes , stripes and plates. This rack is stackable with or without Lid |
| 122 | Mini cooler zero degree centigrade | Containing 96 wells for 0.2 ml PCR tubes and 24 wells for 2 ml eppendorf tubes and 16 wells for 0.5 ml PCR tubes |
| 123 | Multipurpose Refrigerated Centrifuge | It should provide easy access and storage for 04 pipettes of varying sizes. Made of light, easy-to-clean plastic, |
| 124 | Needle/syringe Destroyer - Electronic | Plastic slide box for preservation of slide having capacity for 100 slide. The box should be made up of durable plastic |
| 125 | PCR Cooler | Portable digital pH meter that should measure range of pH from 0 to 14 pH with accuracy + 0.01, Pen type |
| 126 | PCR cooler zero degree centigrade | •Refrigerated Bench top Microcentrifuge having fixed angle rotor, capacity 24-32 tubes of 1.5 / 2ml , Max Speed 15000rpm, metallic Rotor with aerosol resistant lid.•Temperature Range from -10 to +40 deg.C •Fast Temp Function for quick pre- cooling of the centrifuge ( from 21 deg. C to minus 4 deg. C.) •Condensate Drain prevents the accumulation of water in the chamber of centrifuge•Dynamic compressor control system with ECO Shut off function which should optimize the cooling performance and extended compressor life •Acceleration time and decelaration time should be less than 15 seconds •Timer 30 Seconds to 9:59 h , with continuous mode •Noise level < 58 dba •Power Requirement – 350 W , 250 Volts, 50-60Hz •CE/ ISO/ FDA/ IVD Approved. -Suitable stabilizer•Digital display ofspeed, time & temperature and should be programmable. •Suitable stabilizer •Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 127 | PCR tube rack | • Refrigerated Bench top Microcentrifuge with rotors having maximum speed of 18000rpm, Rotor with lid.• This microcentrifuge must be supplied with these accessories 1. metallic Rotor with 2 places for microtitre plates 2. Rotor 8 places free swinging for 50 ml falcon tubes, 3. Rotor with 4 x 15 ml tubes.• Temperature Range from -10 to +40 deg.C •Fast Temp Function for quick pre- cooling of the centrifuge ( from 21 deg. C to minus 4 deg. C in only 8 minutes ) •Condensate Drain prevents the accumulation of water in the chamber of centrifuge•Dynamic compressor control system with ECO Shut off function which should optimize the cooling performance and extended compressor life •Acceleration time to max RPM 15 seconds.•Brake time form max. RPM 16 seconds.•Timer 30 Seconds to 9:59 h , with continuous mode.•Noise level 48 dB -Power Requirment – 350 W •IVD Approved. -Suitable stabilizer•Digital display of time & RPM. -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 128 | PCR tube rack with cover | 4 - 8 degrees,400 - 450 litre |
| 129 | PCR work station | 4 - 8 degrees,250 - 350 litre |
| 130 | Pipette Stand | • Vertical, 2-8°C, capacity not less than 400 litres • Should have CFC free refrigerant with maximum temperature uniformity.• Should have fully extendable drawers • Should have convertible freezer • Positive latch with key lock security.• Should have digital display of temperature. • Should have warranty of the instrument for 24 months from the date of successful installation. • Should have CE marked/ISO marked |
| 131 | Plastic slide box | Fixed angle, 30 place for 1.5/2.0 ml tubes, maximum speed 14000 rpm with aerosol tight lid, compatible with Eppendorf Refrigerated Centrifuge |
| 132 | Portable pH meter – pen type | Aerosol tight lid for fixed angle rotor of 30 place for 1.5/2.0 ml tubes, compatible with Eppendorf Refrigerated Centrifuge |
| 133 | Refrigerated Bench top Microcentrifuge, capacity 24-32 tubes | Made of propylene material which are environmental friendly and release less toxic gases upon incineration.Red colour coded to warn for content for hazardous materials.Permanent sealing covers after the container is full.Indicator for maximum fill volume.USFDA approved sharp containersNeedle removal grooves on the cover for easy removal |
| 134 | Refrigerated Bench top Microcentrifuge with rotors | Made: Silicated Glass, capacity 50 ml |
| 135 | Refrigerator - Double door, frost free | Spirit lamp aluminum sheet die pressed capacity 125 ml |
| 136 | Refrigerator - single door, frost free | Staining bottle rack made up of durable plastic having height of 3 inch with hole diameter of 2 inch and the rack should have a capacity of 8 bottle |
