|
| 1 | PART-I (BUILDING WORKS):Dismantling asbesots cement (corrugated, semi-corrugated etc) sheets in roof coverings Complete all as specified and directed. |
| 2 | Dismantling plain or corrugated steel sheets of any gauge thickness, including nainital or similar pattern roof coverings Complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steelworks of any description Complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work all as directed |
| 5 | Ditto as in item No. 2but as in unframed work |
| 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets. |
| 7 | Demolition of Cement Concrete unreinforced in any description and in any position not otherwise specifically provided complete all as specified and directed |
| 8 | M&L forPCC(1:4:8) type D2 (using 40 mm graded aggregate) as in fdn,filling and mass concrete complete all as specified and directed. |
| 9 | M&L PCC (1:2:4) type B1 using 20 mm graded aggregate for bearing/bed plates,copings,kneelers,apex stones,kerb stones etc incl weathering, slightly rounded or chamfered angles and throatingcomplete all as specified anddirected |
| 10 | S & Frolled mild steel workin tubular trussesincl necessary welding/fabrications completeall as specified and directed |
| 11 | S & Fgusset plates etc incl necessary welding drilling for fixingetc all as specified and directed |
| 12 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or \"J\" /\"L\"hooks all as specified and directed. |
| 13 | - Ditto -as in item No. 10 but plain sheet as in ridges, gutters, facia bd etc |
| 14 | S&F for suspended false ceiling using anodised GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner \"T\" section of size 38 mm x 24 mm x 0.4 mm thickness and wall angle of size 24 mm x 24 mm x 0.3 mm thickness and cross Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mmthickceiling board ) to be placed in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustement clip providing position for light fixtures, air conditioning dufuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structrural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross \"T\" to be inter locked between main runner @ 610 mm C/C so asto form 600 mm x 600 mm grid complete all as directed |
| 15 | Demolition of Cement Concrete unreinforced in ground foor and pavings not exc 15 Cm thick below or above ground level complete all as specified and directed |
| 16 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 17 | Demolition of brick work built in cement mortar complete all as specified and directed |
| 18 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified. |
| 19 | M&L for brickwork with sub-class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM1:4. |
| 20 | Taking down cement plaster on brick or stone walls etc includingracking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed. |
| 21 | M & L for rendering 15 mm thick onBrick wall finished fair & even in CM (1:4) complete all as specified and directed. |
| 22 | M & L for rendering 10 mm thick onBrick wall finished fair & even in CM (1:6) complete all as specified and directed. |
| 23 | Supply only water proofing compound. |
| 24 | M & L forpreparation of newly plastered surfaces of walls and applyingtwo coats ofcement base paint over cement primer complete all as specified and as directed. |
| 25 | M&L for two coats of Oil bound distemperon wall surfaces over a coat of primeron newly plastered surface of wall includingpreparation of surface complete all as specified and directed. |
| 26 | M&L for scrapping down oldwall surfaces and applying twocoats of oil bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 27 | M & L forscrapping down old wall surfaces walls and applyingtwo coatstwo coats ofcement base paint complete all as specified and as directed. |
| 28 | Demolition of renforced cement concreteof any description and in any position no otherwise specifically provided for as in slab supported on walls beams and columns in floors,roof landings balconies, canopies,deck slab and in shelves and the like complete ll specified and as directed |
| 29 | M&L for mild steel (TMT bars) 10mm dia and over, cut to length bent to shape required, including cranking bending and spirally for hooping for columns, hooking ends and binding with mild steel wire annealednot less than 0.9mm dia |
| 30 | M&L for mild steel (TMT bars) 6 to 8 dia cut to length bent to shape required, including cranking bending and spirally for hooping for columns, hooking ends and binding with mild steel wire annealednot less than 0.9mm dia |
| 31 | M&L RCC 1:2:4 type B-1 (using 20mm graded agg) as in slab supported on walls beams and columns in floors, roof landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 32 | Form work to soffits of suspended slabs/shelves etc thickness not exc 200 mm in horizontal or sloping complete all as specified and as directed |
| 33 | Form work to edges of complete flats horizontal or sloping exc 5 cm but not exc 10 cm wide complete all pecified and as directed. |
| 34 | M&L 100mm thick PCC (1:2:4) type B-2, (using 40 mm graded aggregate) as in Sub Floors Complete all as specified and directed. |
| 35 | M&L 50mm thick PCC(1:3:6) type C-2,(using 40 mm graded aggregate) as in plinth protection Complete all as specified and directed. |
| 36 | Forming construction (dummy) joints 65mm x 10mm wide, filled with sealing compound Grade-B. |
| 37 | Taking down chowkat with shutters of any decsription without takingoff shutters from frame area exc 1.50 Sqm but not exc 4.00 sqm |
