Fixing Of Rate Contract For Repairs / Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Shopian ( District Pulwama And Shopian ) For The Financial Year 2023-24- 1 Mechanical Transportation, Loading, Unloading And Handling Of Various Items Such As Pump Parts, Motors, Starters, Voltage Stabilizers, Coil Assemblies, Welding Tools & Plant, Etc. Using Appropriate Means Of Transport As Under: 2 Private Car, Auto-Rickshaw Or Similar With 1.0 Km Lead 3 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 4 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 5 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 6 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 7 Load Carrier Auto, Mini Van Or Similar With 1.0 Km Lead 8 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 9 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 10 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 11 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 12 Mini Truck Like Tata Mobile, Bolero Camper Or Similar With 1.0 Km Lead 13 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 14 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 15 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 16 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 17 Truck, Tipper Or Similar With 1.0 Km Lead 18 Extra Per Kilometer For Lead >1.0 Kms Upto 5.0 Kms 19 Extra Per Kilometer For Lead >5.0 Kms Upto 10.0 Kms 20 Extra Per Kilometer For Lead >10.0 Kms Upto 20.0 Kms 21 Extra Per Kilometer For Lead >20.0 Kms Upto 30.0 Kms 22 Head Load Carriage Of Machinery / Equipment At Locations Inaccessible By Vehicles On Plain / Rough Terrain 23 Upto 50 Kgs Load 24 Extra For Every Additional 50Kgs Load ( Note: Fraction >=25Kgs Shall Be Taken As Equivalent To Next Load Of 50Kgs ) 25 Extra For Uphill Terrain ( Ground Slope >= 07 Deg ) 26 Pumpscomplete Dismantling Of Vt Pump By Way Of:Disconnecting All Leads From The Motor And Marking The Terminals, Uncoupling Of Motor From The Pump, Dismounting Of Motor With Stool. Disassembling, Dismantling And Segregation Of Various Pump Parts Such As Discharge And Column Pipes, Shafts And Couplings, Bowl, Suction Bell, Impeller, Stuffing Box, Fasteners, Etc. 27 Single Stage Pumps With Single Column Pipe Upto 300Mm Nd 28 Single Stage Pumps With Single Column Pipe > 300Mm Upto 600Mm Nd 29 Single Stage Pumps With Single Column Pipe > 600Mm Nd 30 Extra Per Additional Stage Over Corresponding Column Pipe Size Rates Above 31 Extra Per Additional Column Pipe Over Corresponding Column Pipe Size Rates Above 32 Complete Assembling Of All Vt Pump Parts After Cleaning, Coupling And Alignment With Motor, Connecting Of Motor Leads And Testing On Full Load. 33 Single Stage Pumps With Single Column Pipe Upto 300Mm Nd 34 Single Stage Pumps With Single Column Pipe > 300Mm Upto 600Mm Nd 35 Single Stage Pumps With Single Column Pipe > 600Mm Nd 36 Extra Per Additional Stage Over Corresponding Column Pipe Size Rates Above 37 Extra Per Additional Column Pipe Over Corresponding Column Pipe Size Rates Above 38 Complete Dismantling Of Single Stage Horizontal Pump ( All Types ) By Way Of:Disconnecting All Leads From The Motor And Marking The Terminals, Uncoupling