|
| 1 | Dismantling of floor, hearth or wall tiling includingcementmortarbedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge |
| 2 | Taking down chowkhatwith shutter (withouttaking off shutterfrom the frame) and area n exc 1.5 sqm each all as specified |
| 3 | Taking down chowkats but with shutters (without taking off shutters from frames) exc 1.5 Sqm but n exc 4 Sqm each all as specified and directed by Engr-in-Charge |
| 4 | Demolition of concrete of any description in any position not otherwise specifically provided for.complete all as specified and directed by Engr-in-Charge |
| 5 | Demolition and breaking up drain pipes 150mm dia (salt glaged stone ware AC or reinforced concrete pipe set in cm)complete all as specified and directed by Engr-in-Charge |
| 6 | M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge |
| 7 | M & L 25mm thick PCC 1:-2:4 type B0 (12.5 mm graded stone aggregate as in subfloors complete all as specified and as directed. |
| 8 | M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etcset and jointed in neat cementslurry and pointed in white or coloured cementto match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floorfinishes in CM(1:6). complete all as specified and directed. |
| 9 | All as Per Item No.8 here-in-above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 all as specified and directed by Engr-in-Charge |
| 10 | M&L for Non Skid Ceramictiles 7 to 8 mm thickarea of eachtile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed. |
| 11 | M&L for Glazed ceramic colour tiles in vertical surface of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement sherry and pointed in white or colour cement to match with the tile colour including Screed bed or bedding layer of morlar 10 nim thick for vertical faces in CM 1:4 specified as directed. |
| 12 | S&F 30 mm thick 2nd class hardwood flush shutter solid core constructionwith block board core and plywood face panels and commercial type of both complete all as specified and directed by Engr-in-Charge |
| 13 | S&F for 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed debated on the solid, rounded or chamfered, put together with glue pinned at ioints all as specified and directed. |
| 14 | S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specified and directed by Engr-in-Charge |
| 15 | S&F 18/19 mm thick PVC boards fixed with screws to timber frame complete all as specified and as directed |
| 16 | S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type)300mm size and fixing clips of sheet, cast or extruded sections and fixingbolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge |
| 17 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm all as specified and directed |
| 18 | S&F aluminium anodised barrel bolts and fixed of 200 mm length all as specified and directed. |
| 19 | S&F Extruded Aluminium, anodised, bow handles of size 150mm all as specified and directed. |
| 20 | S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) all as specified and directed. |
| 21 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed |
| 22 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm all as specified and directed. |
| 23 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 24 | M&L for preparation of new or previously untreated surface ofsteel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 25 | S&F in repair Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover complete all as specified and as directed. |
| 26 | S & F in repairVitreous china squatting pan of pattern \"long pan\" size 580 mm white with \"P\" or \"S\" trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge |
| 27 | S&F in repairPVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge |
| 28 | S&F PVC (SWR) 110mm bore bends any radiusall as specified and directed. |
| 29 | S&F PVC (SWR) 75mm bore bends any radius all as specified and directed. |
| 30 | S&F PVC (SWR) 110mm bore bends any radius with access door all as specified and directed. |
| 31 | S&F PVC (SWR) 75mm bore bends any radius with access door all as specified and directed. |
| 32 | S&F PVC (SWR) 75mm bore vent cowl all as specified and directed. |
| 33 | Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity , completeall as specified and directed. |
| 34 | Supplyand fixingrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valvehigh pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed. |
| 35 | S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing all as specified and directed. |
| 36 | Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification all as specified and directed. |
| 37 | Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. completeall as specified and directed. |
| 38 | S&F in repairPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 39 | S&F in repairPVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. |
| 40 | S&F in repair Concealed stop cock,Chromium plated, 15 mm, complete all as specified and directed. |
| 41 | S&F PVC connections 15 mm size with PTMT nuts of length 450mm all as specified and directed. |
| 42 | S&F in repairBib taps, cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 43 | S&F in repairGrating doom 100 mm dia of PTMT.(Minimum weight 25 gms) all as specified and directed. |
| 44 | M&L for cement concrete 1:3:6 type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement all as specified and directed. |
| 45 | M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed. |
| 46 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends all as specified and directed. |
| 47 | M & L for complete removal of existing treatment of walls including cornices, pilasters etc and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer andcomplete all as specified and directed. |
| 48 | M&L forfor applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface onexternal surfaces including complete removal of existing treatment over wall and preparation of surfaces even and smooth complete all as specified and directed. |
| 49 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girthand treated with one coats of synthetic enamel paintcomplete all as specified and directed. |
| 50 | Taking up or down steel tubing and connections of 15mm/bore complete all as specified and as directed. |
| 51 | - ditto- but 20mm or bore of pipe |
| 52 | S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified |
| 53 | S&F G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified |
| 54 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered). |
| 55 | M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4)finished even and smooth without using extra cement all as specified and directed |
| 56 | M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement all as specified and directed. |
| 57 | M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer andcomplete all as specified and directed. |
| 58 | M&L forfor applying two or more coats(over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed. |
| 59 | Supply only Integralwater proofing compound |
| 60 | M/L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pan all as specified and directed. |
| 61 | Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed. |
| 62 | M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed. |
