|
| 1 | Dismantling of existing repairable Tower ACs, split AC 1.5TR/2.0 TR/3.0 TR/4.0 TRWindow AC, 1.5/2.0 TRof any make and capacity from its position after disconnecting electric connections, for carrying out repairs and renewal/ replacements of Parts, reassembling andinstallation of the same on same location and making electric connection etc. complete all as specified and directed.(Note :- Parts renewed shall be measured and paid separately under appropriate item(s) listed herebelow. |
| 2 | Supply onlyrunning capacitor ofcapacity 36 Mfd in plastic container complete all as specified and directed. |
| 3 | Supply supply only running capacitor ofcapacity 50+5Mfdin plastic container complete all as specified and directed. |
| 4 | Supply supply only running capacitor ofcapacity 45 Mfdin plastic container complete all as specified and directed. |
| 5 | Supply only Air Censor for temperature controlfor 1.5 TR / 2 TR compressor complete all as specified and directed. |
| 6 | Supply only Swing motor for 1.5 TR / 2 TR indoor unit of split type invertor/normal air conditioner complete all as specified and directed. |
| 7 | Supply only Swing motor for 1.5 TR / 2 TR window AC complete all as specified and directed. (Make :- LG/Carrier/Voltas). |
| 8 | Supply onlybrass suction valve size 3/8\" complete all as specified and directed. |
| 9 | Supply only Discharge valve size 1/2\" complete all as specified and directed. |
| 10 | Supply onlycharging valve 1/4\" dia for carrier make split AC complete all as specified and directed. |
| 11 | Supply only flare nuts size 3/8\" complete all as specified and directed. |
| 12 | Supply only flare nuts size 1/4\" complete all as specified and directed. |
| 13 | Supply only flare nuts size 1/2\" complete all as specified and directed. |
| 14 | Supply only flare nuts size 5/8\" complete all as specified and directed. |
| 15 | Supply only copper Gas filter for AC 1.5 TR / 2 TR capacity complete all as specified and directed. |
| 16 | Supply only PVC insulated three core stranded copper cable of size 80/0.20 ( 2.5 sqmm) complete all as specified and directed. |
| 17 | Supply onlyMCB SP 6 to 32 Amps ratingto be housed in DBs catered here in after complete all as specified and directed.(Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) |
| 18 | Supply onlyMettalic Plugs ( top) of AC box 20A, specified make , 2P+Eand connecting complete all as specified and directed. |
| 19 | Supply only of puff insulation of size1/2\" suitable for 1.5 TR/2.0 TR AC complete all as specified and directed. |
| 20 | Supply only of puff insulation of size1/4\" suitable for 1.5 TR/2.0 TR AC complete all as specified and directed. |
| 21 | Supply only of puff insulation of size5/8\" suitable for 1.5 TR/2.0 TR AC complete all as specified and directed. |
| 22 | Supply and Fix in repair copper capillary of size 0.60 mm complete all as specified and directed. |
| 23 | S&F in repair plug and socket DBs with single pole MCB rated 32 Amps capacity with socket plug top 2 pin and earth plug complete all as specified including making niche in wall and mounted flush complete all as specified and directed. |
| 24 | Supply and fix PVC pipe nylon imbraided 15 mm dia forcondensed waterdrain fitted with clamps/concealed in wall complete all as specified and directed. |
| 25 | Supply and fix in repairof copper tubing 3/8\"diacomplete all as specified and directed. |
| 26 | Supply and fix in repairof copper tubing 1/2\" diacomplete all as specified and directed. |
| 27 | Supply and fix in repairof copper tubing 1/4\" diacomplete all as specified and directed. |
| 28 | Supply and fix remote hand set of window type air conditioner of cap 1.5/2.0 TR of existing make with and including pencil cells complete all as specified and directed. (Make:- LG / Samsung / Bluestar) |
| 29 | Supply and fixremote hand set of Split type air conditioner of cap 1.5/2.0 TR of existing make with and includingpencil cells complete all as specified and directed (Make:- LG / Samsung / Bluestar) |
| 30 | Supply and fix PVC fan blade with gun metal bush of blower , Screw complete all as specified and directed. |
| 31 | Supply and fixPVC runner for window A.C. as per sample complete all as specified and directed. |
| 32 | M&L for taking down of Split type AC of any capacity or model and transporting and refixing at New Location including testing of leakage and charging/top up of specified gasas per the make of the AC and make it fully functional again at new location with complete all as specified and directed. |