Of Motor From The Pump. Disassembling, Dismantling And Segregation Of Various Pump Parts Such As Shaft And Sleeves, Impeller, Gland, Fasteners, Etc. 39 Suction Size Upto 200Mm 40 Suction Size > 200Mm Upto 400Mm 41 Suction Size >400Mm 42 Extra Per Additional Stage Over Corresponding Suction Sizes Above 43 Complete Assembling Of Single Stage Horizontal Pump ( All Types ) After Cleaning Of All Parts Throughly With Petrol, Coupling And Alignment With Motor, Connecting Of Motor Leads And Testing On Full Load. 44 Suction Size Upto 200Mm 45 Suction Size > 200Mm Upto 400Mm 46 Suction Size >400Mm 47 Extra Per Additional Stage Over Corresponding Suction Sizes Above 48 Partial Dismantling Of Vt Pump By Way Of:Disconnecting All Leads From The Motor And Marking The Terminals, Uncoupling Of Motor From The Pump, Dismounting Of Motor With Stool. Disassembling, Dismantling And Segregation Of Various Pump Parts Including Discharge And Column Pipe, Head And Line Shafts And Couplings But Excluding Bowl Assembly. 49 Pumps With Single Column Pipe Upto 300Mm Nd 50 Pumps With Single Column Pipe > 300Mm Upto 600Mm Nd 51 Pumps With Single Column Pipe > 600Mm Nd 52 Extra Per Additional Column Pipe Over Corresponding Column Pipe Size Rates Above 53 Assembling Of Dismantled Vt Pump Parts ( Excluding Bowl Assembly ) After Cleaning, Coupling And Alignment With Motor, Connecting Of Motor Leads And Testing On Full Load. 54 Pumps With Single Column Pipe Upto 300Mm Nd 55 Pumps With Single Column Pipe > 300Mm Upto 600Mm Nd 56 Pumps With Single Column Pipe > 600Mm Nd 57 Extra Per Additional Column Pipe Over Corresponding Column Pipe Size Rates Above 58 Removal Of Only Stuffing Box From The Pump. 59 Fitting Of Only Stuffing Box To The Pump. 60 Replacement Of Driving End ( De ) Bearing Of Horizontal / Vertical Pump By Way Of:Uncoupling Of Motor From The Pump, Isolating Of De Bearing. Carefully Extracting The Old Damaged Bearing From The Housing With The Help Of Bearing Puller, Etc And Fitting Of New Bearing In Its Place. Refitting Back Of Pump Parts, Coupling And Alignment With The Pump. The Job Includes Load Testing Of Pump. 61 Suction Size Upto 200Mm 62 Suction Size > 200Mm Upto 400Mm 63 Suction Size >400Mm 64 Replacement Of Non-Driving End ( Nde ) Bearing Of Horizontal Pump By Way Of:Opening The End Cover Of Nde Bearing Housing. Carefully Extracting The Old Damaged Bearing From The Housing With The Help Of Bearing Puller, Etc And Fitting Of New Bearing In Its Place. Refitting Back Of Pump Parts, Coupling And Alignment With The Pump. The Job Includes Load Testing Of Pump. 65 Suction Size Upto 200Mm 66 Suction Size > 200Mm Upto 400Mm 67 Suction Size >400Mm 68 Extraction Of Submersible Pump / Motor Set Along With Column Pipes From The Well By Hoisting With Tripod And Chain Pulley Block And By Using Tools And Tackles Required For Extraction Of Pump Set And Uncoupling The Pump And Motor 69 Column Pipes Upto 100Mm Nb And 50Mtr Depth 70 For Depths Exceeding 50M 71 Extra Over Corresponding Depth Level For Pipes >100Mm Nb 72 Assembling Of Submersible Pump / Motor Set And Lowering Along With Column Pipes In The Well By Chain Pulley Block, Tripod, Tools And Tackles And Testing