|
| 1 | Supply of sub. P/Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained shorted Type impeller.The pump will be directly coupled to required wet type Induction Motor of speed 2900rpm suitable for operation on 3 phase 415 volt 50c/s., AC supply. Discharge:-200 LPM, Head: - 90 Mtr., OD:-150 mmModel CT 66 Make:BS / SU /Cromp / Approved make of DJBHSN CODE:- 8413 |
| 2 | Supply of Automatic LT Panel Board suitable for 415 Volts, 3 Phase, 50 HZ, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 mm for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX 1360 mm X300 mm and having (1) 63 amp change over- 1 No (2) 63 A TPN MCCB -1 No (3) Amp meter 0-50 A- 1 No (4) Voltmeter 1 No (5) Amp & volt meter selector switches-1 set (6) Auto-manual + Light + control MCB TP 32 Amp- 1Nos each (7) CT -3Nos (8) Push button + ON/OFF light2 Nos each (9) 5 KVAR Shunt capacitor- 1 No (10) Aluminium Bus bar size 25 mm X 6 mm - 1set (11) 15 HP Star Delta starter (a) 32 Amp Power contactor-3 Nos (b) overload relay 14-23 A -1 No (C) Star delta timer- 1 NO ( d) QT Timer -24 Hours -1 No (e) Motor Protection relay flush mouting with display with thermal O/L , Short circuit, earth fault, Phase loss, unbalance, phase reversal, lockedrotor protection Make:- L&T/Protech-1 No. Make of accessories /components as per DJB approved. |
| 3 | Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 40 mm wide M.S.Plate for holding the Pipe of 50 mm dia. HSN CODE:- 7307 |
| 4 | Supply-Of G.I. Pipe 50mm dia, Medium-class, each of 3±3\"\" Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA.HSN CODE:- 7308 |
| 5 | supply of 4 core solid aluminium conductor PVC electrical cables for working voltage upto and including 1100 volts of 16 Sq mm size in 100 mtr Roll to IS 1554 (Part I0 1988/7708 (Part I) with aluminium armoured conductor ISI Marked Make:- Havells/ Grandley each roll of 100mtr |
| 6 | Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll.Make: Finolex / Havells/CCI HSN CODE:-8544 each roll of 100mtr |
| 7 | Supply-Of G.I. Bend 90o x 50 mm dia, having Flange at both-ends.HSN CODE:- 7307 |
| 8 | Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality.HSN CODE:-7318 |
| 9 | Supply-Of Rubber-packing for 50mm dia Flange. HSN CODE:-4008 |
| 10 | Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 50 mm dia in center with Locking arrangement by Nuts & Bolts. HSN CODE:- 7307 |
| 11 | Supply-Of Orifice-Assembly 50mm dia, 0.6 Meter Long, Double-Flange. HSN CODE:- 7307 |
| 12 | Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia.Make of Pipe:Jindal / TATA.HSN CODE:- 7307 |
| 13 | Installation of pump and motor, Electric Paneland delivery pipe and flange nut bolt washer the job i/c all tools and tackles,Making of foundation for Electric Panel, fitting of electrical panel, motor connection, to & fro, safety equipments and other precautions etc. for each twell. |
