Wbhf/Dch/955 E-Tender(2Nd Call) For Procurement Of Instruments Through Smis Portal For Non Cat Items , Acrylizer For 16 Flasks Or More Stainless Steel Lined Both Outside & Inside. Temperature Is Controlled By Thermostat From 5°C Above Ambient To 100°C With A Sensitivity Of +-5’C With Timer Can Be Set 1/2 Hour To 2 Hours. Drain Valve Is Provided For Dewaxing. To Work On 220/240 Volts Ac. , Curing Pressure Pot 5 Liter Or More Capacity Pressure Pottemperature Is Preset To Approximately 120°F And And Manually Adjusts To A Maximum 160°F And. Solid Clad Bottom Provides Even Heat Distribution. Includes An Easy-To-Read, Built-In Pressure Gauge And Quick-Release Air Valve.The Pot Has A Safety Device To Prevent Overheating, And A Secure Double-Locking Lid. Easy-To-Clean Stainless Steel Interior. Rubber Feet Keep Pot Firmly In Place. With Lid Gasket , Deflasking Unit Operates On Air Pressure. With Handheld Chisel- Provided With Detachable Tips Provided With Variable Power Control With Air Inlet And Tubing Length Not Less Than 1.5 Meter. Working Pressure 1-6 Bar , Dental Dewaxing Unit- With Digital Control For Water Temperature Regulation. Construction: Stainless Steel Tank Sizes (300 X 200 X 350 Mm) Approximately Water Filling: Manual Heater: 2000 Watts. With Drain Valve , Duplicator A. Programmable Brushless Agitator Motor Temperature Controls For Precision Warmup And Cool Down Phases Optimised Heating Strategy And Provision For Effective Disposal Of Gel And Prevention Of Nozzle Blockage Maintenance Of Consistent Gel Quality Voltage: 200230V, 50/60Hz, B. Pressure Compaction Unit For Duplicating Silicone Materials Automatic Mixing And Metering Unit For Two Component Silicone Material , Flask Press Flask Press With Base And Cross Bar Made With High Strength Steel. The Structural Elements Made With Chromium Plated Steel. Capable Of Pressing Upto 1 To 3 Flasks At A Time. Base Should Have Holes For Attachment To Bench , High Speed Lathe (Rpm>6500) With Suction Unit Electrically Operated Heavy Duty Motor Unit Having Power Not Less Than – 0.5Hp High Speed R.P.M.>6500 Rpm Arrangement To Attach Bur Holding Chuck – Electroplated Spindle On One Side For Polishing Buff Wheel, On The Other Arm Is A Grinding Stone Wheel Of Diameter 2.5 Inch Or More. Provided With Built In High Power Dust Suction Unit For Clean, Unpolluted, Dust Free Work Environment, Attached With Dust Collection Bag – Easily Removable Tray For Debris Collection. Table Mountable Heavy Base Plate For Vibration Free Operation Built – In Lighting For High Visibility , Heavy Duty Lathe With Suction Unit Electrically Operated Heavy Duty Motor Unit Having Power Not Less Than – 0.5Hp High Speed R.P.M.-3000 Rpm Arrangement To Attach Bur Holding Chuck – Electroplated Spindle On One Side For Polishing Buff Wheel, On The Other Arm Is A Grinding Stone Wheel Of Diameter 2.5 Inch Or More. Provided With Built In High Power Dust Suction Unit For Clean, Unpolluted, Dust Free Work Environment, Attached With Dust Collection Bag – Easily Removable Tray For Debris Collection. Table Mountable Heavy Base Plate For Vibration Free Operation Built – In Lighting For High Visibility , Hydraulic Press The Closed Circuit Hydraulic Press Should Work With A Pressure Up To 7000 Kg Of Thrust. It Can Contain Up To Three Flasks At A Time. The Structural Elements In Chromium Plated Steel. Provided With Dial. , Implant Retrieval Kit Implant Retrieval & Removal Kit Must Contain Implant Remover Compatible With All Sizes,Implant Removal Screw With Easy Identification And Placement,Screw Drivers Of Different Sizes And Implant Removal Ratchet Wrench(Indicates Minimum & Maximum Torque)-Kit Must Help In Implant Fixture Fractured Screw Removal, Abutment Cover Screw Remover Surgical Tool. , Mechanical Press This Equipment With Base And Cross Bar Made With High Strength Steel And The Structural Elements In Chromium Plated