On Full Load At Site. 73 Column Pipes Upto 100Mm Nb And 50Mtr Depth 74 For Depths Exceeding 50M 75 Extra Over Corresponding Depth Level For Pipes >100Mm Nd 76 Valvesremoval From Piping System And Complete Dismantling Of Various Type Of Valves Such As Foot Valves / Butterfly Valves / Nrvs / Check Valves / Sluice Valves ( Without Spur Gear Mechanism ) By Way Of Disassembling Of Parts, Etc. 77 < 100Mm Nominal Size 78 >=100Mm Upto 200Mm Nominal Size 79 > 200Mm Upto 350Mm Nominal Size 80 >350Mm Upto 600Mm Nominal Size 81 > 600Mm Nominal Size 82 Assembling Of All Parts Of Dismantled Valve, Fitting In The Piping System And Testing. 83 < 100Mm Nominal Size 84 >=100Mm Upto 200Mm Nominal Size 85 > 200Mm Upto 350Mm Nominal Size 86 >350Mm Upto 600Mm Nominal Size 87 > 600Mm Nominal Size 88 Disassembling Of Operating Mechanism Of Large Sized Valves To Isolate The Thrust Bearing And Removing It, Cleaning Of Housing, Fitting Of Bearing, Reassembling Of All Parts And Testing. The Job Is Inclusive Of Hoisting Arrangements Required For Execution Of Work. 89 Partial Dismantling Of Various Types Of Valves Such As Nrvs, Sluice Valves, Butterfly Valves, Flap Valves, Etc. For Repairs Or Replacement Of Parts Such As Hinge Pin / Seat Ring / Disc Face / Hinge Repairs, Etc. And Reassembling Of All Parts Of Dismantled Valve And Testing. 90 <100Mm Nominal Size 91 >=100Mm Upto 200Mm Nominal Size 92 >200Mm Upto 350Mm Nominal Size 93 >350Mm Upto 600Mm Nominal Size 94 > 600Mm Nominal Size 95 Complete Removal Of Foot Valve ( All Sizes ) From The Pump Suction System And Refitting And Testing After Carrying Out The Requisite Works But Excluding The Cost Of Repairs / Replacements Carried Out On The Foot Valve 96 Polesdismantling Of Pole / Street Light Standard / Strut Embedded In Cement Concrete Foundation Etc. As Required. 97 Erection Of Metallic Pole Of Following Lengths In Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) Standard / Suitable Foundation Including Excavation And Refilling Etc. As Required. 98 Above 4.5 Meter And Upto 6.5 Meter 99 Above 6.5 Meter And Upto 8.0 Meter 100 Above 8.0 Meter And Upto 10.0 Meter 101 Above 10.00 Meter And Upto 12.00 Meter 102 Pump Partsfabrication, Providing And Fitting Of Gm Bush To Bell Mouth / Bowl Unit / Stuffing Box / Sleeve, Or Similar As Per Sample Having Finished Weight As Under: 103 Upto 1.0 Kg 104 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 105 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 106 Extra Per Kg > 5.0 Kgs 107 Fabrication, Providing And Fitting Of Gm Bush With Rubber Insert ( Cutlass Bearing ) To Bowl Housing / Bearing Retainer, Etc As Per Sample Having Finished Weight As Under: 108 Upto 1.0 Kg 109 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 110 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 111 Extra Per Kg > 5.0 Kgs 112 Fabrication, Providing And Fitting Of Gm Lantern ( Cooling ) Ring For Stuffing Box As Per Sample Having Finished Weight As Under: 113 Upto 1.0 Kg 114 Extra Per Kg >1.0Kgs Upto 2.0 Kgs 115 Extra Per Kg > 2.0 Kgs 116 Providing And Fitting Of Gm Split Gland As Per Sample Having Finished Weight As Under: 117 Upto 1.0 Kg 118 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 