| 38 | Ditto as in item No.35 but area not exc 1.50 sqm each |
| 39 | S&F 165 X 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and fixed with wdn scantling/supports etc complete all as specified and directed. |
| 40 | M&L forcement concrete(1:2:4) type B-0 (using 12.50 mm graded agg) in door and windows frames any size single or double rebated including arrangement for fixing of hinges and fixtures as reuqired. |
| 41 | S&F 30mm thick Flush shutters, Solid core construction, with block board core and plywood face panels, commercial type on both sides , complete all as specified and as directed. |
| 42 | S&F 35mm thickIInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided in square with plain, chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, complete all as specified in SSR Part I section 8, clause 8.24 (a) fitted to chowkat complete all as specified and directed. |
| 43 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed. |
| 44 | S&F for 200 mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and as directed. |
| 45 | S&F 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. |
| 46 | S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 47 | S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed. |
| 48 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 49 | M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed. |
| 50 | M&Lfor post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per metre incl drilling and plugging holesetc in apron complete all as specified and as directed |
| 51 | M&Lfor post construction Anti termite treatmentof soil under existing floors using emulsion @ one ltr per hole, 300mm apart inluding drilling and plugging 12mm dia holes with cement mortar 1:2 to match the exist.floors complete all as specified and as directed |
| 52 | Dismantlingfloor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 53 | M&Lglazed coloured ceramic tiles of size 450 x 300 x 7 mm thick on vertical surfaces, set and jointed in neat cement slurry and poited with white cement to match the coloured tiles including 10 mm thick rendering in cm1:4 for verticl sub base. |
| 54 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick)square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM (1:6) all as specified and directed |
| 55 | S&F Hat and coat hooks solid aluminium body for 175 mm to 250 mm and fixed to boarding/shelvescomplete all as specified and as directed |
| 56 | S&F Brass 300 mm, ordinary rat tail,pettern springs, including roller and roller plated complete. |
| 57 | Cutting chases pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing not exc 10CM girth in brick wall, complete all as specified and as directed. |
| 58 | S& F in repairs water closet (Squatt Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor. |
| 59 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nosfixing bolts incl PVC seat cover but excludingflushing cistern and flush pipe) complete includingmaking good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 60 | S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings i.e.float valve, syphon, flushpipe,brackets all as specified and directed by Engr-in-Charge. |
| 61 | S & FPVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed by EIC. |
| 62 | S& Fin repairs bib taps CP brass fancy type with crutch or butterfly handle screwed down screwedfor iron pipe for brass ferrule 15 mm dia . |
| 63 | S&F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore. |
| 64 | S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified including taking up or down steel tubing and connectionsincluding cleaning for re-fixing or removal to store. |
| 65 | S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified including taking up or down steel tubing and connectionsincluding cleaning for re-fixing or removal to store. |
| 66 | S&F in repair vitreous china wash hand basin, (white), flat backsize 630 x 450 mm waste coupling fittings andPVC waste pipe with all fittings complete all as specified and as directed. |
| 67 | S& Fin repairs 15 mm size fancy type pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered `Hot or Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 68 | S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. |
| 69 | S & F in repairs 15 mm dia bore Chromium plated shower roses with or without swivel joints, anysize, including fixing to steel pipe or unionand fixed, complete all as specified and as directed. |
| 70 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screwscomplete all as specified and as directed. |
| 71 | S & F in repairs 25mm dia aluminium drapery rod with natural wdn finish and wooden ornamental attachment bracket two Nos at both ends and matching curtains rings min 8 nos in one mtrs, and fixed, complete all as specified and as directed. |
| 72 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement, complete all as specified and as directed. |
| 73 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed. |
| 74 | S&F in repair CP tubular towel rail 20 mm dia, D type 60 cm long complete all as specified and as directed. |
| 75 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 76 | S&F in repairsvitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe). |
| 77 | Demolition of stone slabs laid bedded and pointed in any mortor and tiles of any description or thickness in floors, aprons etc |
