Tender For Repair / Maintenance Of Steel Furniture At Furniture Yard At Mil Stn Gaya, gaya-Bihar

Repair / Maintenance Of Steel Furniture At Furniture Yard At Mil Stn Gaya. 1 Materials And Labour For Removing Denting Wherever Required Making The Surface Smooth After Removing Old Paint By Grinding Machineremoving, Existing Treatment Completely And A Coat Of Red Oxide Primer , Filling Putty At Required Places And Spray Painting In Og / Grey / White Shade ( As Required ) With Two Coats Of 1St Quality Synthetic Enamel Paint For Following Makes :- Asian / Berger / Nerolac Of Following Items. 2 Almirah Large Steel With Shelves / Almirah Large Steel 1 / 2H X1 / 2S ( Drg No - Fd-67 / Fd-1031 ) 3 Almirahmedium Steel ( Drg No - Fd-67 / Fd-1032 ) 4 Locker Steel ( Drg No - Fd-127 ( M ) / 257 / Fd-1029 ) 5 Rack Steel Off Sizes. ( Drg No - Fd-81 ( M ) / 1023 ) 6 Table Office Officer Steel ( Drg No - Fd-84 / 1002, 1003 ) 7 Table Office Clerk Steel ( Drg No - Fd-84 / 1004 ) 8 Locker Bed Side Steel ( Drg No - Td-645 ) 9 Book Shelves Steel Large ( Drg No - Fd-1028 ) 10 Book Shelves Open Large Steel ( Drg No - Fd-69 ( M ) ) 11 Book Shelves Open Small Steel ( Drg No. 69 ( M ) ) 12 Material And Labour For Replacement Of Lock Of Following Furniture Items With New Lock Of Brass 4 Lever With Duplicate Keys To Be Fixed With Machine Screws Of Required Size All As Specified And Directed By The Engr-In-Charge ( Make Of Lock- Harison / Godrej ) Of Following Items. 13 Locker Bed Side Steel ( Drg No - Td-645 ) 14 Almirah Large Steel With Shelves / Almirah Large Steel 1 / 2H X1 / 2S ( Drg No - Fd-67 / 1031 ) 15 Almirah Medium Steel ( Drg No - Fd-67 / 1032 ) 16 Book Shelf / Book Case Steel Large. ( Drg No - Fd-1028 ) 17 Table Office Clerk Steel ( Drg No - Fd-1004 ) 18 Table Office Officer Steel ( Drg No - Fd-1002 / 1003 / 84 ) 19 Table 3X2 With Drawer Steel ( Drg No - Fd-1008 ) 20 Material And Labour For Replacement Of Handle Of Following Furniture Items With New Handle Of Mild Steel Pressed, Heavy Duty To Be Fixed With Machine Screws And Bolts Of Required Size All As Specified And Directed By The Engr-In-Charge Of Following Items. 21 Almirah Large Steel With Shelves / Almirah Large Steel 1 / 2H X1 / 2S ( Drg No - Fd-67 / 1031 ) 22 Almirah Medium Steel ( Drg No - Fd-67 / 1032 ) 23 Locker Bed Side Steel ( Drg No - Td-645 ) 24 Material And Labour For Replacement Of Haps And Staples Of Following Furniture Items With New Haps And Staples Of Mild Steel 125 Mm Long Anodised Isi Marked, Heavy Duty To Be Fixed With Machine Screws And Bolts Of Required Size All As Specified And Directed By The Engr-In-Charge Of Following Items. 25 Locker Steel ( Drg No - Fd-127M / 257 / 1029 ) 26 Material And Labour For Removing Existing Unserviceable Trestle ( Leg ) Portion Both Sides For Following Furniture Articles And Supply And Fixing New Trestle ( Leg ) Both Sides Made Of 1Mm Thick Ms Sheet Welded As Per Best Trade Practice And As Directed By The Engr-In-Charge Of Following Items 27 Almirah Large Steel With Shelves / Almirah Large Steel 1 / 2H X1 / 2S ( Drg No - Fd-67 / 1031 ) 28 Almirah Medium Steel ( Drg No - Fd-67 / 1032 ) 29 Locker Steel ( Drg No - Td-645 / Fd-257 / 1029 ) 30 Material And Labour For Removing 3 Way Locking Device ( Excluding Lock And Handle ) And Replacement With New 3 Way Locking Device Of Following Furniture Articles