119 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 120 Extra Per Kg > 4.0 Kgs 121 Fabrication, Turning And Finishing ( On Inside And Outside ) Of Stainless Steel ( Aisi-410 Or Is 1030 ) Muff Coupling, Etc. As Per Old Sample Having Finished Weight As Under: 122 Fabrication, Turning And Finishing Of Specified Stainless Steel ( Aisi-410 Or Is 1570 ) Shaft Of Specified Dimensions With End Preparation ( Threaded, Etc. ) , Keyway As Per Old Sample Having Finished Weight As Under: 123 Upto 20.0 Kg 124 Extra Per Kg >20.0 Kg Upto 40 Kgs 125 Extra Per Kg >40Kgs Upto 60 Kgs 126 Extra Per Kg > 60 Kgs 127 Fabrication, Turning And Finishing ( On Inside And Outside ) Of Stainless Steel ( Is 1030 ) Shaft Coupling, Etc. As Per Old Sample Having Finished Weight As Under: 128 Fabrication, Turning, Finishing And Fitting Of Stainless Steel ( Aisi-410 Or Is 1570 ) Shaft Sleeve As Per Old Sample, Etc. Having Finished Weight As Under: 129 Manufacturing, Finishing, Providing Of Ss ( Aisi 410 Or Is 1570 ) Key / Impeller Lock Collet As Per Available Sample And Slot Size. 130 Fabrication, Turning And Threading Of Stainless Steel Shaft Stud As Per Old Sample Etc. 131 Manufacturing, Providing And Fitting Of Ss ( Is 1030 ) Check Nut / Impeller Adjusting Nut With Proper Locking Arrangement As Per Sample Available. 132 Providing And Fitting Of Cast Iron Split Gland As Per Sample: 133 Upto 1.0 Kg 134 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 135 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 136 Extra Per Kg > 5.0 Kgs 137 Fabrication, Providing And Fitting Of Gm / Bronze Impeller Wear Ring / Seal Ring / Sand Collar 138 Upto 1.0 Kg 139 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 140 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 141 Extra Per Kg > 5.0 Kgs 142 Fabrication, Providing And Fitting Of Ci Casing Ring 143 Upto 1.0 Kg 144 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 145 Extra Per Kg >2.5Kgs Upto 5.0 Kgs 146 Extra Per Kg > 5.0 Kgs 147 Fabrication, Providing And Fitting Of Ms Strainer For Suction Bell, Etc. The Strainer Shall Be Applied With One Coat Of Approved Metal Primer And Two Coats Of Anticorrosive Bituminous Paint To Give An Even Shade. 148 Rethreading Of Bolt Hole Using Appropriate Tap Drill 149 Upto M12 Size Hole / Bore 150 > M12 Size Hole / Bore 151 Repairs To Damaged Ss Shaft By Way Of Rebuilding Of Shaft Using High Quality Ss Electrodes ( Ador / Advani / Esab Makes ) And Then Turning The Shaft On Lathe Machine To Remove The Excess Material Deposited And Restore The Original Dimensions And Profile Of The Shaft. 152 Shaft Upto 50Mm Diameter At One Damaged Spot On Shaft Length 153 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Upto 50Mm 154 Shaft Of More Than 50Mm Diameter At One Damaged Spot On Shaft Length 155 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Above 50Mm 156 Repairs To The Existing Damaged Ss Shaft End By Way Of Rebuilding Using High Quality Ss Electrodes ( Ador / Advani / Esab Makes ) And Then Turning The Shaft On Lathe Machine To Remove The Excess Material Deposited. The Job Includes Threading Or Collar Rebuilding And Facing, Etc. As Per Requirement And Restore The Original Dimensions And Profile Of The Shaft. 