|
| 1 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as directed. |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each, complete all as directed. |
| 3 | Taking down shutters of any description exc.1.0 sqm and not exc. 2.0 sqm each, complete all as directed. |
| 4 | Material and labour for PCC (1:5:10) type E2 (using 40mm graded broken brick aggregate) as in lean concrete in sunken floor including demolition of concrete (unreinforced) alongwith tiles of any description and in any position not otherwise specifically provided for complete all asspecified and directed. |
| 5 | Material and labour for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as complete all asspecified and directed. |
| 6 | Material and labour for, cutting holes in brick walls in cement mortar not exc.half brick for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 complete all asspecified and directed. |
| 7 | Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc. 10cm but not exc 10cm girth complete all as specified and directed. |
| 8 | Taking down shutters of any description not exc.1.0 sqm and refixing in same opening with existing chowkat frame or with new chowkat or frame after necessary repair work including easing and adjusting, complete all as directed. |
| 9 | Refixing in same opening, shutter of any description obtained from taking down here-in-before exc.1.0 sqm but not exc. 2.0 sqm each with new chowkat frame after necessary repair work including easing and adjusting, complete all as directed. |
| 10 | Resecuring or easing and adjusting without taking down the shutter of size exc. 1.0 sqm and not exc. 2.0 sqm complete all as directed. |
| 11 | Material and labour for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed. |
| 12 | Material and labour for 35mm thick 2nd class hard wood, factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | Supply and fix for, factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 14 | Supply and fix for, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed. |
| 15 | Suply and fix for, 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 16 | Suply and fix for, 100x75mm long PTMT/ PVC butt hinges, medium weight, complete all as specified and directed. |
| 17 | Supply and fix for, 100 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed. |
| 18 | Supply and fix for, 150 mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed. |
| 19 | Supply and fix for 100mm size aluminium handles, cast type, anodised, complete all as specified and directed. |
| 20 | Supply and fix in repairs for 150mm size aluminium handles, cast type, anodised, complete all as specified and directed. |
| 21 | Supply and fix for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 22 | Supply and fix for, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 23 | Supply and fix in repairs for, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 24 | Supply and fix in repairs for, 20mm dia anodised aluminium alloy, tubular curtain rod with and including fixing brackets two Nos per door/ window, stop rollers etc. complete all as specified and directed. |
| 25 | Supply and fix for, factory made pressed steel frames of size 125 mm x 60 mm pressed out of cold rolled mild steel sheets of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed. |
| 26 | Supply and fix for, factory made pressed steel frames of size 105 mm x 60 mm pressed out of cold rolled mild steel sheets of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 27 | Materials and labour for glazed ceramic coloured tiles, 450 X 350 X 7mm thick, conforming toIS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar (1:4), including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed. |
| 28 | Material and labour for non skid ceramic tiles, coloured 7 to 8mm thick (square/ rectangular) area of each tile exc.0.11 Sqm but not exc.0.18 Sqm conforming to IS 15622, economy class, grade B IIa on floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and incuding 20mm thick screed bed in cement mortar (1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 29 | Material and labour for, rendering 10mm thick plastering in CM (1:3) mixed with water proofing treatment as per manufacturer\"s instruction finished even and smooth without using extra cement and curved adequately both on floor and walls of sunken portion and tested complete all as specified and directed. |
| 30 | Material and labour for, plastering in patches not exc.3.0 Sqm in each patch, including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. and rendering 10mm thick plastering in CM (1:4) and applying two coats of oil bound distemper over a coat of primer including preparation of new plastered surfaces, complete all as specified and directed. |
| 31 | Supply only integral water proofing compound conforming to IS 2645-1975, complete all as specified. |
| 32 | Supply and fix for, 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 33 | Supply and fix for, 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 34 | Material and labour for preparation of new untreated wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 35 | Supply and fix in repairs for, 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and making good the disturbed floor/ surfaces, complete all as specified and directed. |
| 36 | Supply and fix in repairs for, 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,PVC connections 15mm size with PTMT nuts of length 450mm, 32mm PVC flush pipe and making good the disturbed floor/ surfaces, complete all as specified and directed. |
| 37 | Supply and fix in repairs for, 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 38 | Materials and labour for galvanized steel tubing, medium grade,15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down existing steel tubing, complete all as specified and directed. |
| 39 | Materials and labour for galvanized steel tubing, medium grade, 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down existing steel tubing, complete all as specified and directed. |
| 40 | Supply and fix in repairs for, plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 41 | Supply and fix in repairs for, vitreous china wash basin, wlite, flat back, size 550 x 450mm including 32mm dia PVC waste pipe 800mm long with CP coupling, CP pillar tap 15mm bore, PVC connection 15mm x 450mm long, brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 42 | Supply and fix in repairs, vitreous china wash down water closet pan (EWC) (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 43 | Supply and fix in repairs for, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with \"P\" trap including provision of PCC or lime concrete bedding and removal of debris complete all as specified and directed. |