Steel. Capable Of Pressing Upto 1 To 3 Flasks At A Time. Base Should Have Holes For Attachment To Bench , Micro Surveyor Dental Surveyor Which Is Fully Adjustable, Ball Type Working Base Support 360 Degree Overall Working Interface, Complete Set With Handpiece Holder And Precise Angle. With All Necessary Surveyor Tolls. , Model Trimmer With Carborundum Disc Motor Rpm 2800Heavy Duty , Equipped With 2 Ball Bearing Single Speed Rating Continuous With Buffer And 10 Inch Carborundum Disc With Heavy Base That Can Be Clamped And Installed On Underline Table With Water Inlet And Outflow Water System , Model Trimmer With Diamond Disc ½ Hp, Motor Rpm 2800, Heavy Duty, Equipped With 2 Ball Bearing Single Speed Rating Continuous With Buffer And 10 Inch Diamond Disc Rough, With Heavy Base With Water Inlet And Outflow Water System. , Palatal Trimmer Provided With One Fast Cutting Trimmer, Electrically Operated, Rpm2600 Or More, Body Made With304 Grade Stainless Steel Or Non Rusting Alloy. Dull Finished Works Surface, Dust Collection With Adapter Hose. , • Stereo Microscope Wide Field Eye Pieces-10X/20Mm Can Accept 5X,15X& 20X Eye Pieces,Inter Papillary Distance Adjustable 55-75Mm,Sufficient Working Distance, Field Of View 40Mm At 5X And 20Mm At 20Xminimum 0.5X Objective, Erect Image With Magnification Of 2.5X-100X, Sufficient Light Source –Led Co Axial Reflected/ Top Light 110V,Proper Zoom Adjustment, Dual Power, Optional Auxiliary Lens Attachment, Focus Knob Inclined Lenses(45 Degree). , Spindle Grinder With Vacuum Suction Foot Control And High Intensity Illumination. Safety Glass For Glare Elimination And Visual Protection. Provision For Connection Dust Collector Suction. Operating Voltage 230Vac +/- 10% 50Hz. Motor Rotation At 24000Rpm Or More With Suction Unit & Dust Collector. , • Spot Welder With Soldering Attachment • Electrically Operated • Voltage110 - 240 Volts • Applications / Indication Spot Welding • Power Settings2,000 Amperes • Heat Settings2 • Electrode / Tip Type Hand Electrode • Welding Positions Adjustable • Includede Components Brass Posts Foot Switch Copper Welding Tips 2 Remote Electrode Chords Insulating Material Flux Carbon Points Sample Of Solder Prosthodontic Work , Vacuum Mixing Machine Electrically Operated Motor 150 Watts Or More Compact Automatic Regulation Of The Vacuum The Mixing Motor Remains Clean And Is Easily Serviced Due To A Supporting Filter And A Fine Filter In Conjunction With The Maintenance-Free Vacuum Pumpdirect Connection Between Mixing Bowl And Vacuum Pump – No Disturbing Exterior Hosemechanical Coupling To Lock The Mixing Bowl In Positionprovided With Mixing Bowls (Upto 500 G ) , • Vibrator • Electrically Operated - Size 4.5 X 8 X 6.5 Inches Or More Platform Shape Rectangular, Type Heavy Duty • Construction Enamel Painted Body With Rubber Plate Above Body, Speed: 3-Speed Vibration Controller • Platform Shape Rectangular , • Wall Hanging Micromotor • Dental Hanging Motoruniversal Type, Watt-330-400, Rpm-10000-18000, Rating 60 Min. With Extendable Cord Having All Types Bar Attachment And Foot Control , Knife Sharpener Automatic Knife Sharpener, Equipped With Automatic Timer 0-60 Min. To Adjust Sharpening Time Equipment Should Sharpen All Microtome Knives Upto 140 Mm In Length. Supplied With The Following Accessories In Cabinet, Universal Knife Holder - 1 No.Honing Glass Plate - 2 Nos. Honing Glass Compound - 1Bottleknife Inspection Block - 1 No.Redressing Pad - 1 No. Operating Manual,Micro Abrasives Suspension Ma-2000 Micro Abrasive Suspension For Coarse Honing Of Microtome Knives (2 Bottles Of 200 Ml. Each) Ma-3000 Micro Abrasive Suspension For Fine Honing Of Microtome Knives (2 Bottles Of 200 Ml. Each). , Distilled Water Plant Voltage 220V,Capacity 4-5L,Driven Type-Electric,Semi Automatic,Stainless Steel,Single Phase,Material Grade Ss 304,Type Wall Mounting , Staining Basket(Ss) Slide Staining