Tender For Supply Of Fully Automatic Star Delta Starter, hyderabad-Telangana

Supply Of Fully Automatic Star Delta Starter Supply Of Fully Automatic Star Delta Starter As Per Enquiry Sheet Attached. , Fully Automatic Star Delta Starter Existing Pump Motor Details: Make : Kirloskar Electric Co. Ltd , Bangalore M/C No : 29811077-1 Frame: Scx355x Motor: 3Phase Induction Motor Output : 225 Kw/2 Pole Current: 450 Amps Rpm: 2981 Voltage: 415+/- 10% Frequency : 50+/-5% Scope Of Material Supply (Total 24 Points - Please Scroll Down Or Refer Enquiry Sheet): 1.Fully Wired Automatic Star/Delta Starter Panel For Above 225Kw Pump Motor With Class 30 Overload Relay Protection, Quantity:01 2.Fabrication With Crca Sheet 14/16 Gauge, Base Frame 3.630 Amps(Type Dn3-630M Of L&T Make) Tp Mccb 36 Ka With Rotary Handle, Quantity:01 4.Power Contactors Of Current Rating 400 Amps. Quantity : 3 Nos , Contactors Specification:Mnx 400, L&T Make 5.Star /Delta Electronic Timer/Timers, With Timer Ranging From 0 To 60 Seconds Or More. 6.Electronic Class 30 180-300A Ct Operated Thermal Over Load Relay (Base Mounting) With Inbuilt Single Phase Protection (Ml12-L&T) 7.Push Buttons For Start / Stop 8.On/Off/Trip Indication Lamps For On, Off And Trip. 9.Control Mcb 10.400/5 Amps Ct’S With Burden Sufficient For Overload Relay And Transducer. Quantity: 3Nos 11.On, Off And Trip Potential Free Contacts For Remote/Dcs. 12.24V Dc Interposing Relays For Controlling Start/Stop Operations From Remote/Dcs. 13.In The Panel Separate Tb Should Be Provide With Provision To On, Off Commends As Input From Dcs/Plc And Ready To Start (From Local Remote Switch), On, Trip Feedback As Output To Dcs/Plc With 20 % Spare Tbs. 14.Local/Remote Changeover Switch Required. 15.All The Cabling Should Be Done With Proper Ferrules And Lugs. 16.Current Transducer Rating (0-5 Amps/4-20 Milli Amps). 17.The Panel Shall Be Free Standing Floor Mounting Type 18.Unless Otherwise Specified, The Outer Paint Shall Be Siemens Gray 19.Suitable Hooks Shall Be Provided For Lifting The Panel. 20.Detailed Wiring Diagram Is To Be Provided. 21.Testing: The Testing Of The Panel Is In The Scope Of The Vendor And To Be Tested At Bhel/R.C.Puram Site After Supply. 22.Earthing: Proper Internal Earthing Is To Be Provided For The Panel. 23.Suitable Lugs And Cable Glands Are In The Vendor Scope And Power Supply Cable Will Be Provided By Bhel. 24.Vendor Has To Quote Lump Sum Amount Including All Charges.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	23-05-2023	Due date extension till 30.05.2023	Date	30-05-2023
2	30-05-2023	Due date extension till 06.06.2023	Date	06-06-2023

Refer document

Refer document

Refer document