| 63 | S&F aluminium snap grid frame work for false ceiling incl 6mm dia GIhanger (upto 1200mm length) adjusting level fixed to roof slab/truss/purlins/rafters @ 12.m C/C complete all as specified and as directed |
| 64 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof covering all as specified and directed. |
| 65 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 66 | S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed. |
| 67 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed |
| 68 | S&F 2nd class HW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed. |
| 69 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work). |
| 70 | M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified. |
| 71 | M & L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 72 | Excavation of trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil, all as specified. |
| 73 | M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 74 | M&L RCC1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in fondation, footing, Plinth beam all as specified and directed. |
| 75 | TMT bar 10mm dia and over cut to length ,bent to shaperequired including cranking , bending spirally for hooping column hooking ends and binding withmild steel wire (annealed ) not less than 0.9mm dia all as specified and directed. |
| 76 | Mild steel joist channel or angle or tee section,ms tubeand fixed with ms flat iron cut into shape drilled and fixed with screw conforming Fe 410 all as specified and directed. |
| 77 | M&L preparation of new steel and iron surface exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified |
| 78 | M&L 100mmthick cement concreteusing (40mm graded aggregate) type D-2 (1:4:8)as in sub base all as specified and directed. |
| 79 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 80 | S&F (20mm curtain rail) harrison rails, aluminium anodised alloy, with fixing brackets, stops, rollars etc 20mm dia complete all as specified and as directed |
| 81 | S& F of brackets decorative (Latto)for 20 mm diacurtain rails all as specified and directed. |
| 82 | Demolition of brick work or stone masonary built in cement mortar incl all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast articles all as specified. |
| 83 | M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 84 | M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 85 | M&L walling of random rubble, uncoursed, polygonal rubble walling brought up to course built in cement mortar 1:4 all as specified and directed. |
| 86 | M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed. |
| 87 | Extra over hammer dressing with maximum depression on face from straight edge held against the dressed surface n, exc 20 mm all as specified and directed. |
| 88 | M&L raised pointing to random rubble stone masonary uncoarsed or brought upto course in cement mortar 1:3 all as specified and directed. |
| 89 | M&L for PCC ( 1:2:4) type B-1 using 20mm graded stone aggregate as foundation etc. completeall as specified . |
| 90 | M & L for preparation of new plaster surfaces of walls including cornices, pilasters etc and applying two coats of WHITE WASHING complete all as specified and directed. |
| 91 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm all as specified and directed. |
| 92 | S&F in repair Stainless steel kitchen plate rack of size 31\" X 30\" X 10\" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and as directed. (Make : Blue star, Cat No - BSKPR-314) or equivalent make of Prayag. |
| 93 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 94 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified |
| 95 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer all as specified and directed. |
| 96 | S&F in repair Vitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting incl 32mm diawaste pipe complete all as specified. |
| 97 | S & F in repairBrass CP tubulartowel rail 20 mm dia , 60 cm long including brackets all as specified and directed. |
| 98 | S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. |
| 99 | S&F in repair brass CP 2 in 1 wall mixer for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed. |
| 100 | S&F in repair brass CP sink mixer swinging provn for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. |
| 101 | S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long all as specified and directed. |
| 102 | S&F in repairscorner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag all as specified and directed. |
| 103 | S&F in repair CP brass chromium plated shower rose 125mm size chromium plated shower roses with or without swivel joints any size, incl fixing to steel pipe or union all as specified and directed. |
| 104 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm all as specified and directed. |
| 105 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point all as specified and directed. |
| 106 | M&L for 12 thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c complete all as specified and as directed. |
| 107 | M&L 12 mm thk toughened sheet clear glass incl edges bevelled /rounded incl grinding / cutting complete with all fittings/ washers/handlesandbolts complete all as specified and directed. |
| 108 | M&L for foundations, including raftfs, footings , plinth beams, bases for columns etc type nominal mix (1:1.5:3) (20 mm graded aggrgate) all as specified and directed. |
| 109 | M&L for columns,pillars ,piers postsandtype nominal mix (1:1.5:3) (20 mm graded aggrgate) all as specified and directed. |
| 110 | M&L mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups withand including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 111 | M&L formwork to sides of plinth beams , foundations and other similar works complete all as specified and as directed. |
| 112 | M&L formwork to sides of pillars, posts,struts,pirs , coloumns and like complete all as specified and directed |
| 113 | S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 all as specified and directed. |
| 114 | S&F powder coated(powder coating min 50 micron)anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified |
| 115 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 116 | Prelaminated particle board of 12 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work all as specified and directed. |
| 117 | M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 118 | M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sqmin floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles all as specified and directed. |
| 119 | All as Per Item no here-in-above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:3 all as specified and directed. |
| 120 | M&L for vitrified pavic tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles all as specified and directed. |
| 121 | M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as specified and directed. |
| 122 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide all as specified and directed. |
| 123 | M&L for rendering15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement all as specified and directed. |
| 124 | Supply only Integral waterproofing compound |
| 125 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement all as specified and directed. |