| 137 | Refrigerator -Convertible | 1.5 feet X 3 feet, Height 3 feet, with wheel |
| 138 | Rotor for Refrigerated Centrifuge | Digital pH meter having combined electrode that should measure range of pH from 0 to 14 pH with of accuracy of + 0.01, electrically operated, tabletop. |
| 139 | Rotor lid for Refrigerated Centrifuge | Digital non-contact type tachometer should display 5 digits, sampling time 1-5 Seconds, autoranging,5-999.9 to 1000-99999, accuracy - 0.5 =/- digit, Memory - last value , minimum & maximum value, detecting distance 50 to 500mm, with all accessories-Carrying case, Instruction Manual, surface speed Test Wheel, RPM adapter (cone),RPM adapter (funnel) |
| 140 | SHARP CONTAINER | Digital non-contact type tachometer should display 5 digits, Sampling time 1-5 Seconds, autoranging,5-999.9 to 1000-99999, accuracy - 0.5 =/- digit, Memory - last value , minimum & maximum value,detecting distance 50 to 500mm, with all accessories-Carrying case, Instruction Manual, surface speed Test Wheel, RPM adapter (cone),RPM adapter (funnel)-Tachometer must be calibrated,from NABL accredited lab or National Physical Lab |
| 141 | Spirit lamp glass,50 ml | Plastic Test tube rack made up of durable plastic having 5 x 10 hole for supports of 1 inch diameter test tubes |
| 142 | Spirit lamp, Aluminum | Thermometer- Alcohol liquid in glass Minus 50 degree to 50 degree |
| 143 | Stabiliser | Thermo meter - Alcohol liquid in glass Minus 20 degree to 10 degree |
| 144 | Stabiliser | Thermo meter - Minus 50 degree to 50 degree , Digital |
| 145 | Stabiliser | Thermo meter - 0 degree to 100 degree , digital |
| 146 | Stabiliser | Thermo meter - Minus 100 degree to 50 degree , Digital |
| 147 | Staining bottle rack - plastic | Thermo meter - Minus 50 degree to 50 degree , Digital, calibrated, by NABL accredited lab or National Physical Lab |
| 148 | Steel Trolley | Thermo meter - Minus 20 degree to 10 degree , Digital, calibrated,by NABL accredited lab or National Physical Lab |
| 149 | Table top pH meter - digital with combined electrode | Thermo meter - 0 degree to 100 degree, Digital, calibrated, by NABL accredited lab or National Physical Lab |
| 150 | Tachometer | Thermo meter - 0 degree to 250 degree , Digital, calibrated, by NABL accredited lab or National Physical Lab |
| 151 | Tachometer- Digital- Non Contact type- Calibrated | Thermo meter - Alcohol liquid in glass Minus 20 degree to 10 degree |
| 152 | Test tube rack | Thermo meter - Mercury liquid in glass 0 degree to 100 degree |
| 153 | Thermo meter | Thermo meter - Mercury liquid in glass 0 degree to 250 degree |
| 154 | Thermo meter | Thermo meter - Alcohol liquid in glass Minus 50 degree to 50 degree , Calibrated, by NABL accredited lab or National Physical Lab |
| 155 | Thermo meter | Thermo meter - Alcohol liquid in glass Minus 20 degree to 10 degree , Calibrated, traceability NABL accredited lab or National Physical Lab |
| 156 | Thermo meter | Thermo meter - Mercury, liquid in glass 0 degree to 100 degree , Calibrated, traceability NABL accredited lab or National Physical Lab |
| 157 | Thermo meter | Thermo meter - Mercury, liquid in glass 0 degree to 250 degree , Calibrated, traceability NABL accredited lab or National Physical Lab |
| 158 | Thermo meter | Thermo meter - Minus 20 degree to 10 degree , digital |
| 159 | Thermo meter | Thermo meter - 0 degree to 250 degree , digital |
| 160 | Thermo meter | Thermo meter - Minus 100 degree to 50 degree , Digital, calibrated, by NABL accredited lab or National Physical Lab |
| 161 | Thermo meter | Thermo meter - Minus 100 degree to 50 degree , Liquid in glass |
| 162 | Thermo meter | Thermo meter - Minus 100 degree to 50 degree , Liquid in glass,calibrated, by NABL accredited lab or National Physical Lab |
