(i) Check Nut Hexagonal 25mm Metallic. Qty.---- 420 nos. Make : UNBRAKO / GKW Fitting / LPSBrand (ii) Nipple 2\" Long Rigid Metallic Conduit 25mm Qty.----210 nos. Make : UNBRAKO / GKW Fitting / LPSBrand (iii) Flexible conduit pipe (Metallic) 12.5mm or 1/2\" dia. Qty.----- 112 Mtrs. Make : Plasto / Century /Ambition / Astral / Dolphin or Similar (iv) Plastic Flexible conduit pipe size 20mm dia Qty.----14 Mtrs. Make :Plasto / Century / Ambition / Astral / Dolphin or Similar (1 set consisting of Item SL No. i to iv). [ WarrantyPeriod: 30 Months after the date of delivery ]
3
Two way Pendent type push button assly. with 2 NO. of normally open inching type push button(indicated UP and DOWN button), suitable for 415V (or above), 10 Amp (or above), with cable entry arrangementthrough uPVC Nipple as per SIEMENS model no.-3SB5802-8AC3 or similar. Make- BCH or Jeevan Schineideror SIEMENS or ESSEN & SNT. [ Warranty Period: 30 Months after the date of delivery ]
4
Limit switch Oil tight and dust proof, die cast aluminum housing suitable for 415 Volts (or above),50 Hz, 10Amp (or above). AC supply for quick braking, spring loaded lever with roller 01 NO.+01 NC Auxiliarycontact with normal angular lever as per ESSEN model type LSRS or BCH catalogue Code No.-LLGS. Matspecn. IS-2147 / 1962 (or latest), IES: 60947-5-1,IP-65 or similar. Make- BCH or L&T or Jeevan/Schineider orSIEMENS or ESSEN. [ Warranty Period: 30 Months after the date of delivery ]
5
(Supply)-(i) CPVC Plastic Elbow, Size-3/4\". Make - Florex or Freedom or Shiva, Qty. ---140 nos.(ii) CPVC Plastic Tee, Size-3/4\". Make - Florex or Freedom or Shiva, Qty.--- 140 nos. (iii) CPVC Pipe, Size-3/4\"dia, Wall thickness-2.5 mm Multiple of 3 Miters. Make - Florex or Freedom or Shiva, Qty.--- 210 mtrs. (iv)CPVC Male adopter, Size-3/4\"with check nut. Make - Florex or Freedom or Shiva, Qty.--- 140 nos. and (v)CPVC Plastic Bend, Size-3/4\". Make - Florex or Freedom or Shiva. Qty.--- 140 nos. (1 set consisting of Item SLNo. i to v) [ Warranty Period: 30 Months after the date of delivery ]
6
(A) Direct Online Starter wall mounting type with push button control, suitable for 3 phase 50 HZ.415 V for 30 HP Motor. The contactor coil of the starter must be suitable for 415 V. 50 HZ. AC supply. The startershall be complete with over load and NO Volt. Protection. Material Specification: IS: 8544 (Part-1) IS: 13947- 4 -1. Make: BCH /SIEMENS / Havells / Jeevan / SCHNEIDER / L&T., Qty-1 no. (B) Supply & Fitment of Materialfor 30 HP DOL Starters (Master) in SL. No. (B) of 25T Universal JMP Jack (i) Red phase indicating lamp 415VAC Qty-1 No. (ii) Yellow phase indicating lamp 415 V AC Qty-1 No. (iii) Blue phase indicating lamp 415 V ACQty-1 No. (iv) On indicating lamp 415V AC (Red) Qty-1 No. (v) Off indicating lamp 415V AC (Green) Qty-1 No.(vi) Trip indicating lamp 415V AC (Amber) Qty-1 No. (vii) Emergency push button Qty-1 No. (viii) 0-500V ACanalog voltmeter Qty-1 No. (ix) 3 phase voltmeter selector switch Qty-1 No. (x) Single phasing, phasereversal/phase sequence protection relay Qty-1 No. (xi) Reset button to release overload relay in case of trippingQty-1 No. (xii)TB 30A 6 way Qty-1 No. & (xiii) TB 30A 4 way Qty-1 No. (1 set consisting of Sl No. i to xiii)Make:BCH / SIEMENS / Havells / Jeevan / SCHNEIDER / L&T. (1 set consisting of Sl No. A & B). [ WarrantyPeriod: 30 Months after the date of delivery ]
7
(A) Direct On line Starter with 2 sets of 3 pole / 4 pole contactors (2 sets AC contactor coils, 25AMP each), each set controlled separately by 415V. 50HZ AC Contactor Coils. One set of contactor coil is to becontrolled by the forward direction of rotation through an inching type push button and the other set throughanother inching button to control the reverse direction of 7.5 HP, 3Phase, 50HZ, 415Volts, AC Motor. There mustbe electrical interlocking contact to prevent both set of contactors to close simultaneously. Each of above pushbuttons should have one normally closed auxiliary contact and one stop push buttons are required. The startershall be complete with over load, shall be wired and shall be provided with power plug and socket with lockingarrangement as shown in schematic Drawing No. 1736/23 and 1737/23 Alt.-1. Each starter is to be provided with2 Nos. power plug and sockets and 2 Nos. of control plug and sockets. Maximum Dimension of the startershould not excessed 280mm (B) X 430mm (L) X 175mm (T) irrespective of Dimension. Material Spec.: IS:13947 Pt.-4 Sec.-1, 1993, Make: BCH or SIEMENS or Havells or Jeevan / SCHNEIDER or L&T. Qty. 1 no.(B)Supply & Fitment of Material for 7.5 HP DOL Starters (Individual) in SL No. (A)of 25T Universal JMP Jack SlNo. (i) Up indicating lamp 415V AC (Red) Qty-1 No. (ii) Down indicating lamp 415V AC (Red) Qty-1 No. (iii) Tripindicating lamp 415V AC (Amber) Qty-1 No. (iv) ) 415V AC 2NO+2NC FS-C 45MM Control Relay Qty-1 No. (v)Reset Button to release overload relay in case of tripping Qty-1 No. & (vi) 30A 3 way terminal block Qty-2 Nos.(1 set consisting of Sl No. i to vi) Make :BCH/Siemens/L&T/C&S/Jeevan. (1 set consisting of Sl No. A & B). [Warranty Period: 30 Months after the date of delivery ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