157 Shaft Upto 50Mm Diameter At One Damaged Spot On Shaft End 158 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Upto 50Mm 159 Shaft Of More Than 50Mm Diameter At One Damaged Spot On Shaft End 160 Extra For Each Subsequent Damaged Spot Over The Corresponding Diameter Above 50Mm 161 Couplingsproviding And Fitting Bush Type Flexible Coupling With Finished Bore And Keyway Of Following Designations ( Preferred Make: Fenner / Lovejoy / Or Equivalent Makes And Designations ) 162 Fbc-1 ( Max. Bore Upto 28Mm ) 163 Fbc-2 ( Max. Bore Upto 30Mm ) 164 Fbc-2A ( Max. Bore Upto 42Mm ) 165 Fbc-3 ( Max. Bore Upto 48Mm ) 166 Fbc-4 ( Max. Bore Upto 65Mm ) 167 Fbc-4A ( Max. Bore Upto 65Mm ) 168 Fbc-5 ( Max. Bore Upto 75Mm ) 169 Fbc-6 ( Max. Bore Upto 95Mm ) 170 Fbc-6A ( Max. Bore Upto 95Mm ) 171 Fbc-6B ( Max. Bore Upto 95Mm ) 172 Fbc-7 ( Max. Bore Upto 15Mm ) 173 Fbc-7A ( Max. Bore Upto 120Mm ) 174 Fbc-8 ( Max. Bore Upto 130Mm ) 175 Fbc-8A ( Max. Bore Upto 135Mm ) 176 Fbc-8B ( Max. Bore Upto 140Mm ) 177 Fbc-9 ( Max. Bore Upto 150Mm ) 178 Fbc-9A ( Max. Bore Upto 160Mm ) 179 Fbc-10 ( Max. Bore Upto 170Mm ) 180 Fbc-10A ( Max. Bore Upto 180Mm ) 181 Fbc-11 ( Max. Bore Upto 190Mm ) 182 Providing And Fitting Of Rubber Bush For Bush Type Flexible Couplings As Under: 183 Fbc-1 Upto Fbc-2A 184 Fbc-3 Upto Fbc-8A 185 Fbc-8B Upto Fbc-11 186 Providing And Fitting Of Pin For Bush Type Flexible Couplings As Under: 187 Fbc-1 Upto Fbc-2A 188 Fbc-3 Upto Fbc-7 189 Fbc-7A Upto Fbc-8A 190 Fbc-8B Upto Fbc-10 191 Fbc-10A Upto Fbc-11 192 Providing And Fitting Flexible Tyre Coupling With Finished Bore And Keyway Of Following Designations As Per Is 14285: ( Note: Number In Designation Indicates Dim. A Approx Tyre Outer Dia ) 193 Tc-104 ( Tc-007 ) 194 Tc-133 ( Tc-009 ) 195 Tc 165 ( Tc-0012 ) 196 Tc-197 ( Tc-0013 ) 197 Tc-211 ( Tc-0014 ) 198 Tc-235 ( Tc-0015 ) 199 Tc-254 ( Tc-0016 ) 200 Tc-279 ( Tc-0017 ) 201 Tc-314 ( Tc-0019 ) 202 Tc-359 ( Tc-0020 / 21 ) 203 Tc-402 ( Tc-0022 ) 204 Tc-470 ( Tc-0023 ) 205 Tc-508 ( Tc-0024 ) 206 Tc-562 ( Tc-0025 ) 207 Tc-628 208 Providing And Fitting Spare Tyre For Tyre Coupling Of Following Designations As Per Is 14285: 209 Tc-104 ( Tc-007 ) 210 Tc-133 ( Tc-009 ) 211 Tc 165 ( Tc-0012 ) 212 Tc-197 ( Tc-0013 ) 213 Tc-211 ( Tc-0014 ) 214 Tc-235 ( Tc-0015 ) 215 Tc-254 ( Tc-0016 ) 216 Tc-279 ( Tc-0017 ) 217 Tc-314 ( Tc-0019 ) 218 Tc-359 ( Tc-0020 / 21 ) 219 Tc-402 ( Tc-0022 ) 220 Tc-470 ( Tc-0023 ) 221 Tc-508 ( Tc-0024 ) 222 Tc-562 ( Tc-0025 ) 223 Tc-628 224 Fastenersproviding Of High Tensile Steel Hexagonal Bolts 225 M6 X 50 226 M8 X 80 227 M10 X 80 228 M12 X 80 229 M14 X 90 230 M16 X 100 231 M18 X 50 232 M18 X 125 233 M18 X 150 234 M20 X 100 235 M22 X 90 236 M22 X 125 237 M22 X 150 238 M24 X 90 239 M24 X 100 240 M24 X 150 241 M27 X 120 242 M30 X 110 243 Providing Of Hexagonal Nuts Of Suitable Pitch With Sizes As Under: 244 M6 245 M8 246 M10 247 M12 248 M14 249 M16 250 M18 251 M20 252 M22 253 M24 254 M27 255 M30 256 Providing And Fitting Of Carbon Steel Fasteners Of Assorted Sizes 257 Fabrication, Providing And Fitting Of Ss / Alloy Steel Hinge Pin For All Types Of Valves, Etc. As Per Old