|
| 1 | Praparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavation earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith head upto 50 metres. |
| 2 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the Maximum dry density (proctor density). |
| 3 | Supplying and stacking at site |
| 4 | Excavation, supplying and filling of local earth (incluing royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete. |
| 5 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of engineer-in-charge.With material conforming to Grade-II(size range 53 mm to .075mm) having CBR Value-25 |
| 6 | Laying old cement concrete interlocking paver blocks of any design / shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of per the direction of Engineerincharge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 7 | Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub-base/ base course on well mechanical paverfinisher in sub-base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-charge. |
| 8 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong, vaibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 9 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 Coarse sand (zone-III) derived from natural source : 6 graded stone agreegate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth ,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by Engineer -incharge2.8.1 All kinds of soil |
| 11 | Dry brick on edge flooring in requried pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar ,including filling joint with jamuna sand, with common burnt clay non modular bricks |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | Brick work with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor Vlevel in all shapes and sizes in:Cement mortar 1:6(1 Cement:6 coarse sand) |
| 14 | Cement Plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick |
| 15 | Cement concrete flooring 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size aggregate |
| 16 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (Zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.50 mm thick |
| 17 | Half brick masnory with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level. Cement mortar 1:4 (1 cement : 4coarse sand) |
| 18 | Applying priming coat :13.50.1 : With ready mixed pink or Grey Primer of approved brand and manufacture on wood work (hard and soft wood) |
| 19 | Finish walls with water proofing cement paint of required shade :13.44.1 New work (Two or more coats applied @ 3.84 kg / 10 sqm) |
| 20 | Providing and laying vitrified tiles in different sizes (thicknes to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), jointingwith grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc. complete. size of Tile 600x 600 mm |
| 21 | Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid, 10 Litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required : WC pan with ISI marked white solid plastic seat and lid |