As Per Best Trade Practice And As Directed By The Engr-In-Charge Of Following Items.:- 31 Almirah Large Steel ( Drg No - Fd-67 / 1031 ) 32 Almirah Medium Steel ( Drg No - Fd-67 / 1032 ) 33 Locker Steel ( Drg No - Td-645 ) 34 Material And Labour For Replacement Of Existing Unserviceable Shelf And Clamps With New Shelf And Clamps Made Out Of 20 Guage Ms Sheet Made To Shape As Per Existing Shelf Duly Painted With Two Coats Of Synthetic Enamel Paint In Og / Grey Shade Over A Coat Of Red Oxide Primer For Following Furniture Items:- 35 Almirah Large Steel ( Drg No - Fd-67 / 1031 ) 36 Almirah Medium Steel ( Drg No - Fd-67 / 1032 ) 37 Locker Steel ( Drg No - Td-645 / 257 ) 38 Material And Labour For Replacement Of Existing Unserviceable Hanging Rod Cp And Damaged Bracket Of The Rod With New Hanging Rod Cp And Bracket Of The Rodmade Out Ofms As Per Existing Pattern And As Directed By The Engr-In-Charge Of Following Furniture Items:- 39 Locker Bed Side Steel ( Drg No - Fd 22M / 257 / Td-645 ) 40 Material And Labour For Replacement Of Old Unserviceable Drawerswith New Drawer Made Out Of 20 G Ms Sheet Made To Shape As Per Drg And As Specified By The Engr-In-Charge, Duly Painted Withtwo Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Of The Following Items:- 41 Table Office Clerk Steel ( Drg No - Fd-1004 ) 42 Table Office Officer Steel ( Drg No - Fd-1002 / 1003 / 84 ) 43 Table 3’ X 2’ With Drawer ( Drg No - Fd-1008 ) 44 Locker Bed Side Steel ( Drg No - Td-645 ) 45 Chair Tubular Steel With / Without Arms ( Drg No- 75 ( M ) :- 46 Removing The Old Cane From Seat Of Chair Tubular Steel And Re-Weaving With New 2Mm Wide White Colour Virgin Cane In Godrej Pattern As Shown In Drawing And Complete All As Specified And As Directed By The Engineer-In-Charge. Make-Shah / Primiere / Arihant. ( Drg No - Fd-75 ( M ) ) 47 All As Per Srl Item No. 10.01 Above But Back Of Chair Cb Steel With Arms. ( Drg No - Fd-75M ) 48 All As Per Srl Item No. 10.01 Here-In-Before But Seat Of Chair Cb Steel Without Arms. ( Drg No - Fd-75M ) 49 All As Per Srl Item No. 10.01 Here-In-Before But Back Of Chair Cb Steel Without Arms. ( Drg No - Fd-75M ) 50 Materials And Labour For Replacement Of Unserviceable Arm To Chair Cb Steel With New Arms Shall Be Made Of Best Quality Ist Class Hard Wood Teak, Free From Knots, Infection, As Per Drg Duly Painted With Two Coats Of Black Synthetic Enamel Paint Over A Coat Of Pink Primer. ( Drg No - Fd-75M ) 51 Materials And Labour For Replacement Of Unserviceablewooden Frame Of Seat Of Chair Cb Steel With / Without Arm And New Wooden Frame Of Seat Shall Be Made Of Best Quality Ist Class Seasoned Hard Wood, Free From Knots And Infection With 04 Nos Machine Nuts And Bolts 75X4 Mm With Washer To Chair Cb Steel With / Without Arms Of Required Size And Shall Be Painted With Two Coats Of Black Synthetic Enamel Paint Over A Coat Of Wood Primier All As Shown On Drg And As Directed By Engr-In-Charge. ( Drg No - Fd-75M ) 52 Materials And Labour For Replacement Of Unserviceablewooden Frame Of Seatof Chair Cb Steel With / Without Arm And New Wooden Frame Of Seat Shall Be Made Of Best Quality Ist Class Seasoned Hard Wood, Free From Knots And Infection With 04 Nos Machine Nuts And Bolts 75X4 Mm With Washer To Chair Cb Steel With / Without Arms Of Required Size And Shall Be Painted With Two Coats Of Black