|
| 1 | HT Tape |
| 2 | Glass wool sleeves of sizes |
| 3 | Al. brazing Rod (std. length) |
| 4 | Copper brazing rods (standard length) |
| 5 | PVC sheets 1mm.thick |
| 6 | Empire tape 1” |
| 7 | Cotton tape 1” (size) 35m long. |
| 8 | HV Bush clamps(MS) |
| 9 | Al. clamping member (shoes) for HV Bushing |
| 10 | M.S Flat washers |
| 11 | Aluminum Welding flux |
| 12 | Aluminum flat 4/6/8/10.mm thick of required width. |
| 13 | Copper flat 4/6/8/10mm thick of required width. |
| 14 | MS plug & caps ½” ¾” 1” 1.1/4” 1.1/2” |
| 15 | Oil seal rings (O-rings) for LV/HV bush rods 12.mm dia |
| 16 | Oil seal rings(O-rings) for LV/HV bush rods 20mm dia. |
| 17 | Oil seal rings(O-rings)for LV/HV bush rods 25.mm dia |
| 18 | Creep tape 1” |
| 19 | M4 grade CRGO silicon steel core laminations/stampings duly insulation coated, of required size as per sample |
| 20 | Empire sleeves of sizes |
| 21 | Paint thinner |
| 22 | Steel preimer |
| 23 | Welding Rods 3.15mm/4mm |
| 24 | Re-filling of Oxygen gas |
| 25 | Dhoti Cloth/Old Sarries |
| 26 | HT Insulation paper |
| 27 | Hammers (1Kg-1.5Kg-2Kg) |
| 28 | Scissors |
| 29 | Chain PullyBlock (05 Ton Capacity) |
| 30 | Wooden farmas of sizes |
| 31 | LT brass bush rod with double nuts and washers 12 mm |
| 32 | LT brass bush rod with double nuts and washers 16 mm |
| 33 | LT brass bush rod with double nuts and washers 19/20 mm |
| 34 | LT brass bush rod with double nuts and washers 32mmmm |
| 35 | HT brass bush rods 12 mm with double nutts and washers including brass cup and oil seel washer |
| 36 | 11 KV HT bushing for x-mers conforming to IS 2009, 3347 |
| 37 | LTbushing complete with bush cup suitable for:-12 mm bush rod |
| 38 | LTbushing complete with bush cup suitable for:-16 mm bush rod |
| 39 | LTbushing complete with bush cup suitable for:-19/20 mm bush rod |
| 40 | DPC Aluminium Wire of sizes 12-20 SWG (Against Almn. Scrap 1 Kg of Almn. Scrap of every 1 Kg ofAlmn. Wire supplied) |
| 41 | DPC Almn. Wire 12-20 SWG conforming to relevant IS |
| 42 | Super enamelled Almunium Wire of sizes 13,14,16 and 18 SWG (Against Almn. Scrap 1 Kg of Almn. Scrap of every 1 Kg of Almn. Wire supplied) |
| 43 | Super enamelled Almn. Wire 11-20 SWG conforming to relevant IS. |
| 44 | DPC copper wire 18,16,14 SWG conforming to relevant IS (1 Kg of copper scrap of every 1 Kg of copper wire supplied) |
| 45 | DPC copper wire 11-22 SWG conforming to relevant IS. |
| 46 | Cotton nawara tape roll 100 ft long of standard quality. 1\" width |
| 47 | Cotton nawara tape roll 100 ft long of standard quality. 1. ½\" width |
| 48 | Joining sleaves of standard quality 3 mm dia |
| 49 | Joining sleaves of standard quality 5 mm dia |
| 50 | Joining sleaves of standard quality 8 mm dia |
| 51 | Ruberised washers of standard quality suitable for:- 12 mm bush rods |
| 52 | Ruberised washers of standard quality suitable for:- 16 mm bush rods |
| 53 | Ruberised washers of standard quality suitable for:- 19/20 mm bush rods |
| 54 | cork sheets conforming to relevant IS. 2\"x3\"x4 mm thick |
| 55 | cork sheets conforming to relevant IS. 2\"x3\"x6 mm thick |
| 56 | Cork washers (5 mm thick) suitable for 11 KV bushing. |
| 57 | Cork washers (5 mm thick) suitable for 12mm LT bushing |
| 58 | Cork washers (5 mm thick) suitable for 16mm LT bushing |
| 59 | Cork washers (5 mm thick) suitable for 19mm LT bushing |
| 60 | Bakelite tubes of sizes standard quality 1 mtr long. 6 mm Dia |
| 61 | Bakelite tubes of sizes standard quality 1 mtr long. 10 mm Dia |
| 62 | Bakelite tubes of sizes standard quality 1 mtr long.12 mm Dia |
| 63 | HT kraft paper 2/3 mil conforming to relevant IS |
| 64 | Press card board soft calendared-solid 1mm/2mm/3mm (as per sample |
| 65 | Press card board pre-compressed solid 1mm/2mm/3mm |
| 66 | lathoride paper 20mil conforming to relevant IS. |
| 67 | Silica gel breathers suitiable for 63-400 KVA x-mer |
| 68 | Silica gel in sealed containers (packing of 20 Kgs) |
| 69 | Cotton Dhoti cloth. (un-stained) |
| 70 | Galvanised clamps for 11 KV transformer bushes conforming to IS 4257. |
| 71 | LT Almn. Strips of sizes ( Electrolytic grade) |
| 72 | LT Copper strip of sizes (Electrolytic grade) |
| 73 | Fevicol adhesive |
| 74 | Insulating gum. |
| 75 | Enamel paint grey colour (Nerolac, Asian, Berger make) |