Sample But Excluding The Cost Of Extracting The Old Pin And Dismantling / Reassembling The Valve, Etc. 258 Fabrication & Providing Of New Bronze Body Seat Ring / Bronze Wedge Facing Ring / Bronze Stem Nut / Float Guide As Per Sample For Various Valves But Excluding Cost Of Dismantling The Valve Parts 259 Upto 1.0 Kg 260 Extra Per Kg >1.0 Kg Upto 2.5 Kgs 261 Extra Per Kg >2.5Kgs Upto 4.0 Kgs 262 Providing And Fitting Of Rubber Gasket For Various Types Of Valves 263 Providing Of Jute / Hemp Gland Packing 264 Fabrication & Providing Of New Ss Stem Nut / Stem-Spindle / Pinion / Pinion Shaft / Stub Shaft ( Aisi-410 Or Is 6603 ) For Sluice / Butterfly Or Other Type Of Valve As Per Old Sample 265 Upto 20.0 Kg 266 Extra Per Kg >20.0 Kg Upto 40 Kgs 267 Extra Per Kg >40Kgs Upto 60 Kgs 268 Extra Per Kg > 60 Kgs 269 Foot Valvefabrication, Providing And Fitting Of Ci Disc Plate As Per Old Sample 270 Providing Of Leather Disc Face Washer For Foot Valve 271 Labour For Fitting Of Washer To Foot Valve Including Removal Of Foot Valve From Suction Line, Extraction Of Old Damaged Washer, Fitting Of New ( Available ) Washer And Refitting Of Foot Valve To Suction Line. 272 Providing And Fitting Of Screwed Type Gm Foot Valve Conforming To Is-4038 Of Nominal Size: 273 15Mm 274 20Mm 275 25Mm 276 32Mm 277 40Mm 278 Flangesproviding And Welding Of Steel Plate Flanges Of Nominal Pressure Rating 1.0Mpa As Per Is 6392 With Nominal Sizes As Under: 279 32Mm 280 40Mm 281 50Mm 282 65Mm 283 80Mm 284 100Mm 285 125Mm 286 150Mm 287 200Mm 288 250Mm 289 300Mm 290 350Mm 291 Providing And Welding Of Steel Plate Flanges Of Nominal Pressure Rating 1.6Mpa As Per Is 6392 With Nominal Sizes As Under: 292 32Mm 293 40Mm 294 50Mm 295 65Mm 296 80Mm 297 100Mm 298 125Mm 299 150Mm 300 200Mm 301 250Mm 302 300Mm 303 350Mm 304 Providing And Welding Of Steel Plate Blind Flanges As Per Is 6392 Of Nominal Pressure Rating 1.6Mpa With Nominal Sizes As Under: 305 50Mm 306 65Mm 307 80Mm 308 100Mm 309 125Mm 310 150Mm 311 200Mm 312 250Mm 313 300Mm 314 350Mm 315 Gasketproviding Of Natural Rubber Gasket For Flanged Joints With Nominal Sizes As Under: 316 32Mm 317 40Mm 318 50Mm 319 65Mm 320 80Mm 321 100Mm 322 125Mm 323 150Mm 324 200Mm 325 250Mm 326 300Mm 327 350Mm 328 400Mm 329 Providing And Fiiting Of C Classonforming To Is: 1239 Of Length 10 Rft Into The 200 / 250 / 300 Mm Casing Dia. Production Well 330 Dn 50C ( Heavy ) Pipe 331 Dn65c ( Heavy ) Pipe 332 Dn80c ( Heavy ) Pipe 333 Providing / Supplying And Fitting Of G.I Flanged Rising Main As Per Requirment 334 Dn 50C ( Heavy ) Pipe 335 Dn65c ( Heavy ) Pipe 336 Dn80c ( Heavy ) Pipe 337 Dn100c ( Heavy ) Pipe 338 Dn125c ( Heavy ) Pipe 339 Dn150c ( Heavy ) Pipe 340 Dn 200C ( Heavy ) Pipe, 6Mm Thick 341 Dn 50B ( Medium ) Pipe 342 Dn65b ( Medium ) Pipe 343 Dn80b ( Medium ) Pipe 344 Dn100b ( Medium ) Pipe 345 Dn125b ( Medium ) Pipe 346 Dn150b ( Medium ) Pipe 347 Providing / Fitting Of New Bearing As Under: ( Make: Skf Imported / Equivalent Imported ) 348 No. 3210 A / C3 349 No. 3212 A / C3 350 No. 3213 A / C3 351 No. 3309 A / C3 352 No. 3313 A / C3 353 No. 51310 354 No. 51312 355 No. 51314 356 No. 51320 357 No. 6014 358 No. 6220 359 No. 6314 360 No. 6315 