Synthetic Enamel Paint Over A Coat Of Wood Primier All As Shown On Drg And As Directed By Engr-In-Charge. ( Drg No - Fd-75M ) 53 Supply And Fixing Pvc Toes To Chair Cb Steel With / Without Arms Of Standardapproved Quality. ( Drg No - Fd-75M ) 54 Supply And Fixing Pvc Plug To The Top Of Chairs Cb Steel With / Without Arms Of Standard Approved Quality. ( Drg No - Fd-75M ) 55 S & F ( With Proper Welding Process ) Flat Iron Clamp 25 Mm Wide 4 Mm Thick , 01 Nos In Each Side Of Front Legs / Back Legs Under The Wooden Seat Of Chair Cb Steel With / Without Arms. The Clamp Shall Be Painted Throughout With 1St Quality Synthetic Enamel Paint In Black Shade Over A Coat Of Red Oxide Primer. 56 Materials And Labour For Removing Denting From Steel Frame And Wooden Surface As Wherever Required Making The Surface Smooth After Removing Old Paint By Grinding Machineremoving Existing Treatment Completely And A Coat Of Red Oxide Primer , Filling Putty At Required Places And Spray Painting In Og / Grey / White / Black Shade ( As Required ) With Two Coats Of 1St Quality Synthetic Enamel Paint For Following Makes :- Asian / Berger / Nerolac. ( Drg No - Fd-75M ) . 57 Chair Verandah :- 58 Removing The Old Cane From Seat Of Chair Verandah And Re-Weaving With New 4Mm Wide White Colour Virgin Cane In Chatta Pattern As Shown In Drawing And Complete All As Specified And As Directed By The Engineer-In-Charge. Make-Shah / Primiere / Arihant. ( Drg No - Fd-359 ) 59 All As Per Srl Item No 11.01 Above But Back Of Chair Verandah ( Drg No - Fd-359 ) 60 M & L For Painting To Frame Of Chair Verandah With White Synthetic Enamel Paint 1St Quality Including Preparation Of Surface. ( After Removing The Cane ) As Specified And Directed By Engineer-In-Charge. ( Drg No - Fd-359 ) 61 M & L For Gas Welding To Frame Of Chair Verandah Including Preparation Of Surface And Removing The Unwanted Welding Spot All As Directed By Engineer-In-Charge. ( Drg No - Fd-359 ) 62 Supply And Fixing With Gas Welding In Replacement Of Unserviceable Portions Of Frame Ofchair Verandahwith 20Mmconduit Pipe Of Wall Thickness 1.6Mm Duly Gas Welding Completeall As Directed By Engr-In-Charge. ( Drg No - Fd-359 ) 63 Chair Verandah :- 64 Materials And Labour For Removing Denting Wherever Required Making The Surface Smooth After Removing Old Paint By Grinding Machineremoving Existing Treatment Completely And A Coat Of Red Oxide Primer , Filling Putty At Required Places And Spray Painting In Og / Grey / White Shade ( As Required ) With Two Coats Of 1St Quality Synthetic Enamel Paint For Following Makes :- Asian / Berger / Nerolac Of The Following Items. 65 Table 900Mm X 900Mm ( 3Ft X 3Ft ) Steel ( Drg No - Fd-1009 ) 66 Table 900Mm X 600Mm ( 3Ft X 2Ft ) With Drawer Steel ( Drg No - Fd-1008 ) 67 Table 900Mm X 600Mm ( 3Ft X 2Ft ) Without Drawer Steel ( Drg No - Fd-1007 ) 68 Teapoy Verandah Steel ( Fd-208, 380 ) 69 M & L For Welding To The Frame Of Table Including Preapartion Of Surface And Removing The Unwanted Welding Spot And Smoothening The Surface With Grinder, All As Shown In Drawing And As Directed By Engineer-In-Charge. ( Drg No - Fd-1009 / 1008 / 1007 / 165 ( M ) ) 70 Supply And Fixing With Gas Welding In Replacement Of Unserviceable Portion Of Table Frame With New Square Tube Of Appropriate Size Of Existing Table Frame. All As Per Drawing And As Directed By