| 33 | Taking out defective blower motor from window type AC of cap 1.5/2.0 TR oroutdoor unit of Split type AC of capacity 1.5 TR / 2 TR and transporting defective motor of any make & capacity from site to contractor workshop dismantling the burnt winding & rewinding of 1 / 5 to 1 / 8 HPblower motor with the required size of super enameled copper winding wire of suitable gauge including insulation, varnishing, greasing, testing complete and transporting to back to site and refixing complete all as specified and directed. |
| 34 | Dismantling of burnt blower motor of 1.5 TR/2.0 TR split AC double shaft ( indoor unit)and supply & fixing new blower motor Suitable for Carrier/Voltas/Blue star/LG/Samsung MakeACs as per sample complete all as specified and directed. |
| 35 | Dismantling of burnt outdoor fan motor of 1.5 TR/2.0TR split AC single shaft (outdoor unit)and supply & fixing new outdoor fan motor Suitable for Carrier/Voltas/Blue star/LG/Samsung MakeACs as per sample complete all as specified and directed. |
| 36 | Dismantling of existing window type AC. from its location andrefixingafter doing the following repairs wherever required and complete all as specified and directed.(a) Servicingby oiling & cleaning with liquid soap , cleaning of fins by means of air blower and water with pressure jet and changing of air filtercomplete with cleaning of Cooling & Condensing coil all as directed by EIC.(b) M&L for painting of outer cage and front grillwindow type A/C with two coats of synthetic enameled paint of approved shade and tint including preparation of steel surface by emery paperincluding writing SM No. / MES No. etc with front of grill complete all as directed by EIC |
| 37 | Renewal ofplywood 6 mm thick,BWR, grade 1, one side decorative teak veneers and other side commercial veneered finished complete all as specified and directed. |
| 38 | Renewal of2nd class HW (SAL) fillets, cross sectional area excd 3 and not excd 6 sqcm on all four sides of window type AC splayed or chamfered edge including polishing etc complete all as specified and directed. |
| 39 | Dismantling of defective indoor unit of 1.5 TR capacity split typeAC and supply & fixing indoor unit of the same capacitywith blower motor, front grill and connecting the copper tubing by brazing detecting leak and rectifying the same and recharging with Non CFC refrigerant gas as required the unit in wall/ceiling mounted complete all as specified and directed. |
| 40 | Dismantling of defective condensing unit ( outdoor unit) of spilt type AC of 1.5 TR capacityand supply & fixing new condensing unitcomplete with compressor,condensing coil, coil frame, wiring kit and running capacitor, relay,condensing motorwith blade complete all as specified and directed. (Make :- Totaline/ Bluestar/ Acent/Skoda/ Opel/LG) |
| 41 | Dismantling of defective cooling coil of 1.5 TR window type AC of any make and S&Fcooling coil for AC, detecting the leakage with N2 Gas, reconnecting in to the system complete all as specified and directed. |
| 42 | Dismantling of burntfan motor of 1.5 TR/2.0TR window AC double shaft and supply & fixing newfan motor Suitable for Carrier/Voltas/Blue star/LG/Samsung MakeACs as per sample complete all as specified and directed. |
| 43 | Dismantling of unserviceable compressors of 1.5 TRcapacitiesincluding disconnecting suction / discharge copper tubing and S&F new compressor rotary type with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make –Carrier/ Kirloskar/ Blue star |
| 44 | Dismantling of unserviceable compressors of2 TRcapacitiesincluding disconnecting suction / discharge copper tubing and S&F compressor rotary type with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make –Carrier/ Kirloskar/ Blue star |
| 45 | Dismantling of unserviceable compressors of 1.5 TRcapacities of window/split type ACs including disconnecting suction / discharge copper tubing and S&F compressor reciprocating type with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make –Emerson Model CR-22 / CR-30 or equivalent of Carrier/ Kirloskar/ Blue star |
| 46 | Dismantling of unserviceable compressors of 2 TRcapacities of window/split type ACs including disconnecting suction / discharge copper tubing and S&F compressor reciprocating type with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make – Emerson Model CR-22 / CR-30 or equivalent of Carrier/ Kirloskar/ Blue star |