Assembly Of Stainless Steel With Capacity To Hold 12 Slides , Staining Trough(Ss) Slide Staining Trough Of Stainless Steel With Capacity 25 Slides Having Minimum Dimension Of 440*1100*190Mm. , Staining Trough(Glass) Glass Trough For Staining 5 To 10 Slides Minimum, Should Be Made Of High Grade Soda Glass. Chemically Stable& Reasonably Hard And Extremely Workable. , Microtome(Manual) Dimensions (W X D X H): 438 Mm X 472 Mm X 265 Mm (17.24 X 18.58 X 10.43 In), Section Thickness Setting Range: 0.5 - 60 ?M Total Horizontal Specimen Feed: 25 Mm, Vertical Specimen Stroke59 Mm Specimen Retraction: On/Off Approx. 20 ?M Specimen Orientation: Xy - ±8° Trimming Thickness: 10 ?M, 50 ?M , Semi Automatic Microtome Section Thickness Range From 0.5 To 100,Vertical Specimen Stroke- Vertical 8 Degree,Z 360 Degree,220V,50Hz/110V,60Hz,Object Feed 28Mm,Argonomic Design, Compact Dimension, Vertical Guidance By Zero Backlash Andcross Roller Bearings- Electronic Precision Feed Mechanism With Stepping Motor Technology. , Spencers Knife Alloy Steel,For Use In Laboratory, Tip Shape-Straight,Blade Width /Thickness-1Mm, Head Length-120Mm,Shape-Straight, Handle-Plastic , Pressure Moulding Machine (Dental) Thermally Controlled Heater Reaches Working Temperature In Few Minutes. With Inbuilt Vacuum Unit. Power: 230 V, 850 To1000 W Working Pressure: 0,5 – 6,0 Bar Measurements (W X H X L): 450 X 230 X 260 Mm Iso Or Ce Certified , Automatic Digital Electro Polisher, Auto/Manual Modes, With Timers, Electrolyte Flow Regulation 38 Mm Disc For Psa Paper & Cloths Supply 230 V. Ac Current – 2.5 Amp., Voltage – 80V, Supply – 230 V.A.C.Polishing Probes – Unique Pen Type System With Recirculation Of Electrolyte, Pump 25 Watts Reservoir (0.5 Ltr) , Scanner With Transparency Adapter For Dental Use , Dry Heat Sterilizer Volume 25L, Temp-Rt+10250 Degree Centigrade, Fastheating With Forced Convection, Adopt Two Sets Of Over-Temperature Protection System, Computer Control, Lcd Display , Anatomical Articulator With Face Bow Attached 1. Rust Free Construction. 2. Fixed Condylar Guidance With Spring Mounted Elements That Are Attached To Upper Member3.Incisal Pin 4. Mid Incisal Pin 5. Orientation Rod 6. Incisal Guide Table 7. Face Bow Attached , Tracing Table Portable With Opaque Screen Light Box With Led Electrically Operated With Adjustable Illumination. , Induction Casting Machine With Vacuum Pump Power:Ac220v 50Hz-60Hz 2000Watt Or More Centrifugal Mount:600 R/Min, Melting Type: Induction, Casting Sequence 3-5 Minutes ,Maximum Melting Temperature 1700 °C, Maximum Weight Of Alloy To Be Melted 60Gms, Built In Vacuum Pump With Vacuum Adjustment By Digital Software, Vacuum Level 0.7 Bar Or Lesser, Maximum Pressure 3.5 Bar Attachment For Argon Gas Supply. Casting Ring Dimensions Minimum 50 X 55Mm & Maximum 100 X 70Mm Motor Power:350W Or More , Maximum Temp 1200C Working Temp 1150C With Digital Display Cum Temperature Controller With Safety Alarm Size : 175X175x225mm 4.0K.W Capacity , Programmable Porcelain Furnace With Vacuum Pump Power Connection 50-60Hz 200-240 V 50-60Hz Acceptable Voltage Fluctuations ±10% Max. Power Consumption 8.5 A At 200-240V Data For The Vacuum Pump: Max. Power Consumption: 2.1 A Final Vacuum: < 50 Mbar Use Only Tested Pumps Display Graphic Lcd Display With Background Lighting And Touch Screen Display. Dimensions Of Electrical Fuses 110-120 V: Diameter 6.3 X 32 Mm 200-240 V: Diameter 5 X 20 Mm Dimensions Of The Closed Furnace Depth: 430 Mm Width: 305 Mm/410 Mm (With Cooling Tray) Height: Atleast 560 Mm Usable Size Of The Firing Chamber Diameter: 80 Mm Height: 48 Mm Max. Firing Temperature 1200 °C/2192 °F Weight Furnace Base: 12.0 Kg Furnace Head: 7.0 Kg , Sand Blaster Unit Self Illuminated Chamber. Unit With Ventilation Slits With Rubber Gloves, Pressure Regulator, Air Filter, Provided With Glass Pane. Flow Of Blasting Material From 1 To 6 Bar. With Wear