Engineer-In-Charge. ( Drg No - Fd-1009 / 1008 / 1007 / 165 ( M ) ) 71 S & F Rubber Toes To The Bottom Of Table 3’ X 3’ / 3’ X 2’ ( Drg No - Fd-1009 / 1008 / 1007 / 165 ( M ) 72 Description For Ser Item No 13.01 To 13.07 : Material And Labour For Replacement Of Existing Unserviceable Top With New Top Made Out Of 18Mm Thick Prelaminated Particle Board Isi Marked Exterior Grade Bwr Type One Side Teak And Other Side White With Teak Wood Beadings All As Shown And Specified On Drawing And As Directed By Engr-In-Charge. 73 Replacement Of Top Of Table Office Officer Steel. ( Drg No - Fd-1002 / 1003 ) 74 Replacement Of Top Of Table Office Clk Steel. ( Drg No - Fd-1004 ) 75 Replacement Of Top Of Table 900 X 900 ( 3Ft X 3Ft ) . ( Drg No - Fd-1009 ) 76 Replacement Of Top Of Table 900 X 600 ( 3Ft X 2Ft ) With Drawer. ( Drg No - Fd-1008 ) 77 Replacement Of Top Of Table 900 X 600 ( 3Ft X 2Ft ) Without Drawer. ( Drg No - Fd-1007 ) 78 Replacement Of Top Of Table Dining Ors Steel. ( Drg No - Fd-165 ( M ) 79 Replacement Of Top Of Teapoy Verandah. ( Drg No - Fd-208 / 383 ) 80 Charpoy Gi Hard Top ( Drg Fd-220 ( R ) ) 81 Taking Out Old Unserviceable Long Rail Gi Pipe With Plytopand S&Fnew Long Rail Of 32Mm Dia Gi Pipe Medium Grade Duly Threaded Both Sides As Required 82 Taking Out Old U / S Short Rail From Charpoy Gi Pipewith Plytop And S&F With Replacement Of The Same From The Item Recd From Item At Sl No. 14.01 With Threading At Both Ends. 83 Taking Out Old U / S Legs And S&F With Replacement Of The Same From The Item Recd From Item At Srl No. 14.02 Above With Proper Threading At One End. All As Shown On Drg And As Directed By Engr-In-Charge. 84 S & F New Elbow In Place Of Damaged / Broken Elbow 32Mm Dia Medium Grade 3 Way Isi Maked ( Weight Not Less Than 450Gm Each ) . All As Shown On Drg And As Directed By Engr-In-Charge. 85 S & F New Heavy Duty Checknut 32Mm Dia, In Place Of Broken Check Nut All As Shown On Drg And As Directed By Engr-In-Charge. 86 Taking Out Old U / S Ply From Charpoy Gi Pipe With Plytop And S&F New 12Mm Ply Bwr Type Alongwith 13 Nos Of Nut And Bolts Of Appropriate Approved Size In Each Charpoy.All As Specified In Drg And As Directed By Engr-In-Charge.Make : Kitply / Century / National. 87 S & F ( With Proper Welding Process ) Flat Iron Stiffners 880X32x5mm , 01 Nos In Each Charpoy In Between The Long Railsthe Stiffeners Shall Be Painted Throughout With 1St Quality Synthetic Enamel Paint In Black Shade Over A Coat Of Red Oxide Primer. 88 S & F ( With Proper Welding Process ) Flat Iron Clamp 75X32x5 Mm, 01 Nos In Each Side Of Short Rail Of Each Charpoy. The Clamp Shall Be Painted Throughout With 1St Quality Synthetic Enamel Paint In Black Shade Over A Coat Of Red Oxide Primer. 89 Taking Out Old Unserviceable Flat Iron Clamp Of Mnf And S&Fnew Flat Iron Clamp Of Mnf Set Frame In Legs Of Charpoy Gi Pipe With Black Colour Painting Complete. 90 Tightening Of Loose Check Nuts, Elbows Long Rails, Legs Etc Complete Charpoy All As Directed By Engr-In-Charge. 