| 163 | Thermo meter | • It should be compact and should have block capacity having 96- well plate capacities for 0.2 ml/ 0.5 ml tubes; it should have 96 samples format.• It should has temperature accuracy of ±0.25°C and range from 4.0°C–99.9°C, with Peltier Heating/cooling technique, with self-detected alerts/ safety measure. It should have heated cover (programming). For heating it should increase temperature up to 5°C/sec. Temperature control should be block and calculated. • It should have internal memory with filing capabilities and preferably PCMCIA/USB slot for data storage.• It should have computer and printer interface.• It should have LCD/LED display screen.• It should have power consumption (VAC) of 100-240, 50/60 Hz. • In accessories, it should contain Temperature verification kit, method transfer card, networking software. • It should have CE MARK (MDD) • For air supply, it should meets requirements of UL 3Z77 and cUL.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 164 | Thermo meter | Dual analog output of temperature and humidity for system expansion, Unique LCD dual display which continuously indicates temperature and humidity simultaneously, Compact interchangeable combined temperature/humidity probe, High accuracy, Temperature: +/-0.2ºC Humidity: +/-2.5%RH,One touch "Data-Hold" function, Water resistant design, easy operation, Storage Ambient Range. (Meter) -20 to 60ºC (-5 to 150ºF) Below 85% RH, Resolution Humidity: 0.1% RH. Temperature: 0.1ºC, 0.1ºF |
| 165 | Thermo meter | Dual analog output of temperature and humidity for system expansion, Unique LCD dual display which continuously indicates temperature and humidity simultaneously, Compact interchangeable combined temperature/humidity probe, High accuracy, Temperature: +/-0.2ºC Humidity: +/-2.5%RH,One touch "Data-Hold" function, Water resistant design, easy operation, Storage Ambient Range. (Meter) -20 to 60ºC (-5 to 150ºF) Below 85% RH, Resolution Humidity: 0.1% RH. Temperature: 0.1ºC, 0.1ºF. Calibrated by NABL accredited lab or National Physical Lab |
| 166 | Thermo meter | About 18 L x 12 W x 12 H size, double walled plastic with insulation and carrying handle ( 1 pc ) |
| 167 | Thermo meter | Transport box having dimensions of 10x7x7 inches, with 2 gel packs |
| 168 | Thermo meter | • Linear Measurement range: -200 to +2000 O.D. • Light source: Long life Incadent Iodine Lamp / Halogen lamp with lifesaving facility- 5 W • In built thermal printer and incubator • Temperature locking facility• RS-232 port/USB for computer and up gradable • LCD display • Feather touch keyboard • Filter 340, 546, 405, 505, 578 and 630 nm. (Pass band of + 8 nm.) • Measuring system should be in cuvette mode only.• Instrument should have >90 locations for different tests and >40 locations for MSD mode. • Photometric accuracy < 2 % in O.D. 0-2000. • Photometric linearity + 1%. • Display should be illuminated LCD > 30 characters • Reading volume should be minimum 0.3 ml. • Curve plotting and editing standard should be available.-Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 169 | Thermo meter | 15 Litre Tank, Capable to Clean Rigid Blood Clots, Cells, Lipid and Protein from Dirty Test Tubes with Warm Water + Detergent and Ultra Sound agitation. Timer and Temperature Controlled 10 Litre Capacity and about 500 x 150 x 120 mm size. |
| 170 | Thermo meter | 0.5 KV, VAH:84, AVR for single phase AC, 160 V to 280 V input, 30 min backup |
| 171 | Thermo meter | 0.5 KV, VAH:84, AVR for single phase AC, 160 V to 280 V input, 60 min backup |
| 172 | Thermo meter | 0.65 KV, VAH:168, AVR for single phase AC, 160 V to 280 V input, 30 min backup |
| 173 | Thermo meter | 1.0 KV, VAH:168, AVR for single phase AC, 160 V to 280 V input, 30 min backup |
| 174 | Thermocycler | 1.0 KV, VAH:168, AVR for single phase AC, 160 V to 280 V input, 60 min backup |
| 175 | Thermo-hygrometer | 1.0 KV, VAH:168, AVR for single phase AC, 160 V to 280 V input, 120 min backup |
| 176 | Thermohygrometer- Calibrated | 1.5 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 30 min backup |
| 177 | Transport Box for Blood Sample Test-Tubes | 1.5 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 60 min backup |
| 178 | Transport Box/ Cool Box | 1.5 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 120 min backup |
| 179 | Turbidometer - for serological test | 2.0 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 30 min backup |
| 180 | Ultra-Sonic Cleaner for Glass or PP Test Tubes | 2.0 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 60 min backup |
| 181 | UPS - Line interactive | 2.0 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 120 min backup |
| 182 | UPS - Line interactive | 15.0 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 60 min backup |
| 183 | UPS - Line interactive | 15.0 KV, VAH:800, AVR for single phase AC, 160 V to 280 V input, 120 min backup |
| 184 | UPS - Line interactive | 2.0 KV, AVR for single phase AC, 160 V to 280 V input, 120 min backup, compatible for real time PCR machine |