| 76 | Bobin sheets standard quality |
| 77 | Varnish standard quality |
| 78 | Transformer oil make true oil/HP/BP/IOC/Power oil |
| 79 | M.Seal of standard quality |
| 80 | Heating Elements (ceramic) 1 KW |
| 81 | Heating Elements (ceramic) 2 KW |
| 82 | Digital Meggar (1 KV) 0 to 200 G-ohm |
| 83 | Clamp on meter (DCM 30 Amp) Motowane |
| 84 | Lamps with Holders (Philps/Surya/Bajaj make) 100 Watt |
| 85 | Lamps with Holders (Philps/Surya/Bajaj make) 200 Watt |
| 86 | Lamps with Holders (Philps/Surya/Bajaj make) 500 Watt |
| 87 | PVC wiremulti stranded (Havells/Polycab/Finolex)make ,10 mm2 |
| 88 | PVC wire mutil stranded (Havells/Polycab/Finolex)make ,1 mm2 |
| 89 | PVC wire multi stranded (Havells/Polycab/Finolex)make ,1.5 mm2 |
| 90 | PVC wire multi stranded (Havells/Polycab/Finolex)make, 2.5 mm2 |
| 91 | PVC wire multi stranded (Havells/Polycab/Finolex)make, 4 mm2 |
| 92 | PVC wire multi stranded (Havells/Polycab/Finolex)make, 6 mm2 |
| 93 | PVC wire multi stranded (Havells/Polycab/Finolex)make ,16 mm2 |
| 94 | Supply ,installlation and testing of 5 ton chain pully block of ISI make, Motorized |
| 95 | Supply ,installlation and testing of 5 ton chain pully block of ISI make, Non-Motorized |
| 96 | Supply ,installlation and testing of 3 ton chain pully block of ISI make, Motorized |
| 97 | Supply ,installlation and testing of 3 ton chain pully block of ISI make, Non-Motorized |
| 98 | Supply ,installlation and testing of Pulling Machine 3 ton |
| 99 | Supply ,installlation and testing of 2 ton chain pully block of ISI make, Motorized |
| 100 | Supply ,installlation and testing of 2 ton chain pully block of ISI make, Non-Motorized |
| 101 | Crimping tool manual with full set dices |
| 102 | C CLAMP |
| 103 | BENCH VICE |
| 104 | PADDLE SHEARING MACHINE/CARD BOARD CUTTER |
| 105 | CONDUTOR PULLING MACHINE |
| 106 | MS plates of thickness, 5 mm |
| 107 | MS plates of thickness, 7 mm |
| 108 | MS Chequre Plates of thickness, 5 mm |
| 109 | MS Chequer Plates of thickness, 6 mm |
| 110 | MS Chequer Plates of thickness, 7 mm |
| 111 | Winding of DPC Aluminium for HT coils of 63/100/250 KVA Transformers (material be supplied by the department) |
| 112 | Re-winding of LT Aluminium coils of 63/100/250 KVA Transformers |
| 113 | Cutter suitable for cutting ACSR Aluminium condcutor upto 0.1 ACSR |
| 114 | 1 HP three phase motor 960 RPM with operational gear suitable for fixing to 5 ton chain pully block |
| 115 | 1 HP single phase motor withwith operational gear suitable for wnding of HT coils. |
| 116 | Spanner ring/flat set of sizes |
| 117 | Screw Driver (Full set) Taparia make |
| 118 | Motorized impact WRENCH with replaceable bit set |
| 119 | Pipe Wrench, 6 Inch |
| 120 | Pipe Wrench, 12 Inch |
| 121 | LED Lights complete with case suitable for outdoor installation (Philps/Syska/Havels make), 100 to 120 Watt |
| 122 | LED Lights complete with case suitable for outdoor installation (Philps/Syska/Havels make), 46 to 60 Watt |
| 123 | LED Lights complete with case suitable for outdoor installation (Philps/Syska/Havels make), 31 to 45 Watt |
| 124 | LED Lamps(Philps/Syska/Havels make), from 21 to 30 Watt |
| 125 | Oil filling pump mannual 1.25 inch dia manual |
| 126 | Single phase 1 HP motor (Havels/Crompton/Usha make) |
| 127 | Supply of switches and 3 pin sockets with Gang boxes complete of standard make (Havells/Anchor) |
| 128 | Supply and testing of Oil testing Machine of stanadard make. |
| 129 | supply and testing of 250 GPH Filtration Machine of standard make. |
| 130 | Supply and Testing HT/LT winding machines of standard make. |
| 131 | Supply and Testing of winding Ratio Tester of standard make. |
| 132 | Supply of Multimeter of standard make. |
| 133 | Rubberized cork sheet 4mm thick 2ftx3ft |
| 134 | Supply of 4ML contactor for heat chamer |
| 135 | Supply of Bobin (Farma) for LT winding purpose for 250 kVA Transformer. |
| 136 | Supply of Bobin (Farma) for LT winding purpose for 100 kVA Transformer. |
| 137 | Supply of Bobin (Farma) for LT winding purpose for 63 kVA Transformer. |
| 138 | supply of PVC solid sheets Heatinsulated 1220mmx2440mm thickness 3mm to 40mm (Polyvinl). |
| 139 | supply of Almunium joint sleeves |
| 140 | supply of Almunium joint breezing point. |