Resistant Nozzle Tip Attached With Wear & Tear Resistant Hoses & Nozzles. With Filter. Micro & Macro Mode. , Ceramic Unit Ceramic Sculpturing & Finishing Kit Comprising Of High Quality Sable Hair/ Synthetic Filament Brush Size One Zero, Two Zero And Four Zero And Other Sizes, Ceramic Curver, Mosquito Forcep,Tweezer, Ceramic Pallete For Mixing Ceramic Powder And Other Associated Carving & Finishing Instruments , Metal Grinder High Power Motor, 1/3 Horse Power With 2850 Rpm, Adjustable Transparent Magnifier Safety Guard, Low Noise Level, Low Power Consumption. Less Weight , Polishing Lathe Hi Power Motor, 1/3 Horse Power With 2850 Rpm,Single Speedwith 3 Chucks(Buffer ,Stone & Bur Chuck),Metal Cable Arm And It’S Attachment. , Oscilating Saw For Dental Use , Autoclavefully Programmable Fully Programmableautoclave With Vacuum & Dry Cycle. Capacity 22-24 Litres Chamber Size And Micro Processor Control,Wrapped/Unwrapped,Porous,Solid Instrument Including Cotton Swabs Can Be Sterilised, Digital Display Of Pressure & Temperature, Silicon Gasket, Prevent Any Leakage Of Air,Diagnostic Automatic Alarm For Any Malfunctioning,Can Be Used At 121 Degree C/134 Degree C During Sterilisation, To Storage Times For Fresh And Used Water,Chamber Size(Inner Space)-190X190x360 Mm Or More With Built In Water Chamber Provided With Safety Lock On Door, Gasket Lined. Provided With 3 Trays. With Digital Display , Trauma Set Including Bone Plating Kit For Dental Use , Implantologykit Comprising Of Surgical Armamentarium Comprises Of: Point Drill, Pilot Surgical Drill, Tap Drill, Drill Extension, Counter Sink, Stopper, Connectors, Parallel Pin, Depth Gauge, Torque Ratchet, Fixture Direction Pin, Fixture Driver, Hex Driver & Other Related Items , Implantologykitwith Implantscomprising Of Surgical Armamentarium Comprises Of: Point Drill, Pilot Surgical Drill, Tap Drill, Drill Extension, Counter Sink, Stopper, Connectors, Parallel Pin, Depth Gauge, Torque Ratchet, Fixture Direction Pin, Fixture Driver, Hex Driver & Other Related Items Dental Implants , Distraction Osteogenesis Kit For Dental Use , Piezo Surgical Kit: Device With Intermittent Operation, 60 Sec On Then 30 Sec Off With Irrigation, & 30 Sec On- 120 Sec Off Without Irrigation, Power Supply 240V,50/60 Hz, Maximum Power Absorbed 120Va. Surgical Tip Capable Of Modulating From 10, 30 & 60 Cycles/S (Hz) To 29Khz. Power Adjustable From 2.8 To 16W. Tip Vibration In Range Of 60-200?M.Motor With Tips & Other Accessories , Ultrasonic Cleaner Minimum Capacity 13 Liters With Mesh Bucket Ultrasonic Cleaner 220V, 100 -200Watt & Above, 13 Liter Capacity, With Stainless Steel Body &Cover. , Minor Oral Surgery Kit For Dental Use , Lab Micromotor With Hand Piece Compact And Portable Size, Continuous Variable Speed Control, R.P.M-1000 -40000, On/Off Foot Switch. One- Touch Change Of The Driving Direction For Efficient Operation With Carbon Brush Motor With Handpiece , High Volume Suction For Dental Use , Automatic Periapical X Ray Developer Processes All Films From 2 X 3 , 3 X 4, 15 X 30 Up To 24 X 30 Cms Dry In 5 Minutes, All Auto Processing Of Developing & Fixing Of X-Ray Films Auto Temperature Control And Auto Film Transport Standard Packaging/Physicalverification Of Sample May Be Made , Radiovisiography& Software With Compatible Desktop A) X Ray Unit: Dc X Ray With Timer & Wall Mounted Scissor Arm Supported Stand, Tube Voltage65-70 Kvp Tube Current 4-8 Ma Radiation- Minimum Exposure Time 0.02 Sec Upto 3.2 Sec, Leakage Radiation Less Than 0.25 Mgs/Hour Maximum At A Distance Of 1 Mt From Focal Point. Compatible To Rvg System. Aerb Approved. B) Digital Intra Oral Sensor: 1.Digital Intra Oral Sensor With Supporting Software For Computer To Be Provided 2.Automatic Controlled Exposure Technology Sensor Of Size 1 Rounded Cornered, 1200 X 1600 Pixel Minimum, Dimension 22 X 30 Mm Size 2 For All, Having Clipped Corner, 