Supply Of Furniture Items To Government Medical College At Suryapet In Suryapet District.=150 Student Cot With Mattress & Pillow 1 Scope: This Specification Is For The Requirement Of Iron Cots Suitable For General Purpose In Hospitals. 1.1 Dimensions 2.1 Over All Dimensions Of Cot Of Size Top Frame ( Sheet ) Shall Be Length 1910 Mm, Width 910 Mm And Height 470 Mm With Bushes. 2.2 The Various Tubes Used In Manufacture Of Iron Cots Should Have The Following Outside Diameter And Thickness. Component Outside Dia ( Mm ) Thickness ( Mm ) A Bows Outer Cr Tubes -38.10.Mm X 1.60Mm B Cross Tubes Cr Tubes 25.40 Mm X 1.22 Mm C Filling Tubes Cr Tubes 19.05 Mm X 1.22 Mm 2.3 The Ms Flat For Top Shall Be Inside All Four Sides Of Size 50X3 Mm Minimum Thickness Of 3.0 Mm. 3 Material: 3.1 Frame Work Shall Be Of Cr Sheets Conforming To Is: 513 D Quality. 3.2 Bows & Tubes: These Shall Be Made From Cr Steel Tubes. 3.3 Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. 4 Manufacture 4.1 Head End: Construction Of The Head End Shall Comply To Meet Requirement Given 4.2 Bows Shall Be Manufactured From Steel Tubes. It Shall Be Bent, With Inside Radius Of Not More Than 125 Mm At Top 2 Corners Cr Sheet Brackets . Bracket Of 3 Mm Thickness, Shall Be Welded With The Bows Vertical Upright Members Which Allows Frame To Rest On It An 4.3 Cross Tube: One Horizontal Cross Tube For Making The Structure Of The Bow Rigid Shall Be Welded Between The Vertical Upright Members Of The Bows. Cross Tube Shall Be Welded Below The Sleeping Level At A Height Of 200 Mm From The Bottom. 4.4 Filling Tubes: The Three Vertical Filling Tubes Shall Be Welded To The Cross Tube And To The Bow. They Should Be Spaced At Regular Intervals. The Height Of The Head End Bow Shall Be About 610 Mm. 4.5 Foot End Bow: It Shall Be Similar To 4.1.1 To 4.1.3 Except Leg Bows, Which Shall Be Of 570 Mm Height. 4.6 Mattress Platform: This Shall Comply With The Requirements Given Below:- The Bed Frame Shall Be Made From C.R. Sheet Double Bent. It Should Be Reinforced With Three Formed Channels To Size 20 X 50 X 50 X 50 X 20 Mm Of 1.25Mm Thickness Flanges Welded Inside The Length Wise. With 3 Years Warranty Finish As Per General Condition Of Tender 100 Almarah Steel Full Size Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding &Ark Welding. Anticorrosion Treated Components. Dimensions Outer: 1980 H X 910 W X 480 D Mm Main Door With Shetters Top, Bottom Lh & Rh Sides, Shelves And Back All Materials Thickness Not Less Than 1 Mm Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside With 5 Compartments. Shelve Size 908 X 430 Mm Crca Steel: Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.0 Mm Range As Per Is-513 1994 ( Reaffirmed In1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. Hot Rolled Steel Used For Thickness 2.0 To 3.15 Mm Range As Per Is-1079 1994 Is-1079 1994 ‘D’ Quality Or Is-10748 1995 Grade-Ii. Chemical Composition, Tensile Properties, Bend Test, Surface Flaws, Roll Mark, Dent & Lines Etc. Weight 80 Kgs Finished General Condition With 3 Years Warranty Finish As Per General Condition Of Tender 100 Chairs For Office 1. Seat / Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Chair Is Available In Three Models. Mid Back Size 47.5 Cm. ( W ) X 58.0 Cm. ( H ) *Pch-9U01rg / 9U02rg / 9U12rg Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene. 4. Center Tilt Synchro Mechanism ( For 9U01rg / 9U02rg ) : The Mechanism Is Designed With The Following Features: · 360° Revolving Type. · 3 Position Locking · Tilt Tension Adjustment 5. Tubular Frame ( For 9U12rg ) : The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Is Cantilever Type & Made Of Ø 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. 6. Pneumatic Height Adjustment ( For 9U01rg / 9U02rg ) : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. 7. Telescopic Bellow Assembly ( For 9U01rg / 9U02rg ) : The Bellow Is 3-Piece Telescopic Type And Injection Moulded In Black Polypropylene. 