|
| 1 | Supply, Fixing And Assembling Of 35T Jack At Jmp |
| 2 | Supply, fixing and assembling of Gear Box sub assembly comprising of components asper Drg.- SK.No. 35T/JMP/JACK/01/2017, Alt.-2 and Base Plate as per Drg.- SK. No. 35T/JMP/Jack/08/2017, Alt.-2. [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 3 | Supply, fixing and assembling of Screw Spindle sub assembly comprising of components as per SK.No. 35T/JMP /Jack/29/2017, Alt.-2 & Supply, fixing and assembling of subassembly of Worm & Worm Wheel as perDrg.-SK. No. 35T/JMP/Jack/29/2017, Alt.-2. Make for bearings: SKF/FAG/MBE, For Seals: Royal / Alley / Sunny /Supreme. [ Warranty Period: 30 Months after the date of delivery ] |
| 4 | Supply, fixing and assembling of Lifting sub assembly comprising of components as per Drg.-SK. No.35T/JMP /Jack/26/2017, Alt.-2. [ Warranty Period: 30 Months after the date of delivery ]Page 1 of 12 Run Date/Time: 23/03/2023 13:07:01STORES/EASTERN RLYTENDER DOCUMENT |
| 5 | Supply, fixing and assembling of Gear Box & U Beam assembly comprising subcomponents as perDrg.- SK. No. 35T/JMP/JACK/31/2017, Alt.-2. [Supply of all components (Except Gear Box) and fixing andassembling of all components including Gear Box as per complete assembly drawing] U Beam to SK. No.35T/JMP/Jack/02/2017, Alt.-1. [ Warranty Period: 30 Months after the date of delivery ] |
| 6 | Supply, fixing and assembling of sub assembly of comprising of Rear wheel & Handle assemblycomprising of components as per Drg.-SK. No. 35T/JMP/Jack/30/2017, Alt.-2 & Supply, fixing and assembling ofsub assembly of Sprocket and Chain comprising of components as per Drg.-SK. No. 35T/JMP/Jack/28/2017, Alt.2& Supply, fixing and assembling of sub assembly of Side Wheel with Shaft assembly comprising of components asper Drg.-SK. No. 35T/JMP /Jack/30/2017, Alt. 2. Make for Chain : Diamond / Renold / SKF / Rolon. [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 7 | Spares with metallic Kit Box Complete, one set consisting of 14 items as per Annexure attached,Make: MBE / SNT / BCH / DELTA / ROYAL / MESCAB / KDK / DIAMOND. [ Warranty Period: 30 Months after thedate of delivery ] |
| 8 | Supply, fitment, assembling of pendent type push button assembly with 2 nos. of normally openinching type push button suitable for with cable entry arrangement for 35 Ton Jack. (Fibre body). Make: SNT / L&T /Havells / BCH. [ Warranty Period: 30 Months after the date of delivery ] |
| 9 | Supply fitment assembling of heavy duty general purpose limit switch oil tight on line diecast aluminumhousing suitable for 35 Ton Jack supply quick brake spring loaded leverwith roller 01 no. + 01 NC with normalangular roller lever. With quantity: 3. Nos. perJack. Make: SNT / L&T / Havells / BCH. [ Warranty Period: 30Months after the date of delivery ] |
| 10 | Supply, fitment, assembling of 4 core cable 10 sq. mm (80/0.4mm) copper conductorinsulated andheavy duty sheathed flexible core 1100 volt grade conforming to IS-694(PL-1) 1981. qty. 100 Mtrs. Roll per setMake: KDK / MESCAB / SNT / Havells. [ Warranty Period: 30 Months after the date of delivery ] |
| 11 | Supply, fitment, assembling of single core 4 sq.mm (56/0.3 mm) copper conductor insulated andsheathed cable 1100V Grade. Make : SNT / KDK /MESCAB / Havells. [ Warranty Period: 30 Months after the dateof delivery ] |
| 12 | Supply, fitment, assembling of Air brake direct on line starter with 2 sets of 3 pole contactor, each setcontrolled separately by 415V, 50HZ, AC contactor coils. One set of contractor coil is to be controlled by the forwarddirection of rotation through an inching type push button and the other set through another inching button to controlthe reverse direction of 10 HP, 3 phase, 50 HZ 415 volts AC motor. There must be electrical interlocking contact toprevent both set of contactors to close simultaneously. Each of above push buttons should have one normallyclosed auxiliary contact and one stop push button. The starter shall be complete with over load, shall be wired andshall be provided with power plug and socket with locking arrangement as per schematic diagrams mention below:1. Drg. No. 10 HP JACK BOM, 2. Drg. No. 10 HP JACK CKT, 3. Drg. 10 HP JACK GA Each starter to be providedwith 2 nos. power plug and socket and 2 nos. of control plug and socket. Maximum dimension: 280 mm (B) x 360mm (L) x 162 mm (T). As per material specification IS : 13947 Part-4 Sec-1 1993. Make-BCH/SNT/Havelis. [Warranty Period: 30 Months after the date of delivery ] |
| 13 | Supply, fitment, assembling of 10 HP brake Motor with fail safe disc brake assembly. Materialspecification IS - 325/1996 and as per following: - Motor 10 HP squirrel cage totally enclosed fan cooled horizontalfoot mounted with brake attachment complete with fan cover keys, including holding down bolt for brake fail safe discbrake, to be fitted with the motor mentioned above with electromagnetic complete with suitable cover and tool.Complete maintenance / operation manual in duplicate to be provided with motor and brake assembly, Make: Delta /Pethe / ABB / BCH / Crompton. [ Warranty Period: 30 Months after the date of delivery ] |
| 14 | Supply, fitment, assembly of Air brake direct on line starter wall mounting type with pushbutton control,suitable for 3 phase, 50Hz, 415V. 40HP motor. The starter shall be complete with over load and NO volt protection.Citation DOL motor starter in sheet steel enclosure with citation E contactor (with 380-415 V coil), Cat RefNACT2LEEM, over load relay range (37.6 to 60A), 70A contactor, Citation E contactor very rugged and reliablecontactor having mechanical interlocking facility. Make : BCH/L&T/Havells. [ Warranty Period: 30 Months after thedate of delivery ] |