1400 X 1920 Pixels Minimum, Dimension 27 X 36 Mm C)Desktop-Compatible With R.V.G , Intra Oral Camera With 15 Inch Lcd Monitor &Software A): High Resolution, Easy To Use, Narrow Head With Led Illumination, Comfortable For Patient .Intra Oral Camera With Provision Of Variable Lens Adjustment That Can Be Attached To Computer Byusb B):Provided With 15 Inch Lcd Monitor C): Software , Technical Specifications As Follows Or Better Saliography Equipment & Kit For Dental Use , Opg & Lateral Cephalometry Machine Lateral Tmj (2 Or 4 Views) , Maxillary Sinus, Segmented Panoramic, Digital System Type, Temporomandibular Joint(Tmj),Cone-Beam Ct(Optional), Cephalometric,Segmented Bitewing,Panoramic, Opg/Tmj/Ceph Modes Should Be Available, X-Ray Generator : X-Ray Expose Time<=15 Second, Tube Voltage 85 Kilo Watt, Digital Detector/Panoramic Modality, Dicom Compatible, Computer To Be Supplied With The Machine, Detail Of Computer I3 Cpu,4 Gb Ram,500Gb Hdd,21” Monitor, Bit Depth 14 Bit Or Better, Dental Imaging Software, Windows 10 Professional Operating System, Time To Process & Display Image<10 Second Patient Position-Standing Sensor Technology : Cmos , Lab Micromotor Heavy Duty With Hps Compact And Portable Size, Continuous Variable Speed Control , R.P.M-1000 -40000,On/Off Foot Switch One- Touch Change Of The Driving Direction For Efficient Operation With Handpiece. , Steam Cleaner Dental Steam Cleaner: Power 1500W Or More, 220V, Frequency 50/60Hz. Working Pressure: 4-5 Bar. Capacity 5-10Litre Or More. With Thermostat Controller. Device With Both Steam Gun & Button/Lever Controlled Steaming Attachment. Stainless Steel Non Rusting Inner Tank Body. , Air Polisher Air-Driven Dental Air Polishing Unit With Reservoir Hand Held With Connection To Dental Chair Unit. Sterilizable Up To 275°F (135°C), 44 Psi. Iso Or Ce Certified , Composite Finishing Kit For Use With Contra Angled Latch Type Hand Piece. For Finishing Composite Restorations. Specification To Be Quoted By The Bidder/Manufacturer . , Physiodispenser Implant Motor With Handpiece Control Unit With Display Panel, Powerful Motor With Integrated Thread Cutting Function, Provided With Tool Control For Hands Free Operation. Speed Controllable Between R.P.M. Of 200-40000. Brushless Micromotor, With Upto 8 Programmable Memory. Should Have A Attached Saline Stand & Accessory Irrigation Tubings. Hands Free Operation Via Foot Control For Speed/Coolant Solution Flow Volume/Forward Reverse/Program. Handpiece Calibration System Provided With Cooling Attachment System.Handpiece- 20:1 Implant Contra Angle Handpiece With Pushbutton Chuckautoclavable, Can Generate Upto 80Ncm Torquepump Output 70Ml/Minute , Dental Implants Single Stage And Two Stage Dental Implants With Cover Screw, Impression Analog,Cover Screw & Other Attachments , Implant Maintenance Kit To Prevent Peri-Implantitis,4Pcs Carbon Fiber Scalers+1Pc Periodontal Probe & Explore+1 Pc Autoclavable Cassette , Implant Guide For Multiple Implant Cases, The Drill/Parallel Pin Is Kept Inserted In The First Drilling And That Makes The Adjacent Drilling At 7Mm And 9Mm Away From Each Other. Most Common Distance Between 2 Implants Placements. This Tool Maintains The Angle Of The Drilling As Well. The Drilling Will Be Exactly At The Mesio-Distal Distance Required , Sinus Lifting Instrument Kit: For Lateral & Crestal Approach With S-Reamer/Lateral Reamers Initial Drill/Crestal Drills Bone Inserter Bone Spreader Bone Carrier Bone Condenser Depth Gauge Chisels Of Different Width Sinus Curettes- Of Various Designs Bone Rongeur Forceps Steel Mallet Irrigation Syringe & Tips & Other Instruments Autoclavable Cassette 1 Piece , Osteotome Size Width: 3Mm Straight (Thickness At 10Mm Length: 1.50Mm) Width: 4Mm Straight (Thickness At 10Mm Length: 1.75Mm) Width: 5Mm Straight (Thickness At 10Mm Length: 2.00Mm) Material Handle Non-Magnetic Stainless Steel 316L , Implant Removing Kit Long Trephine Drills Used To Remove Bone Around Implants To Remove The Implant. 