| 44 | Supply and fix in repairs for angle stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 45 | Supply and fix in repairs for, PVC connections 15mm size with PTMTnuts of length 450mm complete all as specified and directed. |
| 46 | Supply and fix in repairs for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 47 | Supply and fix in repairs for, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed. |
| 48 | Supply and fix in repairs for pillar taps, cast copper alloy, with capstan heads, fency type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, complete all as specified and directed. |
| 49 | Supply and fix in repairs for, 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 50 | Supply and fix in reapirs for, towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (minimum weight 170gms), complete all as specified and directed. |
| 51 | Supply and fix in repairs for, brass chromium plated shower rose 125mm size with shower arm 225mm long with flange with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 52 | Supply and fix in repairs for, flexible/ collapsible PVC waste pipe 31/32x 800m long for kitchen sink/ wash basin all as per Cat No.3272 of make Prayag or equivalent model of make CERA/ Esssco/ Hindware/ Parryware as approved complete all as specified and directed. |
| 53 | Supply and fix in repairs for, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and PVC wastes pipe 800mm long and CP waste copling ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 54 | Supply and fix in repairs for, 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed. |
| 55 | Supply and fix in repairs, for pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-110gms), complete all as specified and directed. |
| 56 | Supply and fix in reapirs for, 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed(minimum weight 15mm-90gms), complete all as specified and directed. |
| 57 | Supply and fix in repairs for, 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and directed. |
| 58 | Supply and fix for, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old soil pipe with fittings, complete all as specified and directed. |
| 59 | Supply and fix for, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old soil pipe with fittings, complete all as specified and directed. |
| 60 | Supply and fix in repairs for, 75mm dia PVC (SWR) bends any radius with access door, complete all as specified and directed. |
| 61 | Supply and fix in repairs for, 110mm dia PVC (SWR) bends any radius with access door, complete all as specified and directed. |
| 62 | Supply and fix for, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 63 | Supply and fix for, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 64 | Supply and fix for, 75mm bore PVC (SWR) reducers (110x75mm), complete all as specified and directed. |
| 65 | Supply and fix in repairs for, 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 66 | supply and fix in repairs for, grating doom 100mm dia of PTMT with or without waste hole (minimum weight 25gms), complete all as specified and directed. |
| 67 | supply and fix in repairs for, grating doom 125mm dia of PTMT with or without waste hole (minimum weight 40gms), complete all as specified and directed. |
| 68 | Supply and fix in repairs for, stainless steel grating 100mm dia with or without hole all as per Cat No.FT-04 of Prayag or equivalent model of make Hindware/ Parryware as approved, complete all as specified and directed. |
| 69 | Supply and fix in repairs for, stainless steel grating 125mm dia with or without hole all as per Cat No.FT-07 of Prayag or equivalent model of make Hindware/ Parryware as approved, complete all as specified and directed. |
| 70 | Supply and fix in repairs for, rotational moulded polyethylene water storage tank 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, with and including PVC float valve 20mm bore, high pressure with polythene float and flynut, tank nipple complete, screwed for iron pipe or brass ferruleand including dismantling existing water tanks and removing to store, complete all as specified and directed. |
| 71 | Supply and fix in repairs for, rotational moulded polyethylene water storage tank 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, with and including PVC float valve 20mm bore, high pressure with polythene float and flynut, tank nipple complete, screwed for iron pipe or brass ferruleand including dismantling existing water tanks and removing to store, complete all as specified and directed. |
| 72 | Supply and fix in repairs for, 20mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms), complete all as specified and directed. |
| 73 | Supply and fix in repairs for, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 74 | Supply and fix in repairs for, 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 75 | Taking down and refixing vitreous china wash down water closet pan (EWC) (pedestal pattern) after necessary repair work including connection to \"P\" or \"S\" trap, seat cover, flushing cistern, flush pipe etc complete all as directed. |
| 76 | Taking down and refixing vitreous china wash hand basin after necessary repair work including connection to taps waste fittings etc. complete all as directed. |
| 77 | Supply and fix in repairs for, flush pipe of polyethylene of low or high density or PVC 32 mm dia, for IWC/ EWC including necessary connection and white cement work, complete all as specified and directed. |
| 78 | Supply and fix in repairs for, 40mm dia waste coupling, brass, chromium plated for kitchen sinks with long screwed shanks and fly-nuts, complete all as specified and directed. |
| 79 | Supply and fix in repairs for, 65mm size swivel shower of PTMT any colour with shower arm, 195mm long with bend of 45degree with flange of PTMT any colour including fixing to steel pipe or union 15mm pipe. (minimum weight 40gms), complete all as specified and directed. |
| 80 | Supply and fix in repairs for, 600 X 450mm bevelled edge mirror of 5mm thick selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to aluminium \"L\" type channel with two Nos wall hanging brackets for hanging to wall complete all as specified and directed. |
| 81 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) |