8. Pedestal Assembly ( For 9U01rg / 9U02rg ) : The Pedestal Is Injection Moulded In Black 33%Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Centre Dia. ( 76.3 ±1.0Cm With Castors ) . 9. Twin Wheel Castors ( For 9U01rg / 9U02rg ) : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Overall Dimensions Of Chair Width ( W ) : 76.3 Cm. Depth ( D ) : 76.3 Cm. Height ( H ) : 85.5-97.5 Cm. Seat Height ( Sh ) : 42.5-54.5 Cm Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 50 Teachers Classroom Table Lecture Table Size: 1500 L X 600 D X 750 Ht System: Angular Legs Specification: Table Top: 25Mm Thick Pre-Laminated Particle Board Finished With 2Mm Pvc Edge Banding On All Exposed Edges. Under Structure: Ms Powder Coated Switch Angular 40X40 Legs And Ms Powder Coated Cross Beams ( 40X20 ) Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge.. 250 Examination Hall Table 1 Dimensions: 750 Mm X 450 Mm X 750 H Mm 2 Material : 2.1 A ) Plb / Plt – Top 2.2 Impregnated Base 18Mm Thickness With 2Mm Thick Hot Pressed Pvc Beading 2.3 C ) Under Structure : This Table Comes With A Square Tube Under Structure With Prime Quality C.R Tube Steel. 3 All Steel Tubes Used For Desk Under Structures Are As Per Is-3601-1984, Is- 7138-1973, Is-4923-1985. 4 Top Frame And Legs :30 X 30 C.R Square Tube 1.2Mm Thickness With One Foot Steps. 5 These Shall Be Manufactured From Pvc Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm With 3 Years Warranty Finish As Per General Condition Of Tender 120 Lecture Hall Dual Desk Bench For ( 2 ) Students Genii 2Strfr+Rr Plt Choco Sm6 1240 X 1130 X 757 Desk-Top Panel-All Panels Are Made From 18Mm Thk Pre-Laminated Twin Board ( E1 / P2 Grade ) With Pvc Edge Banding On All Sides.The Panels Have Cornersrounded For Safety Usage. Understructure - All Side Metal Frames And Cross Connectors Are Made From Combination Of 25.4 X1.2 Mm Thk ( Approx. 18 Swg ) Round Erw Tubes , 31.8 X 1.2 Mm Thk ( Approx. 18 Swg ) Round Erw Tubes And 28.6 X 1.2 Mm Thk ( Approx. 18 Swg ) Round Erw Tubes ( As Per Is:7138 ) Which Are Welded Together.The Welded Structures And Cross Connectors Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating.Back Supports Which Are Provided At The Rear Back Are Made Of 50.8 X 25.4 X 1.2 Mm Thk ( Approx. 18 Swg ) Rectangular Erw Tubes ( As Per Is:7138 ) .The Tubes Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating.The Storage Shelves Are Made From 0.6 Mm Thk Ms Sheet ( As Per Is:513 ) Fixed Below The Radesk Top Panel And Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating. Hooks Are Provided On The Vertical Side Frames On Both Sides Of The Desk For Hanging Bags / Bottles. They Are Made From 2 Mm Thk Ms Sheet ( As Per Is:513 ) And Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating.The Understructure Is Assembled Using M6 Trilobular Screws ( As Per Din 7500 ) With Zn Blue Plating.Compact Laminate Seat And Back Panels Are Assembled Using M6 Counter Sunk Trilobular Screws ( As Per Din 7500 ) With Zn Black Plating ( As Per Is 1573:1986 ) Spacers Are Provided On Th Top Of Round Tubes For Wooden Panels Fixing. They Are Made Of Made Glass Filled ( 30% ) Plastic Caps Made Of Pp Copolymer ( 3530 Grade ) Are Also Provided On The Rear Frames Adding More Aestheic Value To The Product.M6 High Tensile Tvs Make Bolt ( Class 8.8 ) With Glasss Filled Nylon Level Adjustors Are Provided At The Bottom Of Understructure To Take Care Of Unevenness In Floor With Height Adjustment Of Approx 15Mm Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge.. 25 Table ( Office Table Big Size ) 1 Dimensions:1450 W X 680 D X 750 H ( In Millimetres ) 2 Material: 2.1 A.Plb / Plt - Top 25 Mm Thickness. 3 All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. 4 Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) 5 Each Plb / Plt May Contain Following Material Layers: 6 Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. 7 C. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Square Tube 1.22Mm Thickness. 8 D. Storage: 3 Draw & 2 Draw Metal Is Provided For Storage. One Side 2 Draw And Other Side 3 Draw Metal Shall Be Provided. 