| 185 | UPS - Line interactive | 3.0 KV, AVR for single phase AC, 160 V to 280 V input, 120 min backup, compatible for real time PCR machine |
| 186 | UPS - Line interactive | 15.0 KV, AVR for single phase AC, 230 V /400 V input, 60 min backup, compatible for real time PCR machine |
| 187 | UPS - Line interactive | 15.0 KV, AVR for single phase AC, 230 V /400 V input, 120 min backup, compatible for real time PCR machine |
| 188 | UPS - Line interactive | 15.0 KV, AVR for three phase AC, 230 V / 400 V input, 60 min backup, compatible for real time PCR machine |
| 189 | UPS - Line interactive | 15.0 KV, AVR for three phase AC, 230 V / 400 V input, 120 min backup, compatible for real time PCR machine |
| 190 | UPS - Line interactive | 2.0 KV, AVR for single phase AC, 160 V to 280 V input, 60 min backup, compatible for real time PCR machine |
| 191 | UPS - Line interactive | 3.0 KV, AVR for single phase AC, 160 V to 280 V input, 60 min backup, compatible for real time PCR machine |
| 192 | UPS - Line interactive | should have dual-use wet and dry ,3 suction nozzles,1 charger, 1 elongated handle,1 led light,dust collection, water absorption, pick up debris and liquid , |
| 193 | UPS - Line interactive | • ISI mark • Automatic 0 -60 minutes timer • Speed -180 RPM • Platform 300 * 300 mm with spring holder |
| 194 | UPS - Line interactive | • ISI mark • Automatic 0 -60 minutes timer • Variable speed (80 RPM to 200 RPM) controller with digital RPM indicator • Platform 300 * 300 mm with spring holder |
| 195 | UPS - OnLine | Maximum speed 3000rpm, should include one hand insert, microtube insert and cup attachment |
| 196 | UPS - OnLine | • Water bath with ISI Mark.• Temperature ambient up to 90 Degree C. +/- 0.5 C. • Digital Display cum Controller.• Stainless Steel Chamber. Should be S.S.304 only• Stirrer with S.S. Shaft & blade with speed Controller.• Calibration Certificate.• Capacity: 2. Racks. Inner Chamber:300x250x150mm -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 197 | UPS - OnLine | • The system should be comprised of a water purification unit with pretreatment, RO, UV and UF, deionization and 0.2µ point of use filter.• Pre-treatment system should consist of filters and booster pump to purify available feed water prior to the main system.• Should have a safety mechanism after RO to divert low quality permeate to drain and thus protect downstream purification cartridges.• Should have easy plug and use design of purification cartridges• Should have automatic recirculation with built in pump when system is not in use, to prevent contamination and deterioration and to maintain optimum water purity.• Should have sanitization free ultra-filtration cartridge with minimum 2 years lifespan and supplied with validation certificate.• Should have UV lamp with minimum 2 years lifespan that will emit both 185 nm and 254 nm of wavelength.• Should have built in resistivity meter with a cell constant of 0.01 cm-1 and 0.10C accuracy thermistor to measure resistivity of RO permeate and final purified water.• Should have alphanumeric display showing product water resistivity and conductivity, product water temperature, error & maintenance messages etc.• Should have storage reservoir of minimum 6 litres with vent filter and level sensor for storing pure water• The water purification system should have full audio visual alarms.• Should supply flexible dispenser for type II water, if required.• Product Water Quality for Type I:o Flow rate: =1 L/min o Resistivity: 18.2 M?-cmo TOC (Total Organic Carbon): < 5ppbo Particles: < 1 P/mlo Bacteria level: < 0.01 CFU/mlo Endotoxins: < 0.001 EU/mlo Should be DNA, RNA, DNAse, RNAse and Pyrogen free• Suitable voltage stabilizer should be supplied with the system• Should provide rates for all consumables and cartridges for 5 years.• CE marked/FDA approved/ISO marked. -Company should provide 3 years compulsory warranty. -Company should provide CMC rates for 05 years after completion of warranty. -For L-1, CMC rates will be considered along with quoted price of equipment. |
| 198 | UPS - OnLine | TDS / Conductivity Testing, Hand Held Meter, Eutech Calibration Certification. |
| 199 | UPS - OnLine | Single pan , Electronic, NIST certified. Readability and repeatability and linearity less than 0.01mg. Weighing capacity more than 05mg |