| 47 | Supply and fixing in repairs front grill quality for window AC of 1.5 TR/ 2 TRof Make National/ Casmo/LG/Carrier / Blue Star/Samsung complete all as specified and directed. |
| 48 | M & L for servicing of Split AC, and tower AC s 1.5/2.0/3.0/4.0 TR Indoor/out door unit by means of electric blower & water under pressure,cleaning & washing of cooling/condencing coilby soap solution or recommended chemical ,oiling & greasing of moving parts such as blower motor etc complete all as specified and directed. |
| 49 | M & L for Nitrogen pressure testing,flushing out the system by Nitrogen ,vacumrnation andcharging of refrigerant gas R-22/R-32/R-410 into the system for 1.5 TR capacity split type AC complete all as specified and directed. (Note :- The refrigerant gas will be providedby Contractor) |
| 50 | M & L for Nitrogen pressure testing,flushing out the system by Nitrogen ,vacumrnation andcharging of refrigerant gas R-22/R-32/R-410 into the system for 2.0 TR capacity split type AC complete all as specified and directed. (Note :- The refrigerant gas will be providedby Contractor) |
| 51 | M & L for Nitrogen pressure testing,flushing out the system by Nitrogen ,vacumrnation andcharging of refrigerant gas R-22/R-32/R-410 into the system for 1.5/2.0 TR capacity window type AC complete all as specified and directed. (Note :- The refrigerant gas will be providedby Contractor) |
| 52 | Supply & Charging (Top up) the AC unit of 1.5 TR / 2 TR split type,window AC unit with refrigerant gas R-22/R-32/R-410/R-134 in required Qty complete all as specified and directed. |
| 53 | S&F reverse cycle solenoid valve in splittype AC 1.5 / 2 TR capacitywithnecessaryextension to suction/ discharge copper tubing & toggle switch complete all as specified and directed. |
| 54 | S&F in replacement New PCB for indoor unit of of capacity 1.5/2.0 TR Split AC ( hot & cold) complete all as specified and directed.(Make-Samsung/LG/Voltas/Daikin/Hitachi/Carrier) |
| 55 | M&L for dismantling of defective PCB of 1.5/2.0 TR capacity Split AC of any make & (cooling only/hot& cold type) from indoor unit and transporting to contractors workshop for repair of the same, transporting back to site & refixing to indoor unit to ensure proper functioning of the AC complete all as specified and directed. |
| 56 | All as per item 55above but for 1.5/2.0 TR WINDOW AC OF any make. |
| 57 | S&F in replacement New PCB for indoor unit of capacity 1.5/2.0 TR Split AC Inverter type( hot & cold) complete all as specified and directed. (Make-Samsung/LG/Voltas/Daikin/Hitachi/Carrier) |
| 58 | S&F in replacement New PCB for Outdoor unit of capacity 1.5/2.0 TR Split AC Inverter type( hot & cold) complete all as specified and directed. (Make-Samsung/LG/Voltas/Daikin/Hitachi/Carrier) |
| 59 | M&L for dismantling of defective PCB of 1.5/2.0 TR capacity Split AC inverter type of any make &(hot& cold type) from indoor unit and transporting to contractors workshop for repair of the same,transporting back to site & refixing to indoor unit to ensure proper functioning of the AC complete all as specified and directed. |
| 60 | Dismantling ,desert cooler,of any make and capacity from its position after disconnecting electric connections, for carrying out repairs and renewal/ replacements of Parts, reassembling andinstallation of the same on same location and making electric connection etc complete all as specified and directed.(Note :- Parts renewed shall be measured and paid separately under appropriate item(s) listed herebelow. |
| 61 | Supply only of PVC front grill complete all as specified and directed. |
| 62 | Supply onlyof Piano switch (5/6 Amp) suitable for desert cooler complete all as specified and directed. (Make :-Anchor/ABB/Havelles) |
| 63 | Supply only of sprinkle pipe, PVC heavy duty 15 mm dia with tee, elbow etc. for 24\"/18\" sweep desert cooler complete all as specified and directed. |
| 64 | Supply onlyofPVC distributor suitable for 15 mm dia PVC Pipe, PVCelbow & connection of PVC pipe from pump to distributor suitable for 18\"/24\" sweep desert cooler complete all as specified and directed. |
| 65 | Supply Onlyof PVC connection 15 mm dia with brass ferule both and length 600 mm complete all as specified and directed. |
| 66 | Supply only of PTMT float valve , 15 mm dia complete all as specified and directed. |
| 67 | Supply only of copper conductor twin core PVC insulated and sheathed cable size 1.50 sqmmISI mark for pannel wring of desert cooler complete all as specified and directed. |
