Bids Are Invited For Spares For Ball Mill 1 1000062901_1_12506011230 Feed Chute For Ball Mill 1001 & 1002 As Per Drg No-Nalco/Mech/Misc/4653/R0.Inner Wear Plate Should Be 10Mm Thick Sail Hard Plate Welded Firmly On Main Chute. 1 Ea Arbind.Singh 180 2 , Bhubaneswar-Odisha

Bids Are Invited For Spares For Ball Mill 1 1000062901_1_12506011230 Feed Chute For Ball Mill 1001 & 1002 As Per Drg No-Nalco / Mech / Misc / 4653 / R0.Inner Wear Plate Should Be 10Mm Thick Sail Hard Plate Welded Firmly On Main Chute. 1 Ea Arbind.Singh 180 2 1000062901_2_10110301000 Hardox Plate For Bm-1001 / 1002 Feed Chute As Per Drg Nonalco / Mech / Misc / 5071 / R0.Moc-Hardox500 Only, Thickness-12 Mm. Total-8 Nos Plate In One Set As Per Drawing.Hardness 500Hbw. 2 Set Arbind.Singh 180 3 1000062901_3_10110323540 Arcofon Grade-2560-6 / 9 Trapezodal Plate, Size-Parallel Sides 1400Mm & 50 Mm, Height 750Mm Plate Thick =15Mm ( Base=9 Mm Hardened + Layer=6Mm ) , Hardness= 62-65 Hrc.For Ball Mill No03, 04, 05 6 Ea Arbind.Singh 180 4 1000062901_4_10110324040 Arcofon Grade-2560-6 / 9 Rectangular Wear Plate, Size- 875Mm X 460Mm .Plate Thickness - 15 Mm ( Base = 09 Mm + Hardene D Layer = 06 Mm ) Hardness = 62-65 Hrc.For Ball Mill No03, 04, 05 6 Ea Arbind.Singh 180 5 1000062901_5_10110324730 Wear Resist Extralife Plate As Per Drg No-Nalco / Mech / Misc / 4893 Moc-Sail Hard Only.Thickness-14 Mm.Each Set Consists Of 5 Nos Plare As Per Dimension Mensioned In Drawing.Hardness-200 Bhn.For Ball Mill No03, 04, 05 Lower Rtapezodal Spool 6 Ea Arbind.Singh 180 6 1000062901_6_12506014780 Apex Valve Housing For Hydrocyclone Of Ball Mills. As Per Drg No.Nalco / P&D / M-364 Rev3. 18 Ea Arbind.Singh 180 7 1000062901_7_12701009880 Coupling Hub For Desilicator Gear Box. As Per Drg.No:Nalco / Mech / Misc-2519 / R2. 2 Ea Arbind.Singh 180 8 1000062901_8_12701008520 Desilication Agitator Blade-B2. [ M2 ] With 1 Set Fastner, Comprising Item 1, 2 And 3 As Per Drg.# Nalco / Mech / Misc-1684, Rev-1. Sheet # 2Of 5 4 Ea Arbind.Singh 180 9 1000062901_9_81808113060 Modified Trommel Screen Segment For Ball Mill-No 701 As Per Drg Nonalco / Mech / 3261 / R1. Moc-Sailhard Only.Hardness-200 Bhn. 18 Ea Arbind.Singh 180

Refer document

Refer document

Refer document