9 Drawer: • Box-Box-File : Dimensions 390 W X 430 H X 560 D Mm, Construction & Material:Welded Assembled, Crca As Per Is-513.• Back , Sides, Top & Bottom , Box 0.6 Think. Drawer Tray & Front- 0.8 Mm. Crca As Per Is-513 , Drawer Slides Used Must Be Of Heavy Duty Telescopic Channels 10 All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd 11 All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. 12 Shoes - These Shall Be Manufactured From Hard Rubber Or Pvc And Shall Be Uniform In Texture And Chemically Inactive To The Action Of Mild Acids. The Nominal Height Of The Shoes, Shall Be 35Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 500 Student Study Table 1 Study Table Of Size 1200 Mm X 600Mm X 750Mm Having Wood Laminate Finish The Table Top / Work Surface: Made From 25Mm Thick Plb With Pvc Lipping. Side Panels: Made From 18Mm Thick Plt With Pvc Lipping. Modesty Panel: Made From 18Mm Thick Plt With Pvc Lipping. Neat Wiring Flow With Cut-Outs On Both Sides, Free Standing Pedestal For Adequate Personal Storage. 2 Material: 3 A.Plb / Plt - Top 25 Mm Thickness. 4 All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. 5 Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) 6 Each Plb / Plt May Contain Following Material Layers: 7 Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. 8 C. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Squre Tube 1.22Mm Thickness. 9 D. Storage: Single Drawer Is Provided For Storage With Right Side With Metal Shall Be Provided. 10 Drawer: • Box-Box-File : 550 X 420 X 390, Construction &Material:Welded Assembled, Crca As Per Is-513.• Back , Sides, Top & Bottom , Box 0.6 Thick. Drawer Tray & Front- 0.8 Mm. Crca As Per Is-513 , Drawer Slides Used Must Be Of Heavy Duty Telescopic Channels 11 All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd 12 All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. 13 Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. 14 Finish As Per General Condition Of Tender With 3 Years Warranty Finish As Per General Condition Of Tender 60 3 Seater Visitor Chair Supply Of Orbit 3 Seater Visitors Chair, *Cushioned Seat And Back *Silver Grey Finish With Arms Model No. Sj-708La Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 200 Almarah Steel Full Size Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding &Ark Welding. Anticorrosion Treated Components. Dimensions Outer: 1980 H X 910 W X 480 D Mm Main Door With Shetters Top, Bottom Lh & Rh Sides, Shelves And Back All Materials Thickness Not Less Than 1 Mm Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside With 5 Compartments. Shelve Size 908 X 420 Mm Crca Steel: Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.0 Mm Range As Per Is-513 1994 ( Reaffirmed In1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. With 3 Years Warranty Finish As Per General Condition Of Tender 200 Open Rack 1 Steel Slotted Angular Racks, Open Type With 6 Shelves Making 5 Compartments Of Size 1800Mm X 900Mm X 450 Mm, Cr Sheet Shelfs 1.2Mm Thickness With An Angle Of 2 Mm Thickness And Size: 40 Mm X 60 Mm, With 8 Corner Brackets Of 2 Mm Thickness. 2 Finish: Sheet Metal Components: All Dents, Burrs And Sharp Edges Shall Be Removed From The Various Components. The Components Shall Be Individually Pickled, Scrubbed And Rinsed To Remove Grease, Rust, Scale Or Any Other Foreign Element. Immediately After Pickling, All The Mild Steel Parts Shall Be Given Phosphate Treatment Conforming To Class C Or Is : 3618-1966. 3 The Process For Application Of Phosphate Coating Shall Be In Accordance With Is: 6005-12970. Two Coats To Enamel Paint ( Colour Grey Is Preferred ) Shall Then Be Applied As Follows: Finish Coat With Enamel Paint Conforming To Is : 151-1950, Is : 2932-1974 Or Is : 2933-1975. In The Case Of Stoving Enamel The Components Shall Thereafter Be Backed At A Specified Temperature In An Over Heated Uniformly. The Finish Shall Be Smooth And Uniform With A Hard And Touch Film Of Enamel, Strongly Adhering To The Surface. The Finish Shall Be Free From All Visible Defects And Shall Not Chip When Tapped Lightly With A Dull Pointed Instrument. Note: Putty Shall Be Applied To All The Surfaces Requiring Filling And Shall Conform To Is: 110-1968. 