| 68 | Supply only of copper conductor three core PVC insulated and sheathed cable size 1.50 sqmmISI mark for pannel wring of desert cooler complete all as specified and directed. |
| 69 | Supply only of PVC pipe heavy duty 15 mm dia for desert cooler pump to distributor complete all as specified and directed. |
| 70 | Supply only of replacement submersible pump for desert cooler single phase, 1/40 HP,230volts complete all as specified and directed. |
| 71 | Supply only of Exhaust fan blades 18\"/20\" sweep heavy duty(as per sample) complete all as specified and directed. |
| 72 | Supply only of wood wool pad (As per sample) suitable for desert cooler325 mm to 500mm sweep complete all as specified and directed. |
| 73 | M&L for renewal of kit fan, motor, single phase, 230 volt AC, 1/3 HP, complete with blade arm 18\"sweep size suitable for desert cooler complete all as specified and directed. (Make:- Crompton /Champion /Summer Cool/Usha) |
| 74 | M&L renewal of exhaust fan motor, single phase, 230 volt AC, 1/3 HP, complete with blade arm 18\"/20\"sweep size suitable for desert cooler complete all as specified and directed. (Make:- Champion/Crompton greaves/Khaitan/Usha) |
| 75 | Taking out defective burnt exhaust fan offollowing sweep and of any makeand transporting tocontactor\"s workshop, opening of exhaust fan/taking out rotor and cutting out the burnt winding and cleaning the slots and rewinding of the same with the existing size of super enameled copper winding wire including insulation varnishing, greasing, reassembling testing and fixing in position 18\"/24\" size (exhaust fan) complete all as specified and directed. |
| 76 | S&F in repairs worn out wiremesh rectangular / square fitted with all the three side panels of desert cooler of 15\"/24\" any makemade out of 24 SWG 10mm apertureincluding rivetting and renewing the cut wood pads complete all as specified and directed. (Renewal of Wood pads shall be measured and paid separately). |
| 77 | Renewal of set of panels made out of PGI sheet24 gauge thick with wood wool pads, in required quantity duly filled complete all as specified and directed. |
| 78 | Renewal of desert cooler body, suitable for 450 mm/500 mm sweep exhaust fan, made out of 24 gauge PGI sheet with front grill and side panel with switch regulator complete all as specified and directed. (Make :- Champion/Summerking). |
| 79 | Taking out carefully 325 to 500/600 mm sweep desert cooler from its existing position from stand or pillar, removing the side panels, taking out cut wood pads or loose pads and disposed to a distance not exceeding 50 metres away as directed by EIC and spray painting with synthetic enamel paint of approved color (inside and outside) including one coat of black japan paint in side the base of tank tank after preparation of old painted surfaces and reassembling and fixing in position complete all as specified and directed. |
| 80 | Repairing of leakage of tank by brazing/solderingof any size of desert cooler, testing the leakage water complete all as specified and directed. |
| 81 | M&L for fabrication of GI water storage tank for desert coolerof 18\"/24\" any makemade out of 24 SWG 10mm apertureincluding rivetting brazing /soldering including painting with two coat of (black) enameled paint over a coat of red oxide primer and installed at locations complete all as specified and directed. |
| 82 | Dismantling of existing repairablewater coolerof any make and capacity from its position after disconnecting electric connections, for carrying out repairs and renewal/ replacements of Parts, reassembling andinstallation of the same on same location and making electric connection etc. complete all as specified and directed.(Note :- Parts renewed shall be measured and paid separately under appropriate item(s) listed herebelow. |
| 83 | Supply only ofCP pipe connectorincluding flange, screw, CP nozzle of nipple, female nozzle and extention complete all as specified and directed. |
| 84 | Supply only of blower motor with bladeAC 240 volts, 50 HZ single phase, of 1/10 hp capaciites complete all as specified and directed. |
| 85 | Supply only of blower motor with bladeAC 240 volts, 50 HZ single phase, of 1/16 hp capaciites complete all as specified and directed. |
| 86 | Supply only of blower motor with bladeAC 240 volts, 50 HZ single phase, of 1/8 hp capaciites complete all as specified and directed. |