5.0 Inner Diameter: 4Mm, Outer Diameter: 5Mm 6.0 Inner Diameter: 5Mm, Outer Diameter: 6Mm , Bone Fixation Screw For The Expansion And Condensing Of The Atrophic Mandible And Maxilla. Sizes Required Expansion Screw 2.6Mm: 1.8Mm (Apical) To 2.6Mm (At 7Mm Length) Expansion Screw 3.0Mm: 2.1Mm (Apical) To 3.0Mm (At 7Mm Length) Expansion Screw 3.4Mm: 2.4Mm (Apical) To 3.4Mm (At 7Mm Length) Expansion Screw 3.8Mm: 2.7Mm (Apical) To 3.8Mm (At 7Mm Length) Expansion Screw 4.3Mm: 2.9Mm (Apical) To 4.3Mm (At 7Mm Length , Bone Scrapper It Is Used To Remove The Autologous Bone For Grafting Procedure. The Bone Scraper Has 5Mm And 6Mm Wide Working Ends. Made From Surgical Grade Stainless Steel For Longevity And Corrosion Resistance. , Bone Trephine To Harvest Autologous Cortical Bone Graft. Kit Of 8 Drills Having Sizes : 3Mm, 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm , Electrocauterykit Electrosurgical Cautery Which Is Comparatively A Newer Development Functions By Applying A High-Frequency Alternating Polarity Of Electrical Current To Cut, And Fulgurate Tissues. This Process Not Only Minimizes Blood Loss But Also Allows For More Precise Cuts. Frequency 1.5 To 1.7 Mhz Output Power 70 Watt , Typhodont Articulator Withmetal Teeth And Wax Rim Of Class I,Ii,Iii Articulated Model With Soft Pink (Not Transparent) Acrylic Or Plastic Gingiva Material. Included:28 Anatomically Shaped Screwabletypodontivorine Teeth , Articulated Model With Soft Pink (Not Transparent) Acrylic Or Plastic Gingiva Material. Included:28 Anatomically Shaped Screwabletypodontivorine Teeth , Endodontic Hand-Pieces With Micro-Tips And Retro-Treatment Kit Comprising Of A. Ultrasonic Piezoelectricscaler With Inbuilt Irrigation , Led & Water Tank B. Ultrasonicendodonticretro-Surgicaltips (For Anteriorteethupper & Lower And Posterior Teeth Of Upper And Lower Arch) C. Ultrasonicpassive Irrigation, D. Set Of Assorted Ultrasonic Tip For Instrument Retrieval And Chasing Calcified Canal , Autoclave For Hand-Piece Sterilization The Machine, Characterized By Small And Elegant. High Efficient And Thorough Sterilization, Can Be Used For The Sterilization Of Small High-Temperature Resistant Utensils And Articles Of Medical Users. • Preset Solution Volume Based On Handpiece Type (High-Speed Handpieces, Lowspeedhandpieces) • Thorough Cleaning And Lubrication With Simple Operation • Chuck Cleaning Function Ensures That The Chuck Is Thoroughly Cleaned And Lubricated • Purging Select Mode Ensures Complete Removal Of Excess Oil Integrated Large Oil Tank (1.2 Litre) Reduces Burden Of Refill , Conventional Vlc Unit Led Based. Light Modes- Fast, Ramped & Pulsed Display For Mode & Timer Selection Chordless With Rechargeable Lithium Battery Light Intensity Not Less Than 1200 Mw/Cm2output Peak Wavelength Range 450 - 490 Nm (Intensity Maximum At 460 Nm) With Inbuilt Timer, On Off Switch , Endomotor With Torque Control Hand Piece. Continuous &/Or Reciprocating Motions For Root Canal Shaping, Hand Piece With Integrated On- Off Switch, Auto Reverse Mode, Speed 250-1200 Rpm. Torque Range 0.6-4 Ncm, Multiple Adjustable Programs Standard Packaging/Physicalverification Of Sample May Be , Injectablegutta-Percha Obturation Kit Containing: Dual Kit-Pluggers-Variable Sizes. Flexible Extra Long Heat Conductible Silver Alloy Cannula, 1 Cartridge Capable Of Filling More Than 3 Root Canals Preferably With Arrangement For Back Filling. , Reconstruction Surgical Operating Microscope With Microscopic Co Observation Systems: Working Distance & Focusing- 215-500Mm Continuously Variable Through Motorized Multifocal Lens That Can Be Controlled & Focused Through Hand & Foot Control Switch & Manual Adjustment Override. Magnification Upto 18 X Eyepieces: 12.5 X Powerful Led Or Xenon Based Illumination System Controlled