|
| 1 | Supply ofpiping materials like, pipe, fittings, flanges , fabrication, NDT, RFID taging, Packing, transportation and delivery of fabricated spools at NREP EPCM1 project site |
| 2 | Scope includes supply ofpiping materials like, pipe, fittings, flanges ,fabrication , surface preparation and painting, NDT,RFID taging , Packing , transportation and delivery of fabricated spoolsat NREP EPCM1 project site at NRL refinery. Fabrication of Piping Spools including cutting, edge preparation,( including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/differentthickness wherever required); fitup, bending, preheating/ post heating wherever required, welding (including stress relieving), threading, tappings for pressure gauges, thermowells, sample connections , piping specials such as mitres and fabricated fittings, vents, drains, reinforcement pads etc .scope also includesSupports welding which needs to be welded with parent spool .Cleaning & flushing by water/compressed air - Surface - preparartion, application of primer, intermdiate and final coat marking as perpainting specification |
| 3 | Scope also includes all type of testing as specified in the specification for Non- Destructive Examination of Pipingincluding pressure test including test mediumas per specifications / codes , draining of water , drying by compressed air. Quoted rates shall includes all expenses towards this . Engaging approved Third Party Inspection agency (TPIA) for stage wise inspection for procurementand fabrication, inspection release notesall inclusiveas per approved QAP/ITP.Performing Positive Material Identification(PMI) using alloy analysers.- Stage wise inspection for procurementand fabrication, inspection release notesall inclusiveas per approved QAP / ITP.Bidder shall make all neccessary arrangment for hydrotesting including all temporary material like nut bolts , gaskets etc . Pickling of SS joints . SS pipeline shall be tested by water having Chloride content less than 25 PPM. Scope is Including all consumables, labour, machineries, supervision, preparation & submission of necessary spool mark up plan , quality document , final documentation etc. needed to complete work as per specifications and drawings. Quoted rate shall includes water and power arrangement . Bidder quoted rate shall includes all charges towards handing over of material to store /contractor and obtaining documentation for delivery of piping spools. Supports welded directly to pipe only from parent pipe is included in vendor scope . vendor shall follow minimum basic criteria for spool fabrication . Minimum 70 % of Joints of any isometric shall be welded in shop . Straight length pipe shall not be considered in spool- For detailed scope of work ref. Annexure scope of work and supply . Manpower deployment : Providing skilled personnel till the contract period at NRL site for spool management ,Monitoring, Coordination as per SOW documentNote: Quantity of the supplied materials shall be considered for the payment only after due certification by TPIA and submission of the documents to NRL / EPCM1to that effect. |
| 4 | Supply of piping prefabricated spoolsof various sizes, MOCs ( Pipe, fittings , flanges , weldedable supportsetc, as per Scope defined elsewhere in the tender document) , Fabrication , NDT , Testing,Painting,Transportation and Delivery of the same to site.Note: Up to 10mmtickness <= 10MMBetween 10 mm to 20mm thickness > 10MM AND <= 20MMAbove 20mm thickness> 20MM |
| 5 | CategoryOfMaterial Group:Carbon Steel |
| 6 | CARBON STEEL NON IBR( Up to 10mmtickness) |
| 7 | CARBON STEEL NON IBR( Between 10 mm to 20mm thickness) |
| 8 | CARBON STEEL - H2 SERVICE ( Up to 10mmtickness) |
| 9 | CARBON STEEL - H2 SERVICE ( Between 10 mm to 20mm thickness) |
| 10 | CARBON STEEL - NACE( Up to 10mmtickness) |
| 11 | CARBON STEEL - NACE( Between 10 mm to 20mm thickness) |
| 12 | CARBON STEEL - ( NACE + H2 )( Up to 10mmtickness) |
| 13 | CARBON STEEL - (NACE+H2)( Between 10 mm to 20mm thickness) |
| 14 | CARBON STEEL - (NACE+H2)( above 20mm thickness) |
| 15 | CARBON STEEL - IBR( Up to 10mmtickness) |
| 16 | CARBON STEEL - NACE + Amine( Up to 10mmtickness) |
| 17 | CARBON STEEL - Galvanized( Up to 10mmtickness) |
| 18 | CARBON STEEL - Int. Coated / external coated ( Up to 10mmtickness) |
| 19 | CARBON STEEL - Int. Coated / external coated( Between 10 mm to 20mm thickness) |
| 20 | CategoryOfMaterialGroup -LTCS |
| 21 | LTCS ( Up to 10mmtickness) |
| 22 | LTCS ( Between 10 mm to 20mm thickness) |
| 23 | LTCS(AMINE+CAUSTIC) ( Up to 10mmtickness) |
| 24 | LTCS(AMINE+CAUSTIC) ( Between 10 mm to 20mm thickness) |
| 25 | CategoryOfMaterialGroup -ALLOY STEEL |
| 26 | ALLOY STEEL ( P11)- H2( Up to 10mmtickness) |
| 27 | ALLOY STEEL ( P11)- H2 ( Between 10 mm to 20mm thickness) |
| 28 | CategoryOfMaterialGroup:STAINLESS STEEL (SS304 ,SS304L and SS316, SS316L, SS321) - NACE ,H2, NACE+H2 |
| 29 | STAINLESS STEEL - SS 304 / 304L( Up to 10mmtickness) |
| 30 | STAINLESS STEEL - SS 321( Up to 10mmtickness) |
| 31 | STAINLESS STEEL - SS 321 ( Between 10 mm to 20mm thickness) |
| 32 | STAINLESS STEEL - SS 321 (H2 SER.)( Up to 10mmtickness) |
| 33 | STAINLESS STEEL - SS 321 (H2 SER.)( Between 10 mm to 20mm thickness) |