| 87 | Supply only ofblower motor with bladeAC 240 volts, 50 HZ single phase, of 25 watts capaciitescomplete all as specified and directed. |
| 88 | Supply only of aluminium fan blade of blower motor of 1/16 HP complete all as specified and directed. |
| 89 | Supply only ofPVC fan blade of blower motor of 1/8 HP complete all as specified and directed. |
| 90 | Supply only of PVC fan blade of blower motor of 1/10 HP complete all as specified and directed. |
| 91 | Supply and fix in repaircondensing coil for 150 litres Capacity water cooler of any make complete all as specified and directed. |
| 92 | Supply and fix in repaircondensing coil for 60/120 litres Capacity water cooler of any make complete all as specified and directed. |
| 93 | Supply onlyCP Brass push cock(inner or outer threaded) of 15 mm bore size complete all as specified and directed. |
| 94 | Supply only of 32 mm PVC pipe with clip and strainer tee Elbow complete all as specified and directed. |
| 95 | Supply only of starting relay for 1 TR water cooler complete all as specified and directed. |
| 96 | Supply only of starting relay for 1/3 TR water cooler complete all as specified and directed. |
| 97 | Supplyonly of runnuing capacitor (conforming to IS:2993 - 1975) AC 230 volts in plastic container 6 mfd complete all as specified and directed. |
| 98 | Supply only ofcapacitor for blower motor of water cooler of 2.5 Mfd capacity complete all as specified and directed. |
| 99 | Supply onlyof capacitor for blower motor of water cooler of 4.00 /6.00Mfd capacity complete all as specified and directed. |
| 100 | Supply only of running capacitor(conforming to IS:2993 - 1975) AC 440 volts in plastic containerof 10 mfd capacities complete all as specified and directed. |
| 101 | Supply only of running capacitor(conforming to IS:2993 - 1975) AC 440 volts in plastic containerof 36 mfd capacities complete all as specified and directed. |
| 102 | Supply only of overload protector for 1.00 TR compressor complete all as specified and directed . |
| 103 | Supply only of overload protector for 1/3TR compressor complete all as specified and directed . |
| 104 | Supply only of Thermostat long tail for water cooler complete all as specified and directed. |
| 105 | Supply only of Thermostat short tail for water cooler complete all as specified and directed. |
| 106 | Supply only of gas filter, flare type, 3/\"x 1/2\" flare, complete all as specified and directed. |
| 107 | Supply only offloat valve , 15 mm bore of brass with nipple and polyethylene float ball complete all as specified and directed. |
| 108 | M&L for disconnecting of water cooler of 150 litres capacities from its position, taking out water from its water tank, cleaning of water tank by washing with washing powder and with fresh water externally and internally andspray painting with synthetic enamel paint of approved tint/colour to all painted surface of water cooler of following capacities after preparation of old painted surfaceswithout disturbing the components & wiring etc. complete and reconnceting complete all as specified and directed. |
| 109 | All as per item No 108 above but for 40 / 80 Litres capacities of water coolers |
| 110 | All as per item No 108 above but for 60 / 120 Litres capacities of water coolers |
| 111 | Checking of leakage in refrigerant system of water cooler of 150 litrescapacity by putting nitrogen under pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuumising the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed. |
| 112 | Checking of leakage in refrigerant system of water cooler of 60/120 litrescapacity by putting nitrogen under pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuumising the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed. |
| 113 | Checking of leakage in refrigerant system of water cooler of 40/80 litrescapacity by putting nitrogen under pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuumising the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed. |
| 114 | Transporting defective blower motor of 1/ 16 HP capacities from AGE E/Myard to contractor\"s workshop, dismantling the burnt winding & rewinding of blower motor with the existing size super enameled copper winding wireincluding insulation, varnishing, greasing, testing and transporting back to AGE E/M yard for refixing at the site complete all as specified and directed. |
| 115 | All as per item No 114 above but for capacity of 1/8 HP |
