Bids Are Invited For 1 22155514000 6 Ea Connecting Arm Along With Pin For Grab Unit Of Stacking Crane In Anode Handling System As Per Dwg No. Ahs1/Mech/Spr/A3/10747 Note: The Pin Surface Shall Be Provided With Antirust Coating And Wrapped Properly. , angul-Odisha

Bids Are Invited For 1 22155514000 6 Ea Connecting Arm Along With Pin For Grab Unit Of Stacking Crane In Anode Handling System As Per Dwg No. Ahs1 / Mech / Spr / A3 / 10747 Note: The Pin Surface Shall Be Provided With Antirust Coating And Wrapped Properly. 2 22155712790 6 Ea Guide Roller Assembly For Grab Close / Open Of Stacking Crane In Rodding Shop-I As Per Drawing No. Rs-I / Mech / Spr / A1 / 11035 Note: Bearing Shall Be Provided Of Fag / Skf Make Only 3 22931080100 4 Ea Clamping Table Lever Fulcrum Axle D.90 X L.358 As Per Item No.12 Of Dwg No. Rsi / Mech / Spr / A2 / 11186, Sht.3 / 3, Rev-1 4 22931080120 6 Ea Tilting Cylinder Clevis Pin D.50 X L.146 As Per Item No. 17 Of Dwg No. Rsi / Mech / Spr / A2 / 11186, Sht.3 / 3, Rev-1 5 22932020190 10 Ea Pin Head Dia.100 X 160 Lg For Tilting Frame Of Finishing Machine As Per Item No.9 Of Dwg No.Rs-I / Mech / Spr / A2 / 11115, Sh.2 / 2 6 22950061870 2 Ea Lower Tie Rod As Per Item No.5 Drg.No.Rs / Mech / Trc / A2 / 7622, Rev-1, Sheet No.2 / 2 7 22950062060 2 Ea Front Upper Axle As Per Item No.3 Drg. No:Rs1 / Mech / Trc / A2 / 7622-Rev-1 Sheet No.2 / 2, 8 22950062130 4 Ea Front Lower And Rear Axle Item No.2 As Per Drg. No:Rs1 / Mech / Trc / A2 / 7622-Rev1, Sheet 2 / 2, 9 22950062200 2 Ea Upper Tie Rod As Per Item No:4 Drg. No:Rs1 / Mech / Trc / A2 / 7622-Rev-1, Sheet No:2 / 2 Note: Pr Item Sl No.6 To 9 Has To Be Procured From A Single Party On Overall L1 Basis Because Of The Interlinking Of Matching Part. 10 22970911130 2 Ea Inlet Side Furnace Header Nozzle Assembly As Per Item 1, Drawing No.Rsi / Mech / Spr / A2 / 11367, Moc: Ss304 For All Parts 1A To 1E. 11 22970911140 2 Ea Outlet Side Furnace Header Nozzle Assembly As Per Item 2, Drawing No.Rsi / Mech / Spr / A2 / 11367, Moc: Ss304 For All Parts 2A To 2F. 12 22972070180 5 Ea Cover Tray For Pawl Bar Of Rodding Bench Casting Machine In Rs-1 As Per Drawing No. Rsi / Mech / Spr / A2 / 11065, Rev-1 Item No.1 To 4 13 22972070190 6 Ea Guide Roller Assembly For Pawl Bar Carriage As Per Item No.5 Of Dwg No. Rs-I / Mech / Spr / A2 / 11463, Sh.4 / 4, Rev.0 Note: - Bearings Used Shall Be Of Skf / Fag Make Only. - The Assembly Shall Be Painted With 2 Coats Of Glossy 14 22972070200 6 Ea Pusher Assembly For Pawl Bar Carriage As Per Sub-Assembly.2 Of Dwg No. Rsi / Mech / Spr / A2 / 11463, Sh.3 / 4, Rev. 0 Note: - Bearings Used Shall Be Of Skf / Fag Make Only. - The Assembly Shall Be Painted With 2 Coats Of Glossy 15 23010011340 12 Ea Door Housing And Modified Axle Assembly For H / Uh Machine Of Rodding Shop-2 As Per Drawing No. Rs-Ii / Mech / Spr / A2 / 11095. 16 23012000630 6 Ea Roller Item No.7 As Per Dwg No. Rs-Ii / Mech / Ga / A1 / 10194, Sh-1 / 2 & 2 / 2 17 23012109010 15 Ea Pin Bush Assembly For Tilting Cylinder Of Bath Breaking Machine Of Rodding Shop-2 As Per Drawing No. Rs2 / Mech / Spr / A3 / 15245. 18 23014402810 15 Ea Pin Bush Assembly For Tilting Cylinder Of Bath Finishing Machine-1 ( Old ) Of Rodding Shop-2 As Per Drawing No. Rs2 / Mech / Spr / A3 / 15242. 19 23508151780 100 Ea Roller Group Outboard Assembly For Apron Conveyor In Butt-1 As Per Drg No.Butt / Ga / Mech / A3 / 4236, Sheet 1 And 2, Note: 1 ) Bearing Used In The Rollers Shall Be Of Skf / Fag Make Only.Same Will Be Checked At Site And If Found To Have Used Bearing Of Other Brands, Same Will Not Be Accepted. 2 ) Fasteners Used For The Rollers Shall Be Of Tvs / Gkw / Lps / Dfl / Pfl Make Only And Of Ht Grade. 3 ) After Assembly Of The Rollers, Each Of The Rollers Are To Be Checked For Free Rotation. 20 23042101520 300 Ea Geared Cam For Stem Lock / Unlock Of Bell Grab Trolley In Rs-2 As Per Drawing No.Rs2 / Mech / Spr / A4 / 9541 21 23086011450 3 Ea Punch Head Assembly For Thimble Press Of Rodding Shop-Ii As Per Drawing No: Rod / Sp / Mech / A3 / 7191. Note: 1 ) .The Component Has To Be Made Froged Blank With 100 % Tested By X-Ray / Ultra Sound For Crack And Other Defects. 2 ) .Relevant Govt Approved Test Certificate For The Same Has To Be Produced With Despatch Document. 22 23089044230 15 Ea Pin Bush Assembly For Tilting Cylinder Of Bath Finishing Machine-2 ( New ) Of Rodding Shop-2 As Per Drawing No. Rs2 / Mech / Spr / A3 / 15244, Item No.1 To 4

Refer document

Refer document

Refer document