Tender For Purchase Of Various Items To The Civil Engineering Department Of Mar Athanasius College Of Engineering Using Fund From Government Of Kerala., Kothamangalam-Kerala
TDR : 37851743
Tender Notice
BOQ
Expired
Kothamangalam
Kerala
Tender For Purchase Of Various Items To The Civil Engineering Department Of Mar Athanasius College Of Engineering Using Fund From Government Of Kerala.
CONTROL PANEL It shall be a standalone close loop automatic controls console to perform test from basic failure test (Compression, flexure, splitting), cyclic tests for elastic modulus and Poisson ratio determination and advance displacement control tests.The unit shall consist of hydraulic power system, personal computer (PC) and printer for testing system and related legal and licensed version of Interactive software compatible with window operating system.The detailed specification for the Hydraulics, Hardware, PC and Software, E-MODULE software and Displacement-Control software are attached separately. The machine should satisfy all the conditions.
2
COMPRESSING TESTING FRAME 3000 KN CAPACITYHigh stability compression testing machineHeavy duty spherical seat in oil lubricating oil bath, allowing free alignment at the initial contact with the specimen and automatic jamming up to the end of the test.Distance piece to reduce vertical heightWorking Range: 150kN to 3000kN, Resolution: 0.1 kNVertical daylight: 350 mmHorizontal daylight: 370 mmPiston stroke: 50 mm
3
200 KN CAP. HIGH STIFFNESS FLEXURE FRAMEConfirming to ASTM C1550(Round Panel test), EN14488-5(Square Panel test), ASTM C1609, ASTM C1018(FRC/Shotcrete), EN14651 (CMOD)Complete with roller for center and two-point loading on concrete beam 100x100x400/500mm and 150x150x600/700 mmHorizontal clearance: 1000mmDistance between upper rollers: adjustable from 100 to 200mm or single rollerDistance between lower rollers: adjustable from 150 to 700mmRollers: 38 mm dia x 300 mm Length: 4 NosFrame stiffness 200 kN/mm,piston travel 130mm
4
ELECTRONIC UNIVERSAL EXTENSOMETER/COMPRESSOMETER For cylinders, prisms and cubes. Supplied with short distance piece for use with prisms 40x40x160 mm and 2 elastic bands
5
ACCESSORIES FOR THE FLEXURAL TESTING OF FIBBER REINFORCED CONCRETEAuxiliary testing frame capable of holding beam specimen of following sizes:100 mm × 100 mm × 500 mm150 mm × 150 mm × 700 mmTwo LDT displacement transducer 10mm, out 2mv/v, with m12 male connector and female connector complete with cableConforming to BS EN 14488-3: 2006, ASTM C1609
6
CRACK OPENING (CTOD-CMOD) TO EN 14651 High Precision displacement transducer for measuring Crak Tip Openin Displacement (CTOD) and Crack Mouth Opening Displacement (CMOD)Measuring capacity: 5 (3 to 8 ) mm Sensitivity: 1000x 10-6 Strain÷mm
7
ENERGY ABSORPTION OF SPRAYED CONCRETE AS PER EN 14488-5 Test accessories includes square base and upper loading element for testing 600x600x100mm sprayed concrete slabs along with 50mm displacement transducer for measuring the Deformation both the slab centre under concentrated loadHigh Precision displacement transducer, LDT type 50 mm travel, Output 2mV/VHigh precision displacement transducer type 100 mm travel, Output 2mV/V
8
500/15 KN CAP. DOUBLE CHAMBER HYDRAULIC FRAME FOR TESTING CEMENT, MORTAR, RESIN, HYDRAULICALLY BOUND MIXTURES AND OTHER MATERIALS. Compression testing platen: 165 mm dia. X 30 mm thicknessVertical Daylight: 300/205 mmHorizontal daylight: 275 mmRam travel: 50/30 mmLimit switch preventing pistons overtravelCompression device to test portions of 40 x 40 x160 mm mortar prism broken in flexure High stiffness model with 3-columns frameFlexure testing device for 40x40x160 mm mortar specimens
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