| 126 | M&L for 10 mm thick 3D designer type PVC insulation panels with EPS stuck to 1mm with printed PVC sheet as per specifiecations and drawingall as specified and directed. |
| 127 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame complete all as specified and as directed . |
| 128 | M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty all as specified and directed. |
| 129 | M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat on new surfaces all as specified and directed. |
| 130 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 131 | Material andlabour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly completefor one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and directed. |
| 132 | All as per Item No. 131 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed. |
| 133 | All as per Item No. 131 here-in-before but for one bell point controlled by 1 Bell push , complete all as specified and directed. |
| 134 | All as per Item No. 131 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 135 | Description all as per Srl item No.131 here in before but with 2.5 Sqmm cable for socket outletpoint 5 Amp on Independent board. |
| 136 | Supply and fixing modular switch 1 way 6A module 230/250 volt , AC supply,ISI Marked, with cover plate complete all as specified and directed. |
| 137 | Supply and fixing modular bell push 1 way 6A module 230/250 volt , AC supply,ISI Marked, with cover platecomplete all as specified and directed. |
| 138 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 139 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 140 | Supply and fixing modular switch 16A1 module 230/250 Volts,50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed. |
| 141 | S & F Modular cover plate with frame & flush box of 6 modules, Make- Legrand / Anchoor / vinay |
| 142 | S & F Modular cover plate with frame & flush box of 4 modules, Make- Legrand / Anchoor / vinay |
| 143 | S & F Modular cover plate with frame& flush box of 3 modules, Make- Legrand / Anchoor / vinay |
| 144 | S & F Modular cover plate with frame& flush box of 2 modules, Make- Legrand / Anchoor / vinay |
| 145 | S & F Modular cover plate with frame & flush box of 1 module, Make- Legrand / Anchoor / vinay |
| 146 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make:Cona , Plaza, Anchor . |
| 147 | Supply and fixing in repair call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand. |
| 148 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one all as specified and directed. |
| 149 | S & F Wall bracket decorative LED Spot light Light fitting with lamp10 Watt Aluminium housing complete with necessary connection including taking down old unserviceable one all as specified and directed. |
| 150 | S&F in repair lamp holder, insulated body, with back plate for batten fittingcomplete. Make- Havells/anchor/Legrand. |
| 151 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. Make Phillips/Bajaj |
| 152 | S & F in replacement of LED / Bulk head Light fitting with lamp1 x 9 watt including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire complete with necessary connection including taking down old unserviceable one all as specified and directed. |
| 153 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. |
| 154 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star ratedvertical type includng fixing of bolts , nuts grouted into the wall, and necessary cement work , making good of disturbed surface of wall, giving electric and water connection and testing after installation. |
| 155 | S & F Exhaust fan 230 volts , 250mm,plastic body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell\"s/CG. |
| 156 | S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed Make- Legrand/L&T/ C&S |
| 157 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.. (Note:MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule .Note:Copper thimble shall be used for connection of cable . |
| 158 | Supply and fixin repair MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 159 | Supply and fix MCB TPN, 240 Volts, 40 to 63Amps, 10 kA rupturing capacity415 Voltscomplete all as specified and directed including taking down old one all as specified and directed. |
| 160 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S. |
| 161 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s.Make : Hageras per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195. |
| 162 | Material and labourfor sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, includingtaking down unservicable one.(Note: two run of 4.0 sqmm cable ,one runof earth wire of 4.0 sqmmand one run of PVC casing capping shall be measured as one length) incl taking down old submain wiring .Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga. |
| 163 | Taking down existing energy meter and refixing the same after completion on the original location all work all as directed by Engr-in-Charge |
| 164 | Taking down existingwater heater of any capacity and deposit the same at AGE E/M Store yard complete all as directed by Engr-in-Charge |
| 165 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing incl taking down old unserviceable earthing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 166 | Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground withstranded aluminumconductor35 sqmm 4 Core 1100 Volts gradeincluding laid in trenches,earth work/excavation, sand filling, bricks/ duct passing through pipe / duct or fixed on pole and connecting and testing incl taking down old cable complete all as specified and directed. |
| 167 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceilingand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch. |
| 168 | Description all as per Srl item No1 here in before but for socket outlet point 5 Amp on same board. |
| 169 | Description all as per Srl item No.1here in before but for socket outletpoint 5 Amp on Independent board. |
| 170 | Description all as per serial item No 1 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 171 | Supply and fixing modular switch 1 way 6Awith cover plate and frame 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor, Vinay |
| 172 | Supply and fixing modular switch 1 way 16Awith cover plate and frame230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor . |
| 173 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 174 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.ake:Cona , Plaza, Anchor, Vinay |
| 175 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one . |
| 176 | S & F in replacement of LED recessed mounted with lamp1 x 9 watt including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire complete with necessary connection including taking down old unserviceable one |
| 177 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 178 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make:Cona , Plaza, Anchor . |
| 179 | Supply and fix in repair MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. |
| 180 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed |
| 181 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s.complete all as specified and directed |
| 182 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium gradeISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. (ii)Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