| 78 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 79 | S&F in repair 1200 x 600 mm and 5 mm thbevelled edge mirror of selected quality glass mounted on 6 mm thick commercial ply woodand fixed wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 80 | S&F in repair 15mm dia wall mixer with bend (Make : Sona Super (classic) Code No CL -5078) cast copper alloy with capstan heads, chromium plated screwed down high, pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts screwed for iron pipe. |
| 81 | S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - Iincluding dismantling water tanks and removing to store. |
| 82 | S&F in repairs 20 mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. |
| 83 | S&F in repairs 20mm size gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 84 | M&L for applying evenly a coat of blown type bitumen @ 1.50 Kg/Sqm and blinding with clean dry sand @0.05 cum per sqm ofincl cleaning of surfaces, complete all as specified and as directed. |
| 85 | S&F polythene film, black 50 micron laidon a coat of bitumen primer @ 0.30 to 0.50 Kg per Sqm ,Complete all as specified and as directed by Engr-in-Charge. |
| 86 | M&L forcement concrete(1:2:4) type B-0 (using 12.50 mm graded agg); plinth beams; bases for columns, etc.; basement slabs,of 40 mm thick damp proof course including necessary formwork etc complete |
| 87 | S&F colored powder coatedaluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified |
| 88 | S&F colored powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleats for fixing on walls/ floors of any descriptionand in any position complete all a specified and as directed |
| 89 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steelwire stapled in wooden door/windows complete all as specified and as directed |
| 90 | S & F 4mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 91 | S & F 4mm Plain mild steel wire, galvanised class 3,in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) . |
| 92 | S & F stainless steel butt hinges 100mm size medium weight, complete all as specified and as directed. |
| 93 | Cutting holes in brick walls exc. half brick wall and not exc full brick wall in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed. |
| 94 | M&L non skid cermic colouredtiles 8mmthick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, on dado / skirtingetc and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over and including 10mm thick screed bed or bedding layer in CM (1:4) all as specified and directed |
| 95 | S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 96 | S&F in repair\"s 18mm thick celuka PVC ply of grade 1 quality of both sideprelam fixed with screws,solvent cement/adhesive to make cupboard shutter side to and bottom shelves inside the cabinet and shutters or drawers, complete all as specified and as directed. |
| 97 | S&F in repair\"s factory made PVC shelf/Partition of required size consisting of panells of 18mm(+/-0.7) thick Celuka PVC ply and for supporting the hold of shelf/partions and shall provided 3 edges of 18mmx18mm as per required length. The front sideof the edge visible in the front the shelf/partition to be edge liping by 18mm widex1mm thick PVC sheet of density 600Kg/Cbm, or aluminium clits with screw, etc. Manufactured byan ISO-9001-2015 certified company, using solvent cement etc.complete all as specified and as directed by Engineer-in charge. |
| 98 | S&F continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed. |
| 99 | S&F in repairs Hasp and stple for 75mm of aluminium anodised all as specified and as directed |
| 100 | S&F 100 mm brass handles, cast type anodised all as specified and directed |
| 101 | S&F 18 mm thick pre-laminated particle board interior grade prelaminated one side with decrorative choice laminations and other side balancing white laminationas in shelvesincl necessarayfixing arrangements on walls complete all as specified and as directed. |
| 102 | S & F for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 |
| 103 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10cm long and diameter of neck is 5 to 10 mm. |
| 104 | PART-II (ELECTRIFICATION):Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 105 | Taking down copper/aluminium submain wiring complete,removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 106 | M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm three single core drawn through in and including PVC rigid non metalic concealed conduit 19/20mm dia, ISI Marked complete insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. |
| 107 | (a)One light point /Fan/Exhaust Fancontrolled by one Switch. |
| 108 | (b) All as per Sl item No 3 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed. |
| 109 | (c )All as per Sl item No 3 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed. |
| 110 | Supply and fixing socket out letflush type 5 pinsuitablefor 5 Amp 230 V all as specified & directed. |
| 111 | Supply and fixing switch Piano flush type 5 amp single Pole one way 230 V all as specified & directed. |
| 112 | Supply and fixing lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 113 | Supply and fixing LED bulb of capacity 9 W complete all as specified and directed. |
| 114 | Supply and fixing Ceiling rose surface bakelite surface 65 x 50mm, 3 terminals all as specified & directed. |
| 115 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. |
| 116 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative Batten CRCA sheet box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Cate No: Lumline Plus BS18WLED865SPCSS of Make:- Havells or equivalant in CG/ Philips/C&S. |
| 117 | M&L for MCB single pole, \"B\" curve, 10 KA, 6 - 32 amps complete all as specified and directed. |
