}

Tender For Supply Of Tractor Drawn Fout Wheel Trailer Mounted Mobile Toilet Van Supply Work, Sawai Madhopur-Rajasthan

Department Of Local Bodies has published Tender For Supply Of Tractor Drawn Fout Wheel Trailer Mounted Mobile Toilet Van Supply Work. Submission Date for this Tender is 24-03-2023. Springs Tenders in Sawai Madhopur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

36750504
Tender For Supply Of Tractor Drawn Fout Wheel Trailer Mounted Mobile Toilet Van Supply Work
Open Tender
NCB
Rajasthan
Sawai Madhopur
24-03-2023

Tender Details

Supply Of Tractor Drawn Fout Wheel Trailer Mounted Mobile Toilet Van Supply Work , Toilet Specification No. Of Toilet: 10 Number ( 5+5 ) Toilet Size: 35*33*69 Toilet Tub: Non Corrosive Frf Tub Structure: 35X35x5ms Angle And Pipe Paneling: Partition Wall & All Panels Made From 1.6 Mm Ms Sheet. Door : Inside Opening With Ordinary Hinges Made From 1.6 Mm Ms Sheet. Top: Corrugated Frp Sheet Side Platform 40X40 Ms Angle 25X25 Ms Angle And Flat With Side Railing Made From Ms Pipe. Floor Shall Be Made To Aluminum Chequered Plate Of 3Mm Material: Made From Ismc 75X40 And 25X3 Ms Flat With Side Railing Made From Ms Pole Ladder: Foldable Type Ladder On Both Side Of Toilet Made From Ms Pipe And Flat Sludge Tank: Capacity: 2500 Ltr. Made From 3.15Mm Ms Sheet Material: 3.15Mm Thick Ms Sheet Fitting: Single Drain Valve 100Mm Dia Heavy Duty Butterfly Valve Provided At Rear By Which Sludge Tank Flushing Line By Which Tank Can Be Cleaned By Jet Of Water. Flushing Elbow Provided At Rear By Which Sludge Can Be Suced Directly By Vaccum Machine Air Vent Pipe Is Provided To The Sludge Tank To Exhaustfoul Glasses. Water Tank Capacity: 2000 Ltr Made From 3.15Mm Ms Sheet Material: 3.15Mm Thick Ms Sheet Fitting: 100Mm Drain Valve Flushing Arrangement To Clean The Sludge Tank 2Non Of Washbasins, On-Off Type Tapes 14Non Bulb Point 2 Non Towel Hanger 2 Non Mirrors On Both Sides Trailer Specification Turn Table: Heavy Duty Full Turn With Spring Casnine Type Bar Made From Ismc 100X500 Cgassis Frame Made From Ismc 125X65 , Chassis: 125X65, 100X50x 75X40 Tyre No: 4Non Size: 7.50X16pr Axle No:02 Nos Material: Cast Sheet Bearing No.08 Nos Type: Tapper Roller Suspension : Discharge Valve 100 Mm Heavy Duty Bufferfly Valve At Near Bottom On Sludge Tank Painting: Epoxy Base Fining On The Sludge And Water Tank And Red Oxide And Synthetic Enamel On Outer Surface

Key Value

Document Fees
INR 1000 /-
EMD
INR 39600.0 /-
Tender Value
INR 19.80 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail