Tender For Providing And Fixing Of Children Playing Equipments At Various Places In Municipal Area Rishabdev (Arc), Udaipur-Rajasthan

Providing And Fixing Of Children Playing Equipments At Various Places In Municipal Area Rishabdev ( Arc ) -Providing And Installation Of Multi Action Play System & Other Children Playground Equipments Consisting Of The Following Items The Area Of 8 Mtr X 7 Mtr And Required Safe Area Is 9 Mtr X 8 Mtr ( 1 ) . Square Deck 5 Feet Height - The Platform Is Made In Fiber Reinforced Plastic. The Top Of Platform Is Anti Skid Surface With Multi Colour Pigmented Resin .The Back Coat Of Fiber Reinforced Plastic Is Such That The Mat Strands Are Not Visible And The Surface Is Tack Free. At The Top Of The Deck There Is A Window Canopy Shade To The Children Playing On It. ( 2 ) .Wave Slide 5’ Height - The Wave Slide Chute With Top Entry Module Shall Be Made By Frp, The Slide Thickness Thickness Will Be 5 Mm With Uv Pigment To Avoid Colour Fading.. The Wave Shape Is Given In Such A Manner That It Will Not Give Any Jerk Or Bump To The Rider. The Chute Has Its End Such As It Causes Safe Landing Of The Child. The Landing Portion Is Horizontal With Respect To The Ground. ( 3 ) . Frp Straight Slide 5 Feet Height-The Straight Slide Chute With Top Entry Module Shall Be Made By Frp, The Slide Thickness For Total Will Be 5 Mm For Both Side Finished ( 4 ) . Rock Climber 5’ Ht. The Rock Climber Is Made Up Of Fiber Reinforced Plastic. Rocks Are Molded On Same Platform And It Has Gradient From The Ground. The Climber Is Supported By 25 Idgi Pipe At The Bottom For Ground Support. ( 5 ) Steel Bridge 8’ Long-The Steel Bridge Is Made From 40X40x5 With Crc Sheet 18 Gej& Laminated By Frp Non Skidchequred Sheet .It Has Railing Made From Frp Molded Process With Support Of 20 Nb Gi Pipe With The Help Of 80 Idgi Pipe And 80 X 20 Nb Nylon Clamps. ( 6 ) . Frp Canopy- Square Canopy Should Be Made Up Of Fiber Glass Reinforced Plastic With 3 To 4 Mm Thickness With Glossy Finish And Paint By Pu Paint In Multy Colors. ( 7 ) .Frp Ladder 5 Feet Height- Frp Ladder Should Be Made By Fiber Glass Reinforced Plastic With 4 To 5 Mm Thickness With Antiskid Surface. ( 8 ) . Frp Railing - The Railing Is Made In Frp Molded Process .The Railings Are Attached To Each Other With The Help Of 20 Idgi Pipe. ( 9 ) . Hand Railing- Hand Railing Should Be Made By 20 Mm Idgi Pipe To Proper Control For Children’S. There Is No Any Sharp Corner Not Seen On The Railing. ( 10 ) . Frp Rindeer Andfrp Flower- This Is Made From Fiber Glass Reinforced Plastics For The Attraction. ( 11 ) . Double Swing With Frp Butterfly-The Leg Support Of Double Swing Is Made By 60 Mm Idgi Pipe While The Top Bar Is Of 60 Mm Idgi Pipes. The Gi Pipes Are Powder Coated. The Swing Seats Are Made From 9 Mm Thick Antiskid Chequered Reinforced Rubber Belt Or 9 Mm Thick. Frp Seating Arrangement. The Ball Bearings Are Mounted Inside A Specially Designed Clamp. ( 12 ) . Spiral Climber 5 Feet Height-Spiral Climber Made Up Of 25 Nb Gi Pipes. The Spiral Structure Is Suitably Bent And Is Kept Standing With Vertical 40 Idgi Pipe Support. All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments And As Per Direction Given By Eic 2 Providing And Installation Of Hanging Climber:- Safe Play Area -3.4 Mtr. X 2.2 Mtr. Dia Area: - 2.4 Mtr. 1.2 Mtr. Height- 2.4 Mtr. It Required Area 2.4 Mtr X 1.2 Mtr& Height 2.4 Mtr And Leg Support Should Made Up Of 50 Mm Idgi Pipe Outer Frame Should Be Made By 32 Mm Idgi Pipe In Main Frame Joint With 20 Mm Idgi Pipe In Handrails / Inner Frame In Dia. Ladder Should Be Made By 20 Mm Idgi Pipe. And Connected With Proper Fitment Like Welding, Fastener.All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments.And Install By C.C. Base System As Per Order By Engineer In Charge Age Capacity 6-12 