91 Charpoy Gi Pipe With Nylon Newar As Under ( Drg No - Fd-220:- ( A ) Removing Of Unserviceable Nylon Newar From Charpoys Gi Pipe. ( B ) Tightening Of Loose Check Nuts, Elbows Long Rails, Legs Etc Complete Charpoy. ( C ) S & F ( With Proper Welding Process ) Flat Iron Stiffners 880X32x5mm , 03Nos In Each Charpoy In Between The Long Rails And Flat Iron Stiffners 75X32x5 Mm, 02 Nos In Each Side Of Short Rail Of Each Charpoy. The Stiffeners Shall Be Painted Throughout With 1St Quality Synthetic Enamel Paint In Black Shade Over A Coat Of Red Oxide Primer. ( D ) S & F Of Plywood Commercial Both Side 12Mm Thick Ply With 13 Nos Of Nut And Bolts Of Appropriate Approved Size In Each Charpoy. Size Of Ply Shall Be 1980Mm X 900Mmapprox, The Ply Shall Be Of Bwr Exterior Grade Isi Marked Of Make. Century / Kitply / National. The Edges Of Ply Fixed On Charpoy Shall Be Made Half Round. T.W. Beading 4Mm Thick Should Be Fixed Around The Ply. 92 Chair Revolving / Chair Computer Revolving ( Drg - Tp ) 93 Supply And Fixing In Replacement Of Unserviceable Seat Of Chair Revolvingwith New Seat 75 Mm Thick Foam With New Latherite / Tapestory Cloth In Dark Colour All As Per Sample And As Directed By Engineer-In-Charge. 94 All As Per Srl Item No. 16.01Here-In-Before But Back Of Chair Revolving. 95 Supply And Fixing In Replacement Of Unserviceable Latherite / Tapestory Of Seat And Back Of Chair Revolvingwith New Latherite / Tapestory Seat And Back In Dark Colour All As Per Sample And As Directed By Engineer-In-Charge. 96 All As Per Srl Item No.16.01 Here-In-Before But Hydraulic System Ofchair Revolving. 97 All As Per Srl Item No. 16.01 Here- In Before But Base Chromium Plated Of Chair Revolving . 98 All As Per Srl Item No. 16.01 Here-In-Before Butarms With Screws Of Chair Revolving . 99 All As Per Srl Item No. 16.01 Here- In Before But Caster Wheels Of Chair Revolving . 100 Material And Labour For Replacement Of Existing Unserviceable Clampswith New Clampsmade Out Of 18 Guage Ms Sheet Made To Shape As Per Existing Shelf Duly Painted With Two Coats Of Synthetic Enamel Paint In Og / Grey Shade Over A Coat Of Red Oxide Primer For Following Furniture Items:- 101 Almirah Large Steel ( Drg No - Fd-67 / 1031 ) 102 Almirah Medium Steel ( Drg No - Fd-67 / 1032 ) 103 Box Kit Steel ( Fd-98 ( M ) ) 104 Materials And Labour For Removing Denting Wherever Required Making The Surface Smooth After Removing Old Paint By Scrubbing With Emery Paper, Removing Existing Treatment Completely , Filling Putty At Required Places And Spray Painting In Og / Grey / White / Black Shade ( As Required ) With Two Coats Of 1St Quality Synthetic Enamel Paint For Following Makes :- Makes :- Asian / Berger / Nerolac 105 Material And Labour For Replacement Of Haps And Staples Of Box Kit Steel With New Haps And Staples Of Mild Steel Pressed, Heavy Duty To Be Fixed With Machine Screws And Bolts Of Required Size All As Per Existing Pattern Specified And As Directed By Engineer-In-Charge. 106 Material And Labour For Replacement Of Hings Of Box Kit Steel With New Hings Of Mild Steel Pressed, Heavy Duty To Be Fixed With Machine Screws And Bolts Of Required Size All As Per Existing Pattern Specified And As Directed By Engineer-In-Charge. 107 Material And Labour For Replacement Of Side Chain / Adjustable Clip Of Box Kit Steel With New Side Chain / Adjustable Clip Of Mild Steel Pressed, Heavy Duty To Be Fixed With Machine Screws And Bolts Of Required Size All As Per Existing Pattern Specified And As Directed By Engineer-In-Charge. 