Tender For Supply Of Workshop Tools--1 Vernier Caliper with fine adjustment Screw, Size-300mm, Make- Mitutoyo 2 Vernier Caliper digital, Size-300mm, Make- Mitutoyo 3 Master Level + 0.02mm accuracy, Size- 6 Inch, Make- Mitutoyo 4 Dial Test Indicator with Magnet Stand, Make- Mitutoyo 5 Surface Block with adjustable screw, Size- 12 Inch, Make- Mitutoyo 6 Flat File Rough bastard cut, Size- 14 Inch, Make- J.K (J.K Super drive) 7 Flat File Rough smooth cut, Size- 14 Inch, Make- J.K (J.K Super drive) 8 Half Round File Rough, Size- 14 Inch, Make- J.K (J.K Super drive) 9 Square File Rough bastard cut, Size- 14 Inch, Make- J.K (J.K Super drive) 10 Triangular File Rough bastard cut, Size- 6 Inch, Make- J.K (J.K Super drive) 11 Outside Caliper S.S, Size- 6 Inch, Make- Sumit Tools 12 Inside Caliper S.S, Size- 6 Inch, Make- Sumit Tools 13 Steel Rule- 300 mm for industrial use, Make- Freemans 14 Measuring Tape- 5 Mtr, Make- Freemans 15 Measuring Tape- 3 Mtr, Make- Freemans 16 Painting Brush, Size- 3 Inch, Any Good Quality 17 Painting Brush, Size- 5 Inch, Any Good Quality 18 Painting Brush, Size- 6 Inch, Any Good Quality 19 H.S.S Tool Bit, Size- 1” x 8”S-500 , Make- Miranda 20 H.S.S Tool Bit, Size- 1/2” x 6”S-500 , Make- Miranda 21 H.S.S Tool Bit, Size- 3/8” x 6”S-500 , Make- Miranda 22 Power Hexa Blade H.S.S 6 T.P.I, Size- 350 x 32 x 1.60mm, Make- Miranda 23 H.S.S Center Drill, Size- 5mm , Make- Addison 24 H.S.S Drill Tapered shank, Size- 5/8 Inch, Make- Addison 25 H.S.S Drill Tapered shank, Size- 10.7 mm, Make- Addison 26 H.S.S Drill Tapered shank, Size- ¾ Inch, Make- Addison 27 H.S.S Drill Tapered shank, Size- 17/32 Inch, Make- Addison 28 H.S.S Drill Tapered shank, Size- 21/32 Inch, Make- Addison 29 H.S.S Drill Tapered shank, Size- 8mm, Make- Addison 30 H.S.S Bolt Tap B.S.W, Size- 5/8 Inch, Make- Addison 31 H.S.S Bolt Tap B.S.W, Size- 3/4 Inch, Make- Addison 32 H.S.S Bolt Tap B.S.W, Size- 1/2 Inch, Make- Addison 33 H.S.S Bolt Tap B.S.W, Size- 3/8 Inch, Make- Addison 34 H.S.S Die Nut, Size- 3/4 Inch, Make- Addison 35 H.S.S Die Nut, Size- 1/2 Inch, Make- Addison 36 H.S.S Die Nut, Size- 3/8 Inch, Make- Addison 37 H.S.S Die Nut, Size- 5/8 Inch, Make- Addison 38 Grinding Wheel, Rough, Size- (OD-250mm, ID-31.75mm, Width-25mm), Make- Carborandom 39 Carbid Grinding Wheel, Size- (OD-250mm, ID-31.75mm, Width-25mm), Make- Carborandom 40 C Clamp, Size- 6 Inch 41 V- belt, B-71, Make- Fenner 42 V- belt, C-60, Make- Fenner 43 V- belt, C-71, Make- Fenner 44 Roller Grooving Tool with angular carbide tip angle 400 , Make- Precision tools 45 Roller Grooving Tool with angular carbide tip angle 350, Make- Precision tools 46 Knurling Tool 47 H.S.S End Mill Cutter, Size- 10mm 48 H.S.S End Mill Cutter, Size- 12mm 49 Roller Mesh Chart grooving tool 6mm 50 Carbide insert turning holder left and right side V Shape, Size- 10 Inch 51 Carbide Insert Tool Holder ( Insert Size-1/4 Inch) 52 Carbide Insert Tool, V-Shape, v nmg 160404 Size-1/2 Inch 53 Carbide Insert Boring Tool, Holder Size- 10 Inch 54 M.S Square Rod, Size- 1” x 1” x 6 Mtr 55 M.S Square Rod, Size- 40mm x 40mm x 6 Mtr 56 M.S Square Rod, Size- 20mm x 20mm x 6 Mtr 57 M.S Square Rod, Size- 18mm x 18mm x 6 Mtr 58 M.S Square Rod, Size- 14mm x 14mm x 6 Mtr 59 M.S Square Rod, Size- ½” x ½” x 6 Mtr 60 M.S Square Rod, Size- 8mm x 8mm x 6 Mtr 61 EN-8 Rod, Size-32mm, Length-6 Mtr(M.T.C Required) 62 EN-8 Rod, Size-38mm, Length-6 Mtr(M.T.C Required) 63 EN-8 Rod, Size-45mm, Length-6 Mtr(M.T.C Required) 64 EN-8 Rod, Size-50mm, Length-6 Mtr(M.T.C Required) 65 EN-8 Rod, Size-60mm, Length-6 Mtr(M.T.C Required) 66 EN-8 Rod, Size-65mm, Length-6 Mtr(M.T.C Required) 67 EN-8 Rod, Size-70mm, Length-6 Mtr(M.T.C Required) 68 EN-8 Rod, Size-80mm, Length-6 Mtr(M.T.C Required) 69 EN-8 Rod, Size-100mm, Length-6 Mtr(M.T.C Required) 70 EN-8 Rod, Size-120mm, Length-6 Mtr(M.T.C Required) 71 Brass Rod, OD- 2 Inch, Length- 3 Mtr(MTC Required) 72 Brass Rod, OD- 2.1/2 Inch, Length- 3 Mtr(MTC Required) 73 H.T Bolt Full Thread with Nut, Size- 5/8” x 10”, Make- Unbrako