| 116 | Dismantling of unserviceable compressor of any make/brand from water cooler including disconnecting suction / Discharge copper tubing andSupply&fixing new compressor(sealed unit) with nuts, bolts, rubbers grommet and washer, connecting copper tubing by welding flare nuts, detecting leak and repairs if any flushing and pressure testing by nitrogen & etc. vacuumising, charging with non CFC refrigerant gas matching with R-22, of 1 TR Capacity ( Make Emmerson Model HR-13) or equivalent of other specified make& Modelcomplete all as specified and directed. |
| 117 | Taking out compressor from water cooler of any make by cutting of suction and discharge lines for carrying out necessary repairs to the water cooler base such as renewal of MS angle iron , base plate, nuts , washers, bolts,compressor rubber grooves and refixing it including N2 flashing and charging of refrigerent with non CFC refrigerant gas matching with R-22 in required quantities and testingof 120/150 litres capacities of water coolers complete all as specified and directed. (Make Make Emmerson Model KCJ 34) |
| 118 | Taking out compressor from water cooler of any make by cutting of suction and discharge lines for carrying out necessary repairs to the water cooler base such as renewal of MS angle iron , base plate, nuts , washers, bolts,compressor rubber grooves and refixing it including N2 flashing and charging of refrigerent with non CFC refrigerant gas matching with R-22 in required quantities and testingof 40/80 litres capacities of water coolers complete all as specified and directed. (Make Make Emmerson Model KCJ 444) |
| 119 | Dismantling of existing repairablerefrigerator any make and capacity from its position after disconnecting electric connections, for carrying out repairs and renewal/ replacements of Parts, reassembling andinstallation of the same on same location and making electric connection etc. complete all as specified and directed.(Note :- Parts renewed shall be measured and paid separately under appropriate item(s) listed herebelow. |
| 120 | Supply only starting relay, open type for refrigerator of capacity 165/300/310 litres complete all as specified and directed. |
| 121 | Supply onlyover load protector for 1/6 HP refrigerator of capacity 165/300/310 litres complete all as specified and directed. |
| 122 | Supply onlythermostat defrost type for refrigerator complete all as specified and directed. |
| 123 | Supply onlys thermostat non defrost type for refrigerator complete all as specified and directed. |
| 124 | S&F in reapairPCB for 300/310 ltr refrigerators, complete all as specified and directed. (Make-Samsung/LG or others as required) |
| 125 | S&F in repair PCB for 300/310 ltr refrigerators (Inverter type), complete all as specified and directed. (Make-Samsung/LG or others as required) |
| 126 | S&F in repair Freezer for capcity 165/180/210 ltrs complete all as specified and directed. (Make-Samsung/LG or others as required) |
| 127 | S&F in repair Freezer for capcity 300/310 ltrs complete all as specified and directed. (Make-Samsung/LG or others as required) |
| 128 | S&F condensing coilof 165/190/195 litres capacitiesrefrigerator by disconnecting condensing coil from refrigerator, N2 pressure testing and flushing out the system and charging ofNon CFC gas as per required quantity and testing complete all as specified and directed. |
| 129 | All as per item 128 above but for capacity of 286/300/310 ltrs (1/6 TR) refrigrators |
| 130 | Checking of leakage in refrigerant system ofrefrigerator of 165/190/195 litrescapacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed. |
| 131 | Checking of leakage in refrigerant system ofrefrigerator of 286 /300/310 litrescapacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed. |
| 132 | Taking down unsv compressor from the regrigerator and Supply and fixing new sealed unit compressor suitable for 165/190/195 litres refrigerator (1/8 TR) capacities , charging with gas and making connections and testing complete all as specified and directed. (Make- LG/Whirlpool/Samsung/Godrej) |
| 133 | All all as per item No 132 above but for capacity of 286/300/310 ltrs (1/6 TR) refrigrators |
| 134 | Dismantling of existing repairableDeep freezer any make and capacity from its position after disconnecting electric connections, for carrying out repairs and renewal/ replacements of Parts, reassembling andinstallation of the same on same location and making electric connection etc. complete all as specified and directed.(Note :- Parts renewed shall be measured and paid separately under appropriate item(s) listed herebelow. |