Year And As Per Direction Given By Eic 3 Providing And Installation Of Snake Climber: - Safe Play Area -4.5 Mtr. X 2.0 Mtr. Area : 3.6 X 1.0 Mtr Height- 2.4 Mtr Its Height 2.4 Mtr. And Length Should Be 3.6 Mtr. And Width Should Be 1.0 Mtr. And Made By 50 Mm Idgi Pipe In Vertical Support And 32 Mm Nb Pipe In Outer Frame. Handrails Should Be Made By 25 Mm Idgi Pipe. Leg Support Should Be 50 Mm Idgi Pipe. Ladder Should Be Made By 20 Mm Idgi Pipe.All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments.And Install By C.C. Base System As Per Order By Engineer In Charge Age Capacity 3-8 Year And As Per Direction Given By Eic 4 Providing And Installation Of Swing Double Seater : - Safe Play Area -4 Mtr. X 2.5 Mtr. Area: - 3 Mtr. X 1.5 Mtr. Height- 2.4Mtr Its Total Required Area 3 Mtr. X 1.5 Mtr. And Height Shall Be 2.4 Mtr. From Ground Level Top Bar Of Swing Is Made By 60Mm Idgi Pipe. And 4 Nos. Of Leg Support Pipe Should Be 60Mm Idgi Pipe.Top Bar Attach With 2 Nos. Of Alloy Steel Coasting Bearing With Gi Chain. Seating Arrangement Of Swing Is Made Up Of 10Mm Thick. Anti Skidchequered Reinforced Rubber Belt. Bearing Should Be Covered By Specially Design Nylon Clamp. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments.And Install By C.C. Base System As Per Order By Engineer In Charge And As Per Direction Given By Eic 5 Providing And Installation Of Eaglesee Saw:- Safe Play Area – 2.5 Mtr. X 3.5 Mtr. Area – 1.5 Mtr. X 2.5 Mtr. Height – 0.8 Mtr. It’S Required Area 1.5Mtr X 2.2Mtr. Main Frame Should Be Made By 80Mm Idnb Centre Pipe With Proper Fitment For Installation Of See Saw.Handle Should Be Made By 25 Mm Idnb Pipe. Total Height 0.5Mm From Ground Level. 2 Nos. Of Sheet Made By 3 Mm Thick Frp With Proper Seating Arrangement Grouted In Cc. Foundation Base All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments And Install By C.C. Base System As Per Order By Engineer In Charge Age Capacity 6-12 Year And As Per Direction Given By Eic 6 Providing And Installation Of Orbit Climber:- Safe Play Area -3.4 Mtr. X 2.2 Mtr. Dia Area: - 2.4 Mtr. 1.2 Mtr. Height- 2.4 Mtr. It Required Area 2.4 Mtr X 1.2 Mtr& Height 2.4 Mtr And Leg Support Should Made Up Of 50 Mm Idgi Pipe Outer Frame Should Be Made By 32 Mm Idgi Pipe In Main Frame Joint With 20 Mm Idgi Pipe In Handrails / Inner Frame In Dia. Ladder Should Be Made By 20 Mm Idgi Pipe. And Connected With Proper Fitment Like Welding, Fastener.All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments.And Install By C.C. Base System As Per Order By Engineer In Charge Age Capacity 6-12 Year And As Per Direction Given By Eic 7 Providing And Installation Of Circular Swing :- Safe Play Area:-2.5 M X 3 M The Area :-1.5 M X 2 M The Leg Support Of This Item Is Made Up Of 40 Mm, While The Top Bar Is From 50 Mm Powder Coated Gi Pipes. The Swing Frame Is Made From 25 Mm And 15 Mm Powder Coated Gi Pipes. There Are Two Seats Provided Which Are Made Out Of Fiber Reinforced Plastic. The Platform Is Made Using Chequered Plate For Footrest And Bearing Assembly Is Made. All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments. Slide Should Be Made In A Single Mould Piece There Is No Any Joint In The Slide.Frp Components Should Be Paint By 3 Layers Of Pu Paint. And Install By C.C. Base System As Per Order By Engineer In Charge. All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating ( Oven Baked ) Done On The Pipes Extend The Life Of Equipments. And Install By C.C. Base System As Per Order By Engineer In Charge Age Capacity 3-10 Year And As Per Direction Given By Eic 8 Providing And Installation Of Platform ( Gi Platform ) Marry Go Round Having Product Area 5.0 M Product Height 1.1 M Safe Paly Area 2.5 Mts With Age Limit 5-12 Year And As Per Direction Given By Eic

INR 500 /-

INR 29980.0 /-

INR 14.99 Lakhs /-