4 Tests: The Performance Tests Required For The Finished Racks Shall Be Carried Out As Per The Methodology Mentioned In The Is 6189:1985. The Rack Shall Have A Name Plate Or Label Fixed To It Showing The Manufacturer’S Name, Initials Or Recognized Trademark. 5 Hospital Furniture Items Shall Be Subjected To Tests In Accordance With The Requirements Of Relevant Specifications. However, The Painted Furniture Items Shall Also Satisfy The Adhesion Test And In Addition Satisfy The Performance Test Give Below: 6 Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 25 Dining Table With Benches Supply Of Dining Table, Specification: Size 93 L X 30W X 30H With 8 Seater, Top In 18 Gauge Of 304 Grade Stainless Atell , Legs In 1 1 / 2 X 1 1 / 2 Square Tube Stainless Stell In 16 Gauge Of 304 Grade With Foldable Benches As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 25 Library Table Size: 1800 X 900X 750 Mm The Understructure Should Be Available In Cr Square Tube. It Should Be Fixed And Shall Accommodate 6 People The Table Top Should Be 25 Mm Thick Pre Laminated Particle Board With Teak Wood Beading 40 Mm Thickness With Polish Top Frame And Legs Crs Quare Pipe 40X40 Mm, 1.6 Mm Thickness With 6 Legs Two Support Footrust With 35 H X 3Mm Pvc Bush. With 3 Years Warranty Finish As Per General Condition Of Tender 5 Principal Table Supply Of Cabin Table, Main Table Of Size 2400 L X 900 D X 750 Ht, Side Composite Storage Unit Size 1350 L X 450 D X 750 Ht, System - Enrich Series. Specifications: Table Top: 25Mm Thick Pre-Laminated Particle Board With 2Mm Pvc Edge Lipping On All Exposed Edges. Under Structure: Supported On Chrome Plated Enrich Legs Supporting On Ms Powder Coated Cross Beams ( 40X20 ) . Modesty Panel: 18Mm Thick Plt Modesty Panel Of 450Mm Ht. Wire Management: Anodised Finish 350 X 150 Flip Up Box With Soft Closures, Without Sockets And Switches Are Provided, Pvc Cable Dump & Vertical Wire Entry Cover For Wire Uptake From Floor To Cable Tray. Storage Unit Top - 25Mm Thick Pre Laminated Particle Board With 2Mm Pvc Edge Lipping. Body, Shelfs & Shutters – 18Mm Thick Pre Laminate Particle Board With 2Mm Pvc Edge Lipping. Back – 9Mm Thick Pre Laminate Particle Board With 2Mm Pvc Edge Lipping. Lock - Regular Lock. Handle - Finger Grooves Hardware – Door Closing Hinges, Mini-Fix, Levellers & Locks, Etc., Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 5 Executive Chair For Principal Pulse Hb Mb Seat, Adj. Arms Larger Seats Head Rest 1.Seat / Back Assembly: The Seat Is Made Up Of 1.5 ± 0.1Cm Thk. Hot Pressed Plywood Measured. The Back Is Made Up Of Injection Moulded Glass Filled Polypropylene & Upholstered Using Net Fabric With High Tenacity Yarn. *Seat Size ( Larger Seat Depth ) { Pulsal } : 47.0 Cm. ( W ) X 51.5 Cm. ( D ) *Back Size ( Pulsax, Pulsal ) : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) 2.High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density =55+ / -2 Kg / M3 And Hardness 16 ± 2 Kgf As Per Is:7888 For 25% Compression. 3.Armrests ( Adjustable ) { Pulsax, Pulsal } : The Adjustable Armrest Is Designed With The Following Features: •Up-Down Adjustment- 6 Steps ( 7.2 ± 0.5Cm Range ) •Armrest Top Is Mounted On Armrest Structure Made Of Glass Filled Nylon. •Armrest Top Is Pu Moulded Over Glass Filled Nylon Insert. 4.Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pad. Lumbar Pad Has An Adjustment Of 8.0 ± 0.5 Cm In Height. 5.Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features. •360° Revolving Type. •Single Point Control. •Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. •Tilt Tension Adjustment. •4-Position Locking With Anti-Shock Feature. •Seat / Back Tilting Ratio Of 1:2. 7.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3 Cm. 8.Pedestal Assembly: The Pedestal Is Injection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch-Center Dia Is 066.1 ± 0.5 Cm. ( 76.1 ± 1.0 Cm. With Castors ) . 