| 135 | Supply onlystarting relay for 200 Ltr. Capacity deep freezer complete all as specified and directed. |
| 136 | Supply only starting relay for 300 Ltr. Capacity deep freezer complete all as specified and directed. |
| 137 | Supply only over load protector suitable for 200/300 Ltr deep freezer complete all as specified and directed. |
| 138 | Supply only running capacitor for 200/300 Ltr capacity deep freezer complete all as specified and directed. |
| 139 | Supply only thermostate suitable for 200/300 Ltr. Capacity deep freezer complete all as specified and directed. |
| 140 | Supply only starting capacitor for 200/300 Ltr. Capacity deep freezer complete all as specified and directed. |
| 141 | Taking down defective compressor of following capacity of deep freezer of any Make and depositing ,supply andfixing sealed unit compressor as specified here underincluding brazing and with necessary nuts and bolts, copper filter, capalary and supply & charging of refgn Gas Non CFC in required Qty and testing 200 Litres capacity deep freezer compressor Model No. KCN 372 of Kirloskar complete all as specified and directed. |
| 142 | All as per item No 141 above but 300 Litres capacity deep freezer compressor Model No. KCN 411 of Kirloskar |
| 143 | Checking of leakage in refrigerant system of deep freezer of 200 / 300 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity complete all as specified and directed. |
| 144 | Renewal of Fan Motor with blade of deep freezer, 230Volts rating, AC, Single Phase, 50 Hzincluding disconnection and reconnecting and testing complete all as specified and directed. |
| 145 | Taking down unserviceable voltage stablizers ofany make of following capacities and dismantling the stablizers of any size for repair of the defective parts/spares & ressembling including repairs of defective screws, rubber shose testing complete all as specified and directedNote:- Spare parts measured and paid seprately |
| 146 | Supply only relay 25/30 Amps 24 volts for 4 KVA/5KVA voltage stablizers complete all as specified and directed. |
| 147 | Supply only main PCB with high & low voltage cut off suitable for 4 KVA/5 KVA voltage stablizers of any make complete all as specified and directed. |
| 148 | Supply only 2 mtr long copper cable 3 core PVC insulated and sheathed 80/.20(2.5 Sqmm) size duly fitted with 3 pin top 20 Amps complete all as specified and directed. |
| 149 | Supply only power transfromers suitable for voltage stablizers of capacity 4/5 KVAcomplete all as specified and directed |
| 150 | Supply only AC volt meter square/round type 0-300 volts suitable for 5/4 KVA single phase voltage stablizers complete all as specified and directed |
| 151 | supply and fix in repair of dimmer type transfromer for 4KVA/5KVA Voltage stablizers complete all as specified and directed |
| 152 | Supply and Fix in repair copper capillary of size 0.60 mm complete all as specified and directed |
| 153 | Supply and fix in repairPolycarbonate Plug top 3 pin 16 Amp complete all as specified and directed. Make :- Anchor/ABB/Havelles/C&S . |
| 154 | Supply and fix in repair Polycarbonate Plug top 3 pin 5/6 Amp complete all as specified and directed. Make :- Anchor/ABB/Havelles/C&S |
| 155 | Dismantling of unserviceable compressors of4 TRcapacitiesincluding disconnecting suction / discharge copper tubing and S&F compressor scroll type with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make –Carrier/ Kirloskar/ Blue star |
| 156 | Dismantling of unserviceable compressors of4 TRcapacitiesincluding disconnecting suction / discharge copper tubing and S&F compressor scrolltype with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make –Carrier/ Kirloskar/ Blue star |
| 157 | Dismantling of unserviceable compressors inverter type of 1.5 TRcapacitiesincluding disconnecting suction / discharge copper tubing and S&F new compressor rotary inverter typetype with nuts, bolts, rubber grommet and washer, connecting copper tubing by welding, flare nuts, rectifying leak and repairs if any, flushingby nitrogen & etc, Vacuumising, charging with refrigerant gas Non CFC complete all as specified and directed.Note :- (i)The electrical accessories required will be measured and paid for separately. (ii) The compressor of make –Model No KTN130D42UFZ and Equivalent of other make and model Carrier/ Kirloskar/ Blue star |