| 200 | UPS - OnLine | Single pan , Electronic, NIST certified. Readability and repeatability and linearity less than 0.1mg. Weighing capacity more than 50gm |
| 201 | UPS - OnLine | 230V/ 1 KVA Protek Servo/ |
| 202 | UPS - OnLine | 230V/ 3 KVA Protek Servo/ |
| 203 | Vaccum cleaner | 230V/ 5 KVA Protek Servo/ |
| 204 | VDRL Rotator (Rotary shaker) | 230V/ 10 KVA Protek Servo/ |
| 205 | VDRL Rotator (Rotary shaker) | For holding 16 standard 1.5 ml or 2 ml microcentrifuge tubes, working volume 10 µl -1500 µl |
| 206 | Vortex Mixer | For holding 40-50 standard 1.5 ml or 2 ml microcentrifuge tubes, Temperature upto 130°C, Digital display for time and temperature, 230 Volts, 50-60 Hz, Uniformity acrossacross the block +/- 0.6 °C |
| 207 | Water bath | For holding 90-100 standard 1.5 ml or 2 ml microcentrifuge tubes, Temperature upto 130°C, Digital display for time and temperature, 230 Volts, 50-60 Hz, Uniformity acrossacross the block +/- 0.6 °C |
| 208 | Water purification system for clinical laboratory | • Should produce operate and product protection. • Should have Negative pressure bio-decontamination cycle. • Should have Bio bio-decontamination in the exhaust HEPA. • Should have In-built E burnt to protest from virus at exhaust HEPA filter. • Should have UV light inside the working area along with UV meter and should not face the operater. • Should have Deducted or recalculating exhaust options. • Carbon filter available. • Working space needs to have draining tray. • Safety parameters constantly monitored. Safety parameters: a. Password protection (programmable) for authorised operation. b. Initial self cleaning cycle with pro |
| 209 | Water Quality Testing Meter | • Should produce operate and product protection. • Should have Negative pressure bio-decontamination cycle. • Should have Bio bio-decontamination in the exhaust HEPA. • Should have In-built E burnt to protest from virus at exhaust HEPA filter. • Should have UV light inside the working area along with UV meter and should not face the operater. • Should have Deducted or recalculating exhaust options. • Carbon filter available. • Working space needs to have draining tray. • Safety parameters constantly monitored. Safety parameters: a. Password protection (programmable) for authorised operation. b. Initial self cleaning cycle with pro |
| 210 | Weight Balance | Fibre Optic Lamp Type 6853FO, 12V 7500 G26.35 409744, PHILIPS |
| 211 | Weight Balance | Fibre Optic Lamp Type 6853FO, 12V 7500 G26.35 409744, PHILIPS |
| 212 | PCR KIT - Real time RT PCR kit for COVID-19 | "• The Kits must be approved by ICMR or CDSCO. • US-FDA and/or CE-IVD approved kits should have due marketing approval from DCGI. • The kit should use Fluorescent Dye based one step multiplex real-time RT-PCR test intended for specific qualitative detection of nucleic acid from SARS-COV 2. • The Kit should be compatible with manual/automated extracted RNA. • The kit should be based on Taqman probe chemistry. • The kit should be multiplex with multiple targets of SARC COV 2 genes, of which one should be confirmatory gene. • The vendor should provide compatible One step qRT PCR master mix, multiplexed assays (including primers and probes) and required controls for reaction set up, along with the assays. • Kit should have one internal/external amplification control to validate RNA extraction. • Kits should be supplied with appropriate positive controls with known copy numbers for all target genes/regions. • The LOD, specificity and sensitivity of the kit should be mentioned and supported with required data. • The Vendor should have local application support as well service support in this Covid19 pandemic. • The vendor has to provide one-time onsite application support to run COVID19 RT PCR KIT. • Evaluation of the kits will be done on the basis of Technical criteria (50% weightage) and financial criteria (50% weightage). • Technical evaluation of the kit will be done on the basis of Limit of detection/Sensitivity of the kit, number of target genes/regions, multiplexing assay etc. |
| 213 | Swab with Synthetic tip | Swab with Synthetic tip (Rayon) and with plastic shaft, sterile, Pack size - 100 No. |
| 214 | Swab with Synthetic tip | Swab with Synthetic tip (Dacron) and with plastic shaft, sterile, Pack size - 100 No. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