108 Table Bed Side ( Fd / E6 / Map / 08 ( R ) ) 109 Dismantling Carefully And Taking Out Old Unserviciable / Damaged Side Portion Of Sizeof The Table Bed Side Map As To Match With The Existing Made Out Of 18Mm Thick Pre-Laminated Particle Board Including 1 Mm Thich Pvc / 4 Mm Thickteak Wood Beading All Around With Fevicol To Required Shape And Size With Laminated Finish. All As Per Existing Pattern And Drg And As Directed By Engr-In-Chrge. 110 Dismantling Carefully And Taking Out Old Unserviciable / Damaged Topportion Of The Table Bed Side As To Match With The Existing Made Out Of 18Mm Thick Pre-Laminated Particle Board With Laminated Finish And Pvc / 4Mm Thick Teak Wood Beading All Round With Fittings And Fixtures As Required Shape & Size And Fixed The Same Properly As Per Drg.All As Per Existing Pattern And Drg And As Directed By Engr-In-Chrge. 111 Dismantling Carefully And Taking Out Old Unserviciable / Damagedbottom Portion Of The Table Bed Side As To Match With The Existing Made Out Of 12Mm Thick Bwr Plywoodwith Fittings And Fixtures As Required Shape & Size And Fixed The Same Properly As Per Drg.All As Per Existing Pattern And Drg And As Directed By Engr-In-Chrge. 112 Dismantling Carefully And Taking Out Old Unserviciable / Damagedback Portion Of The Table Bed Side As To Match With The Existing Made Out Of 12Mm Thick Bwr Plywood With Fittings And Fixtures As Required Shape & Size And Fixed The Same Properly As Per Drg.All As Per Existing Pattern And Drg And As Directed By Engr-In-Chrge. 113 Dismantling Carefully And Taking Out Old Unserviciable / Damaged Upper Drawer Of Table Bed Side Map And Supply & Fixed Of New Drawer Made Out Of 18Mm Pre-Laminated Particle Board Of Approved Shadeand Pvc / 4Mm Thick Teak Wood Beading All Round With Fittings And Fixtures As Required Shape & Size And Fixed The Same Properly Allas Per Drg And As Directed By Engr-In-Chrge. 114 Dismantling Carefully And Taking Out Old Unserviciable / Damaged Lower Drawer Of Table Bed Side Map And Supply & Fixed Of New Drawer Made Out Of 18Mm Pre-Laminated Particle Board Of Approved Shadeand Pvc / 4Mm Thick Teak Wood Beading All Round With Fittings And Fixtures As Required Shape & Size And Fixed The Same Properly Allas Per Drg And As Directed By Engr-In-Chrge. 115 Dismantling Carefully And Taking Out Old Unserviciable / Damaged Telescopic Channel Of Drawer Of Table Bed Side Map And Supply & Fixed Of New Telescopic Channel Of Drawer Made Out Of Steel Telescopic Channels With Ball For Easy Movement As Required Shape & Size And Fixed The Same Properly Allas Per Drg And As Directed By Engr-In-Chrge. 116 Dismantling Carefully And Taking Out Old Unserviciable / Damaged Handle Of Drawer Of Table Bed Side Map And Supply & Fixed Of New Handle Of Drawer Made Out Of Steelwith 10 Cm Long For Easy Grab As Required Shape & Size And Fixed The Same Properly Allas Per Drg And As Directed By Engr-In-Chrge. 117 Dismantling Carefully And Taking Out Old Unserviciable / Damagedfront Verticalportion Of The Table Bed Side As To Match With The Existing Made Out Of 18Mm Thick Pre-Laminated Particle Board With Screw Fittings And Fixtures As Required Shape & Size And Fixed The Same Properly As Per Drg.All As Per Existing Pattern And Drg And As Directed By Engr-In-Chrge. 118 Preparation Of Tighting Loose Joints With L Shaped Interconneted Servo Bracket And Screw Of Loose Surfaces, If Any Including De-Rusting The Surface Then Rubbing With Sand / Emery Paper And Applyingmalamine Polish One Or More Coat Of Approved Quality To Achieve Uniform Smooth Texture And High Glossy Finish After Filing Holes With Beas Wax Complete All As Specified And As Directed. 