361 No. 6320 362 No. 6324 363 No. 6406 364 No. 6408 365 No. 6410 366 No. 6411 367 No. 6412 368 No. 6415 369 No. 6418 370 No. Nu322 Ecj 371 No. Nu324 Ecj 372 No. 29322 E 373 No. 29324 E 374 No. 29328 E 375 No. 29330 E 376 No. 29424 E 377 No. 29426 E 378 Providing / Fitting Of New Bearing As Under: ( Make: Schaeffler ( Fag ) Imported / Equivalent Imported ) 379 No. 6220 380 No. 6317 381 No. 6318 382 No. 6319 383 No. 6320 384 No. 29322-E1-Xl 385 29324-E1-Xl 386 No. 29326-E1-Xl 387 No. 29328-E1-Xl 388 No. 29330-E1-Xl 389 No. 29424-E1-Xl 390 No. 29426-E1-Xl 391 Providing / Fitting Of New Bearing As Under: ( Nbc / Arb / Zkl / Equivalent Domestic ) 392 No. 3210 393 No. 3212 394 No. 3213 395 No. 3306 396 No. 3307 397 No. 3309 398 No. 3310 399 No. 3311 400 No. 3312 401 No. 3313 402 No. 51310 403 No. 51312 404 No. 51314 405 No. 51320 406 No. 51322 407 No. 6014 408 No. 6028 409 No. 6217 410 No. 6220 411 No. 6305 412 No. 6306 413 No. 6307 414 No. 6308 415 No. 6309 416 No. 6310 417 No. 6311 418 No. 6312 419 No. 6313 420 No. 6314 421 No. 6315 422 No. 6320 423 No. 6322 424 No. 6406 425 No. 6408 426 No. 6410 427 No. 6411 428 No. 6412 429 No. 6415 430 No. 7312 431 Providing And Fitting Of New Plummer Block / Bearing Housing With Designation As Under: ( Prefered Makes: Masta / Sibco ) 432 S 507 433 S 508 434 S 509 435 S 510 436 S 511 437 S 512 438 S 513 439 S 515 440 S 516 441 S 517 442 S 518 443 S 519 444 S 520 445 S 522 446 S 524 447 Hiring Of Portable Diesel Engine Operated Pumpset For Dewatering Around Workspace Of Pipes, Etc. Excluding Fuel Charges 448 Structural Steel Work In Single Section Fixed Without Connecting Plate Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 449 Structural Steel Work Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 450 Cutting Charges Of Mild Steel Pipes / Plates Including Cost Of Consumables, Etc.But Excluding The Cost Of Transportation Charges Of Equipment To Site 451 Using Grinder 452 By Gas Cutting 453 Welding Charges Of Prepared Mild Steel Sections, Etc Including Cost Of Consumables, Etc. But Excluding Carriage Of Equipment To Site, Etc. 454 By Electric Welding 455 By Gas Welding 456 Hiring Of Mobile Crane Upto 5 Ton Capacity 457 Hiring Of Excavator For Earthwork Excavation. 458 Wtpproviding And Fitting Of 5Kg / Cm2, 12Mm Connection Pp / Pe Filter Nozzle On Bed Of Pressure Filter Vessel 459 Providing And Laying Of Filter Media ( Filter Gravel And Course Sand ) Of Specific Size And Grade In 5000 / 6000 Gph Pressure Vessel, Duly Washed And Free From Dust, Dirt, Loom And Any Other Material Or Suspension. The Job Includes Carriage Of Filter Media Including All Loads And Lifts. The Media Shall Be Laid In Different Layers Of Specific Size And Grade From Bottom To Top Over The Filter Bed Plate. The Bottom Layer Is To Be Laid Without Tilting Or Damaging The Pressure Nozzles. 