|
| 1 | S. S. bush for fibrizer bush material SS CR-CF10 as per ASTM A-351/A-351 & drg no. D-MH-7099, bush size- OD-72.5m, ID- 60m, length -48m, |
| 2 | Hydraulic Piston & cylinder for hydraulic grab of 7.5 ton cane unloader |
| 3 | Coupling of hydraulic pump |
| 4 | Air filter for cane unloader SE-720-WB- hydroline |
| 5 | Oil filter for hydraulic grab 92616910C, K23018, FA57-10, without assembly body |
| 6 | Seal kit for hydraulic grab cylinder piston of cane unloader |
| 7 | EN45 spring steel flat for BE, MBC, RBC & MCC- (65 x10)m |
| 8 | EN45 spring steel flat for meveherent knives (50x6)m |
| 9 | HT bolt for chopper leveler- 1¼” x 4”, make- Unbrako |
| 10 | Nylok nut 1¼” |
| 11 | Rubber strip neoprene butyle (5.3 x 9)m |
| 12 | White lead 10 kg bag, Sakura make |
| 13 | Red lead 25 kg bag, Diwaldi make |
| 14 | 3”pitch duplex chain, make- Diamond |
| 15 | 3”pitch duplex chain half link, make- Diamond |
| 16 | 3”pitch duplex chain U- link, make- Diamond |
| 17 | 2”pitch duplex chain, make- Diamond |
| 18 | 2”pitch duplex chain half link, make- Diamond |
| 19 | 2”pitch duplex chain U- link, make- Diamond |
| 20 | Steel wire rope for cane unloader use ¾”, Usha Martin make |
| 21 | M. S. U- clamp ¾”for 19m steel wire rope of hydraulic grab |
| 22 | Bearing plate for bearing housing of mill house roller as per drg- MH-133/16 |
| 23 | Nut for wedge of mill house as per drg. MH-134/16 |
| 24 | Wear plate for headstock of mill house (with screws) as per drg- MH- 137/16 |
| 25 | Pulley for shaft of bag. Blower as per drg. MH-136/16 |
| 26 | Pulley for motor of BE- as per drg- MH-138/16 |
| 27 | Studs for trash beam as per drg. MH- 138/16 |
| 28 | M. S. C -channel for MR & IRC |
| 29 | Teflon runner for MR & IRC |
| 30 | Bridge wheel for cane unloader with L- bracket housing & shaft |
| 31 | Trolley wheel for cane unloader with L-bracket, housing & shaft |
| 32 | Bearing housing for feed roller of mill house, as per drg. |
| 33 | Bearing housing for top roller of mill house, as per drg. |
| 34 | S. S. ring for mill house , as per drg. |
| 35 | S. S. U-clamp for trash beam, as per drg. |
| 36 | Spindle for wedge of feed roller with nut, as per drg. |
| 37 | D- cycle for mill house, as per drg. |
| 38 | Teflon wheel for rotary screen, as per drg. |
| 39 | Crown pin keys of mill house rollers, as per drg. |
| 40 | Coupling pin (small), as per drg. with Teflon bush |
| 41 | Coupling pin (medium), as per drg. with Teflon bush |
| 42 | Coupling pin (large), as per drg. with Teflon bush |
| 43 | C. I block for tightening the MBC, RBC chain with spindle |
| 44 | C. I. block for tightening the MR & IRC chain with spindle |
| 45 | Bearing tightening plate for fibrizer bearing plumber block |