119 Chair Padded With Arm ( Drg: Tp ) 120 Materials And Labour For Removing Of Old And Unserviceable Cushion And Tapestry Of Seatfrom Chair And Supply & Fixing Of Newcushion And Tapestry Of Seat As Per Sample Complete All As Specified And Directed As Per Engineer -In- Charge. 121 All As Per Srl Item No. 20.01 Above But Back Rest Of Chair With Padded Arm Complete. 122 Materials And Labour For Removing Of Old And Unserviceable Tapestry Of Seatfrom Chair And Supply & Fixing Of Newtapestry Of Seat As Per Sample Complete All As Specified And Directed As Per Engineer -In- Charge. 123 Materials And Labour For Removing Of Old And Unserviceable Tapestry Of Back Restfrom Chair And Supply & Fixing Of Newtapestry Of Back Rest As Per Sample Complete All As Specified And Directed As Per Engineer -In- Charge. 124 Cleaning Of Steel Surfaceof Chair With Padded Arms And Making Good Old Surface And Applying Two Coat Of Black Synthetic Enamel Paint Complete All As Specified And Directed 125 Supply & Fixing New Arm Ofchair Padded Suitable Size And Design As Per Orignal Pattern Of Different Make And Model All As Specified And Directed By The Engineer –In- Charge. 126 Supply & Fixing In Replacement Of Unserviceable Rubber Shoes Of Chair Padded With Arms With New Rubber Shoes All As Specified And Directed By The Engineer –In- Charge. 127 Table Writing Multipurpose Tp-Godrej 128 Materials And Labour For Removing Denting Wherever Required Making The Surface Smooth After Removing Old Paint Scrubbing With Emery Paper, Removing Existing Treatment Completely , Filling Putty At Required Places And Spray Painting In Og / Grey / White Shade ( As Required ) With Two Coats Of 1St Quality Synthetic Enamel Paint Out Of The Following Makes :- Asian / Berger / Nerolac 129 M & L For Gas Welding To Frame Of Table Writingmultipupose Godrej Including Preparation Of Surface And Removing The Unwanted Welding Spot All As Per Existing Pattern Specified And As Directed By Engineer-In-Charge. 130 Material And Labour For Replacement Of Lock With New Lock Of Brass 4 Lever With Duplicate Keys To Be Fixed With Machine Screws Of Required Size All As Specified And Directed By The Engr-In-Charge ( Make Of Lock- Harison / Godrej ) :- 131 Taking Out Unserviceable Top Ands&F New Top 1200 Mm X 600Mm Made Out Of 19Mm Thick Ext -Gde Prelaminated Particle Board Bwr Grade, Bended With Phenol Formaldehyde Synthetic Resin Adhesive With Malamine Finish Isi Marked Is-12823 ( 1990 ) .Gde-I Type Ii Having Desired Shade On One Side And Balancing White Lamination On Other Side, Including 6Mm Thick Teak Wood Edging All Around With Fevicol, Nails And Polish Complete All As Directed By Engineer-In-Charge. 132 Material And Labour For Replacement Of Old Unserviceable Drawerswith New Drawer With Plastic Handle Made Out Of 20 Gauge Ms Sheetmade To Shape As Per Drg And As Specified By The Engr-In-Charge, Duly Painted Withtwo Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer All As Per Existing Pattern Specified And As Directed By Engineer-In-Charge.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	08-07-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	15-07-2023

INR 500 /-

INR 50000.0 /-

INR 25 Lakhs /-