| 118 | M&L for MCB single pole, \"B\" curve, 10 KA, 40 amps complete all as specified and directed. |
| 119 | M&L for MCB single pole & neutral \"B\" curve, 10 KA, 32 Amps complete all as specified and directed. |
| 120 | S & F sheet metal enclosure MCB DBSPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthingcomplete all as specified and directed. |
| 121 | Supply & FixSP&N DBs, 4 way double door with 200A rated busbar complete all as specified and directed. Make: Havells/Legrend/L&T/SIEMENS |
| 122 | Supply and fiixing sheet steel, Phosphated, Powder coated single door Vertical TPN DB with provision ofMCCB incommer 4 way complete all as specified and directed. Make- L&T/Legrend/Havells/Siemens |
| 123 | Supply and fix of MCCB,3 Pole, 100 Amps , with breaking capacity 16 KA , Thermal magnetic trip Unit,fixedthermal Fixed magnetic (FTFM), Ics=100% Icu,AC 415 volt ,50 HZ complete all as specified and as directed. Make- L&T/Legrend/Havells/Siemens |
| 124 | Supply and draw submain wiring with two single core 10 sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unseathed conductor drawn into FR PVC casing and caping and all necessary fittings including 10 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dollycomplete after taking down the old unserviceable one all as specified and directed. |
| 125 | Supply and draw submain wiring with two single core 6 sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unseathed conductor drawn into FR PVC casing and caping and all necessary fittings including 6 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dollycomplete after taking down the old unserviceable one all as specified and directed. |
| 126 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380 mm sweep with, blades, and frame and louvers complite all as specified and directed. |
| 127 | M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, handle with 16mm dia round bars and 15mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion. Note:- (i)GI earth lead wire upto 7.5m shall be measured and paid under this items. (ii) PCC chamber shall be provided 50cm away from tthe plinth of building. |
| 128 | M & L for taking down u/s ceiling fans 1200/1400mm sweep, strip opening and removal of burnt out winding wire, rewinding the fans with suitable size of copper winding wire, duly providing leathoride sheets, cotton tape, insulation sleeves, varnish and bearing etc, reassembling and refixing at site including testing.complete and all as specified and directed |
| 129 | M&L for Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store andPainting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 130 | Supply and fix ceiling fans, five star Ratig BLDC complete with three blade, down rod, accessories 230V, 1200mm sweep,complete all as specified. Model:- Efficiencia DX BLDC of Make:- Havells or equivalent in CG/Usha/Bajaj. |
| 131 | Material & labour for replacement of 50 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed. |
| 132 | M&L for metal plug and socket with MCB and steel enclosure,including 20 Amp SP MCB complete all as specified. |
| 133 | S & F of electric water heater, storage type steel body with inner tank and heating element upto 2KW capacity 50 Ltr, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece (Hot & Cold) etc complete all as specified and directed. |
| 134 | PART-III (EXTERNAL ELECTRIFICATION):Supply, lay,jointing, commissioning and testing LT Cable XLPE Insulated,armoured electric power cable with aluminium conductor (heavy duty) 1100 volt grade,25 Sqmm 3.5 core,laid in trenches/duct or fixed to wall /passing through pipe with suitable size cable glands,cable lugs, complete all as specified. |
| 135 | Supply ,lay,jointing,commissioning and testing LT Cable XLPE Insulated,armoured electric power cable with aluminium conductor (heavy duty) 1100 volt grade,10 Sqmm 2 core,laid in trenches/duct or fixed to wall /passing through pipe with suitable size cable glands,cable lugs, complete all as specified. |
| 136 | Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out complete all as specified. |
| 137 | Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed. |
| 138 | Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 139 | Material & labourfor Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete |
| 140 | Material & labour for brickscovering to under ground electric cable usingsub class \"B\" bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed. |
| 141 | PART-IV (ROAD/ PATH)Excavating over areas not exceeding 1.50 m deep and getting out in soft / loose soil complete all as specified and directed. |
| 142 | M&L 75mmPCC 1:4:8 type D-2 (using 40 mm stone aggregate ) as in sub base of floors etc,complete allas specified and directed. |
| 143 | M&L for coloured ,glossy finish precast 60mm thick cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement andpigment manufactured by automatic hydraulic compression with high compressive strength ,any size, pattern and shape as approved by GE,laid dry over sand cushion in patteerns with different colour paver block /tiles as in path, complete allas spd anddirected.Note :- Sand will be measured separately. |
| 144 | M & L for sand cusion/ filling under floors or paving including watering and consolidation complete. |
| 145 | LESS SCHEDULE OF CREDIT(NOTE : The bidders are required to quote the same amount as inserted in estimated rate column against the group of credit items. For details refer Schedule of Credit including notes therein of tender documents. |