Through Hand & Foot Control Switch & Manual. With Built In Automatic Zoom Synchronized Illumination Field Diameter, Manual Override & Iris Controller. Binocular Tube Tiltableupto 180 Degrees With Variable Diapter Settings. Suspension System With Height, Lateral Movement Adjustable Floor Stand, With Position Locking Facility. Microscope Should Have Automatic Circuit Breaker, Voltage 230V +- 10%, Frequency 50-60 Hz. Ce/Fda Approved. Beam Splitter: Stereoscopic Beam Splitter Have Minimum Of Four Port. Have Stereo Co Observervation Attachment For Assistant 360° Movement Of Binocular With 12 X Or More Eyepiece With Diapter Setting From +5D To -8D. Face To Face Attachment With 0-180° Tiltable Binocular Tube With 12 X Eyepiece With Stereoscope Having Similar View With Main Surgeondiapter Setting From +5D To -8D. Full Hd Video Camera Display:Hd Display System Attached With Microscope Body. ( No External Monitor/Detachable Monitor Will Be Acceptable). Recording System With Integrated Hdd. Recorder Should Have Hdmi Input & Output. Permit Precise Movement Of Camera & Microscope In Vertical & Horizontal Plane. (European Ce/ Fda (Usa)Approved) , Endodontic Microsurgical Equipment:- Comprising Of A. Ultrasonic Piezoelectricscaler With Inbuilt Irrigation , Led & Water Tank B. Ultrasonicendodonticretro-Surgicaltips (For Anteriorteethupper & Lower And Posterior Teeth Of Upper And Lower Arch) C. Ultrasonicpassive Irrigation, D. Set Of Assorted Ultrasonic Tip For Instrument Retrieval And Chasing Calcified Canal , Magnification Loupes 4.5X Ergonomically Designed Binocular Loupe That Can Be Worn Over Spectacle Frame Capable Of 4.5Xmagnification At 420Mm With 3Watt Led Rechargeable Light , Technical Specifications As Follows Or Better Composite Polishing Kit Finishing & Polishing Kit Is Designed For Finishing And Polishing Of Composite & Gic Restorations, Consisting Of Dierent Color Coded Stones. • 4 X White Stone Finishers Fg 2 X Green Silicone Polishers , Ceramic Finishing Kit Efficient Kit Designed For Fine Finishing And Polishing Of Porcelain Restorations Eliminates The Need For Re-Glazing Of The Porcelain Restoration, Especially After Chairside Adjustment. Recommended Average Speed: Dura-White Stones: Speed Of 5, 000 – 20,000 Rpm Ceramiste Points: Speed Of 10,000 – 12,000 Rpm Dura-White Stones: Speed Of 5,000 – 20,000 Rpm , Metal Finishing Kit Efficient Kit Designed For Fine Finishing And Polishing Of Metal Restorations , Amalgam Finishing Kit Efficient Kit Designed For Fine Finishing And Polishing Of Metal Restorations Intra-Orally. , Automatic Developer Used To View Of The Film Processing Design, Can Wash 30*40Mm Single Film. Package Dimensions 13.9 X 13 X 11.2 Inches (35.3 X 33 X 28.6 Cm); 5.2 Pounds (2.34 Kg) Technical: Use For Film Size:30*40Mm The Biggest Irrigation Width:50Mm Medicine Tank Capacity: Enhancement Of 250Ml,Fixing 250Ml,250Ml Water Washing Method: Manual Developing Temperature: Room Temperature Material: Environmentally Friendly Medical Plastic Net Weight:2.5Kg Products Size:395*325*230Mm Packing List: Main Machine : One Set Three Potion 250Ml Cup , Chairside Microabrasion A Portable Pneumatic Device, Easy To Install And Operate, Designated To Surface Blasting O Prosthesis/ Restoration. Work Pressure - 60 A 80 Lbf/Pol (4-5,5 Kgf/Cm) , Bleachng Unit Led Based Tooth Whitening System With Intensity And Timer Controlling Unit With Portable Multi Arm Attachment Electrically Operated , Instrument Retrieval Kit This System Is Designed To Assist In The Removal Of Intra-Canal Obstructions Such As File Segments, Carrier Based Obturators And Silver Points. The Rugged Yet Simplistic Design Makes Obstruction Removal Less Challenging. Constructed From Titanium And Stainless Steel And Redesigned To Insure Maximum “Bite”. Features: 4 Sizes For All Areas Of The Canal (Ranging From .4Mm To 1.3Mm I.D.) Geometrically Descending Sizes To