9.Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. Overall Dimensions Of Chair Width ( W ) : 76.1 Cm Depth ( D ) : 76.1 Cm Height ( H ) : 98.0 - 108.0 Cm Seat Height ( Sh ) : 45.8 - 55.8 Cm. Neckrest : The Neckrest Assembly Consist Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric Neckrest Is Fixed To Back Assembly Through Neckrest Connector Neckrest Assembly Has Height Adjustment Of4.2 + 0.5 Cm And Rotation Adjustment Of Overall76”+ 2”. The Complete Neckrest Assembly Is Retro Fit To The Main Chair Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 50 Alamarah With Acrylic ( Glass ) Door 1. Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding & Co2 Welded. Front Side Doors With Acrylic Transparent Sheet All Round Frame 70 Mm Borders Thickness 5.5 Mm Thickness 2. Dimensions Outer: 1980 H X 910 W X 480 D Mm 3. A. Top, Bottom, Lh & Rh Sides And Back Material Thickness- 1 Mm 4. B. Removable Rh & Lh Main Doors With Stiffeners Material Thickness =1.22 Mm 5. Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside Shelve Size Of 908 W X 420 D Of Thickness -1 Mm 6. Cr Steel: 7. Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.2 Mm Range As Per Is-513 1994 ( Reaffirmed In 1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. 8. Finish As Per General Condition Of Tender With 3 Years Warranty Finish As Per General Condition Of Tender 25 Office Table With Draws ( Office Table Small Size ) 1. Dimensions:1200 W X 600 D X 750 H Mm 2. Material: 2.1 A.Plb / Plt - Top 25 Mm Thickness. 3. All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. 4. Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) 5. Each Plb / Plt May Contain Following Material Layers: 6. Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. 7. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Square Tube 1.22Mm Thickness. 8. D. Storage: 3 Draw Is Provided For Storage. With Right Side With Metal Shall Be Provided. 9. Body For Storage Units: Body And Draws For Storage Unit Dimensions 390 W X 430 H X 560 D Mm Shall Be Made From Cr Steel Sheet Not Less Than 0.8 Mm Thick With Heavy Duty Telescopic Channels. This Shall Be Bent To Box Shape From One Piece And Tack Welded At Final Overlapped Comer Or Assembled With A Maximum Of Two Pieces Properly Welded 10. All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd 11. All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. 12. Shoes - These Shall Be Manufactured From Hard Rubber Or Pvc And Shall Be Uniform In Texture And Chemically Inactive To The Action Of Mild Acids. The Nominal Height Of The Shoes, Shall Be 35Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 200 Office Chairs S Type With Armrest ( Nursing Station ) Supply Of Class Room Chair And Hostel Room Study Chair, Cushioned Seat & Plastic Back Without Arms & With Powdercoated Legs With Bushes, Magna Va - Plastic ( Pc ) Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 3 Examination Couch Examination Table On Ratchet With No Storage Overall Dimension Of L 1830Mm X W 600Mm X H 850 Mm. The Backrest Has Ratchet Mechanism For Tilting The Backrest. Leg Frames & Intermediate Frames Is Made Of Erw Tubes Having Section Of 30 X 30 Square Tubes With Thickness Of 1.6Mm. Nylon 6 Leg Shoes Is Given To Avoid Wear & Tear. Ms Sheet Metal Lying Surface Of Thickness 1.2Mm Is Used. Top Sheet Metal Panel Base Frame Of 25 X 25 Erw Square Tubes Of Thickness 1.6Mm Is Used. Ratchet Is Of Ms Strip With Section 40 X 4 To Provision The Backrest Tilt. All Ms Part Are Pre Treated And Powder Coated With Ral White Color & All Plastic Parts In Grey. Safe Working Load Is 135Kg Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 500 Student Chair With Pad Royal Visitor S Type Pad Chair Cushion Seat And Back Cushion Foam And Quality Moulded Ply With Pu Handles With 1 Hr Round Pipe 16 Gauge With Fabric With 18 Mm Pre-Laminated Writing Pad. All Hr Pipes Section Are Shall Be Pre-Treated And Epoxy Powder Coated 50-60 Microns Thickness With 3 Years Warranty Finish As Per General Condition Of Tender
