Bids Are Invited For Custom Bid For Services - Renovation Works 1 ) Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Sizederived From Natural Sources ) . Qty:-1.16 Cum 2 ) Reinforced Cement Concrete Work In Vertical And Horizontal Fins Individually Or Forming Box Louvers, Facias And Eaves Boards Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1½:3 ( 1 Cement : 1½ Coarse Sand ( Zone-Iii ) Derived From Natural Resources : 3 Graded Stone Aggregate 20Mm Nominal Sizederived From Natural Resources ) . Qty:-0.10 Cum 3 ) Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : A ) Suspended Floors, Roofs, Landings, Balconies And Access Platform & Shelves ( Cast In Situ ) Qty:- 5.72 Sqm. B ) Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. Qty:- 0.74 Sqm C ) Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards. Qty:- 2.82 Sqm D ) Stairs, ( Excluding Landings ) Except Spiral-Staircases. Qty:- 34.00 Sqm. 4 ) Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. A ) Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 155.00 Kg 5 ) Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. A ) Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) Qty:- 10.21 Sqm 6 ) Providing And Fixing Factory Made Upvc White Colour Sliding Glazed Window Upto 1.50 M In Height Dimension Comprising Of Upvc Multi-Chambered Frame With In-Built Roller Track And Sash Extruded Profiles Duly Reinforced With 1.60 ± 0.2 Mm Thick Galvanized Mild Steel Section Made From Roll Forming Process Of Required Length ( Shape & Size According To Upvc Profile ) , Appropriate Dimension Of Upvc Extruded Glazing Beads And Upvc Extruded Interlocks, Epdm Gasket, Wool Pile, Zinc Alloy ( White Powder Coated ) Touch Locks With Hook, Zinc Alloy Body With Single Nylon Rollers ( Weight Bearing Capacity To Be 40 Kg ) , G.I Fasteners 100 X 8 Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Note: For Upvc Frame And Sash Extruded Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable: Three Track Three Panels Sliding Window With Fly Proof Ss Wire Mesh ( Two Nos. Glazed & One No. Wire Mesh Panels ) Made Of ( Small Series ) Frame 92 X 44 Mm & Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension ( Area Of Window Upto 1.75 Sqm ) . Qty:- 1.66 Sqm 7 ) Granite Work Of Granite Stone Slab Colour Black, Cherry / Ruby Red Gang Saw Cut ( Polished And Machine Cut ) Of Thickness 18 Mm For Wall Lining , Backing Filled With A Grout Of Average 12 Mm Thick In Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Including Pointing With White Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With An Admixture Of Pigment To Match The Granite Shade ( To Be Secured To The Backing By Means Of Cramps ) Area Of Slab Over 0.50 Sqm Qty:- 88.24 Sqm 8 ) Stone Tile Work For Wall Lining With Special Adhesive Over 12Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Cement Slurry @ 3.3 Kg / Sqm Including Pointing In White Cement With An Admixture Of Pigment To Match The Stone Shade. 8Mm Thick ( Mirror Polished And Machine Cut Edge ) .Qty:- 8.70 Sqm