Accommodate Canal Anatomy Simplistic 2 Piece Design Constructed Using Titanium And Stainless Steel Cut-Out Window “Tilt Back” Lumen Feature Rapid Taper Titanium Screw Wedge Color Coded Silicone Grip Reverse Thread , Amalgamator With Automatic Dispenser Input Voltage 220-230V Provided With Touch Pad Selector Pre-Programmed Time Setting Quiet, High-Speed Mix Capsules Built-In Automatic Timer Capsule Holder Accepts All Types Of Amalgam Capsule , Glass Bead Sterilizer Electrically Temperature Regulated To Heat Contained Glass Beads With On Off Switch. Small Rectangular Base For Keeping At Chairside Provided With Lid. It Should Reach Operating Temperature Of Approximately 240 C To 270 C In 15-20 Minutes Time. Sterilization Is On Contact With Glass Beads .Unit Can Be Left In The “On” Position All Day And Is Safe For Use In Laminar Flow Cabinets. , Vibrator • Electrically Operated - Size 4.5 X 8 X 6.5 Inches Or More Platform Shape Rectangular, Type Heavy Duty Construction Enamel Painted Body With Rubber Plate Above Body, Speed: 3-Speed Vibration Controller • Platform Shape Rectangular , Cad-Cam Milling Machine Capable Of Unattended 5-Axis Milling With Simple One-Button Operation Precision Milling Of Wax, Zirconia, Nano Composites And Pmma Blocks Using Fully Automated 8 Position Disc Changer Unit Integrated Air Flow System Keeps Work Area Clean Sintering Unit Sintering Unit Capable Of Maintaining High Temperature Of Around 1500 Degree Celsius For 5 Hours Or More With Vacuum Unit 110-240 Volts 50-60Hz With Cad/Cam Unit Capable Of Unattended 5-Axis Scanning Diagnostic Notification System Alerts User Of Machine Status Cam Software Material Sizes Supported Disc, Pin & Ingot (European Ce/Fda Approved) &Iso/Dtr 18845 (Dentistry -- Test Methods For Machining Accuracy Of Computer-Aided Milling Machines) , Lab Airrotor For Precision Carving Of Metal And Ceramic , A. Laser Guided Pin Drilling System (Pindex System) Electrically Operated 220V, Laser Guided Pinsetter, Pin Drilling For Easy Die Pin Attachment. Laser Light Technology With Carbide Bur Drill With High Speed Motor. To Accurately Drill Parallel Holes Into The Underside Of The Model B. Pins For Use With Laser Guided Pin Drilling System (Pindex System) System Of Various Sizes Made With Non Corrosive Alloys For Use With Laser Guided Pin Drilling System . In Unit Pack Of 100 Pieces , Circular Saw The Motorised Model Slitting Is The State Of The Art “Precision Slitting Technique Through Models. The Manual Model Slitting Leads To Various Errors Like Inclined Plane, Non-Uniform Gap And Rough Slit Surface. The High Speed Slitting By Circular Saw Eliminates All The Shortcomings Of Manual Slitting And Improves The Productivity. The Model Can Be Held Firmly On The Electromagnetic Model Holder. The Illumination Lamp Gives Clear Vision Of The Working Model. , Vacuum Investment Unit Voltage 85-245V 50/60 Hz Mixing Speed 100-500 Rpm Premix, 100-400 Rpm Vacuum 27.5 In Hg (930 Mbar )User Programs 25 Mixing Time1-255 Seconds (4.25 Minutes ) Capable Of Mixing Unit Amount Of Investment Material Under Vacuum Through A Motor , Pneumatic Chisel • Robust High-Performance Chisel Operated By Compressed Air For Universal Use In The Laboratory. • High-Frequency Chisel To Deflask Dentures And Disinvest Casting. • Avoid, Micro-Cracks Formed By Unconventional Methods Of Plaster Removal. • High-Quality Compressed Air Control. • Filter, Lubricator, Regulator, Unit Built-In Circu , Facebow With Semi Adjustable Articulator Hanau Wide View Arcon Articulator With Spring Bow, Earpiece, Face Bow, Orbital Indicator, Bite Fork, Mounting Plates & Other Accessories , Laser (Hard Tissue) Hard Tissue Laser-Er,Cr: Ysgg Laser, 0.1-9.0W(450 Mj)10-50 Hz, Laser Classification 4, Voltage 100- 230 Vac , Of Wave Length 2780Nm Erbium Yag Laser, Pulse Energy Upto 700 Mj, Power Upto 8.4 Watt On Tissue, Frequency 10Hz-50Hz, Wavelength 2940Nm
