|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, depth upto 1.5 mtr. including disposal of excavated earth upto 1.0 mtr from cutting edge, disposed earth is to be leveled and neatly dressed in:All kinds of soil (Including all carriages). |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All works up to plinth level) in 1:4:8(1 cement:4 coarse sand 8 graded crushed stone aggregate 40mm nominal size) (Including all carriages). |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All works up to plinth level) in 1:3:6(1 cement: 3 coarse sand 6 graded crushed stone aggregate 20 mm nominal size) (Including all carriages). |
| 4 | Providing and laying in position cement concrete of specified gradeexcluding cost of centering and shuttering- All works upto plinth level1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) (Including all carriages). |
| 5 | Providing and laying Reinforced Cement Concrete in 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) in suspended floors, balconies, landings and staircases having upto 15º slope, excluding cost of centering and shuttering- all work upto floor V level(Including all carriages). |
| 6 | Reinforcement for RCC work including straightening, cutting, bending, placing in positionand binding all complete. Thermo- mechanically treated bars. (Including all carriages). |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 8 | Foundations, footings, bases of columns etc. for mass concrete(Including all carriages) (Including all carriages). |
| 9 | Suspended floors, roofs, landings, balconies and access platform. |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Edges of slab and breaks in floors and walls. Under 20 cms wide |
| 13 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 12.5 mm nominal size) (Including all carriages). |
| 14 | Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20 mm nominal size crushed stone aggrete (Including all carriages).. |
| 15 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 fine sand) (Including all carriages). |
| 16 | Extra for brick work in superstructure above plinth level upto floor V level (by manual means) (Including all carriages). |
| 17 | Half brick masonry with bricks of class designation 75 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) (Including all carriages). |
| 18 | Extra for half brick masonry in superstructure above plinth level upto floor V level (Including all carriages). |
| 19 | 12mm thick cement plaster of mix 1:4 (1 cement: 4 Fine sand) Inside(Including all carriages). |
| 20 | 12mm thick cement plaster of mix 1:4 (1 cement: 4 Coarse sand) Outside (Including all carriages). |
| 21 | 12mm thick cement plaster finished with a floating coat of neat cementof mix 1:3 (1 cement: 3fine sand) Tank walls (Including all carriages).. |
| 22 | 6mm thick cement plaster of mix 1:3 (1 cement: 3fine sand) Ceiling (Including all carriages). |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60 cm (Including all carriages). |
| 24 | Tile work in skirting, risers of steps and dado (upto 2 mtr height) over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and joiting with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete 8 mm thick (Including all carriages). |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lungs or with dash fasteners shall be paid for separately) Sal wood (Including all carriages). |
| 26 | Providing 40x5mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (Including all carriages). |
| 27 | Providing and fixing glazed shutter for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick shutters in Second class deodar wood |
| 28 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws. ISI marked M.S.pressed brightfinished butt hinges with necessary screws of required size. Second class deodar wood (Including all carriages).. |
| 29 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class deodar wood 35 mm thickness (Including all carriages). |
| 30 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (barrel type) with necessary screws etc. complete. 150x10mm (Including all carriages). |
| 31 | Providing and fixing ISI marked oxidized M.S. door latches conforming to IS:5930 with screws etc. complete 250x20x6mm (Including all carriages). |
| 32 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc. complete: 125 mm (Including all carriages). |
| 33 | Providing and fixing oxidized M.S. casement stays (straight peg type) with necessary screws etc. complete. 200 mm weighing not less than 120 gms (Including all carriages). |
| 34 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer (Including all carriages).. |
| 35 | Finishing wall with water proofing cement paint of required shade New work (two or more coats) applied @ 3.84kg/10sqm (Including all carriages). |
| 36 | Providing and fixing M.S. grills of required pattern in frames for windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc. (Including all carriages). |
| 37 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Including all carriages). |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 39 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) (Including all carriages). |
| 40 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Medium class 100 mm dia GI pipe(Including all carriages).. |
| 41 | Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(to be paid as per actual) In gratings, frames, guard bar, ladders, railings, brackets, gates, lowering/delowering stands and other similar works(Including all carriages). |
| 42 | Welding by electric plant including transportation of electric plant at site etc. complete (to be paid as per actual) (Including all carriages). |
| 43 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion Single socketed 110mm dia pipes (Including all carriages).. |
| 44 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device(handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid(Including all carriages). |
| 45 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps(Including all carriages).. |
| 46 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board of size 610x510 mm with bowl depth 200mm (Including all carriages). |
| 47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe with 32 mm dia (Including all carriages). |
| 48 | Providing and fixing PTMT grating of approved quality and colour Circular type. 100 mm nominal dia (Including all carriages). |
| 49 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work |
| 50 | 15mm dia nominal bore (Medium) (Including all carriages). |
| 51 | 20 mm dia nominal bore(Medium) |
| 52 | Providing and fixing brass bib cock of approved quality. |
| 53 | 15 mm nominal bore (Including all carriages). |
| 54 | 20 mm nominal bore |
| 55 | Providing and fixing brass stop cock of approved quality. |
| 56 | 15 mm nominal bore (Including all carriages). |
| 57 | 20 mm nominal bore |
| 58 | Providing and fixing ball valve (brass)of approved quality complete. |
| 59 | 15 mm nominal bore (Including all carriages). |
| 60 | 20 mm nominal bore |
| 61 | Constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 ( 1 cement:5 coarse sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks (crushed) (Including all carriages). |
| 62 | Constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter,160mm bottom diameter, and 180 mm deep(inside) with chained lid and R.C.C top slab in 1:2:4 mix ( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 (( 1 cement:5 coarse sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks (crushed) (Including all carriages). |
| 63 | Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, Star or equivalent having valid ISI license) (Including all carriages). |
| 64 | Providing and laying waste and vent PVC 100 mm dia pipes (Supreme make or other approved brand) including covering with cement concrete in 1:3:6 mix( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (Including all carriages). |