460 Providing Of Grease ( Industrial Type ) Conforming To Is 7623 ( Preferred Makes: Hpcl Lithon-3 / Indian Oil Servogem-3 / Or Equivalents Of Bpcl; Castrol; Caltex ) 461 Providing Of Ap3 Grease ( All Purpose Type ) ( Preferred Makes: Hpcl / Indian Oil / Bpcl / Castrol / Caltex ) 462 Providing Of Mineral Oil For Bearing Lubrication ( Preferred Make: Indian Oil Servo / Hpcl / Bpcl Mak / Shell Mobil ) 463 Providing Of Graphited Natural Fibre Packing For Pumps, Etc. ( Preferred Make: Champion Style-3116 Or Equivalent ) 464 Excavating Trenches Of Required Width For Pipes, Cables, Etc In All Kinds Of Soil Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M 465 Pipes, Cables Etc, Not Exceeding 80 Mm Dia. 466 Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia 467 Pipes, Cables Etc. Exceeding 300 Mm Dia But Not Exceeding 600 Mm Dia 468 Pipes, Cables Etc. Exceeding 600 Mm Dia But Not Exceeding 1200 Mm Dia 469 Extra For Excavating Trenches For Pipes, Cables Etc. In All Kinds Of Soil For Depth Exceeding 1.5 M, But Not Exceeding 3M. ( Rate Is Over Corresponding Basic Item For Depth Upto 1.5 Metre ) . 470 Extra For Excavating Trenches For Pipes, Cables, Etc, In All Kinds Of Soil For Depth Exceeding 3 M In Depth, But Not Exceeding 4.5 M. ( Rate Is Over Corresponding Basic Item For Depth Upto 1.5 Metre. ) 471 Pumping Out Water Caused By Springs, Tidal Or River Seepage, Broken Water Mains Or Drains And The Like. 472 Gravel Packing In Tube Well In Accordance With Is: 4097, Including Providing Gravel Fine / Medium / Coarse In Required Grading And Sizes As Per Actual Requirement All Complete As Per Direction Of Engineer-In-Charge. 473 Painting For Repaired Pumps / Steel Work 474 Removing Of Old Paint, Rust, Foreign Contaminants Etc. From Pump Body ( Internal & External ) , Structural Work ( Gratings, Any Type Of Frame Work, Etc. ) Motor Body Or Other Equipment By Scrapping, Cleaning, Rubbing, Chipping By Any Means & Preparing The Surface To Receive New Coat Of Paint. The Cost Including Cost Of Materials, Labours, Scaffolding Etc. To Complete The Job At Site As Per Direction Of Engineer In Charge. 475 Providing & Application Of Primer ( Epilux-610 Grey Or Any Other Approved Brand ) On Cleaned Surface Of Pump Body ( Internal Or External ) / Motor Body / Structral Framework / Gratings, Etc. Including Thinner ( Epilux - 844 Or Any Other Approved Brand ) Brush & Other Materials As Required, Labours, Scaffolding Etc. To Complete The Work At Site As Per Direction Of Engineer In Charge.For 1St Coat Of Primer ( Manual Painting ) 476 Cost For Supplying & Application Of Coal Tar Epoxy Paint ( Epilux-5 Or Any Other Approved Brand ) On Cleaned Surface Of Pump Body / Motor Body / Any Stuctural Framework, Gratings Including Thinner ( Epilux-844 Or Any Other Approved Brand ) & Other Materials As Required, Labours, Brush, Painting Equipments Etc. To Complete The Work At Site As Per Direction Of Engineer In Charge. 477 For 1St Coat Of Paint ( Manual Painting ) 478 For 2Nd Coat Of Paint ( Manual Painting ) 479 Painting ( Two Or More Coats ) On Pipes And Fittings With Black Anticorrosive Bitumastic Paint Of Approved Brand Over And Including A Priming Coat Of Ready Mixed Zinc Chromate Yellow Primer 480 Painting ( Two Or More Coats ) With Synthetic Enamel Paint Of Approved Brand Over Cleaned / Prepared Surfaces. 481 Hiring Charges Of Electrician ( For Troubleshooting / Revamping Of Existing Electrical Fitting, Etc. Exclusive Of Specified Works ) : 482 Hiring Charges Of Labourer For Support Of Electrician
