Name of Work: Repairs to Prime Mover TATA 909 JK05E-1831 Mounted Sucker Machine of Municipal Committee Watergam.
Sl. No.
Item Description
1
Reinforcement to suspension system of by way of dismantling complete leaf spring assembly left and right front and then retensioning of leaf spring and reassembling by way of P/F of following items : a)Main leaf spring = 2 no b)Auxiliary leaf spring=2 noc)Centre bolt=2 nod)U-bolt with nut= 2 noe)U clamps= 2 nof) Bushes with shims=2 no
2
Reinforcement to suspension systemby way of dismantling complete leaf spring assembly left and right (rear) and then retensioning of leaf spring and reassembling by way of P/F of following items : a) Main leaf spring = 2 no b) Auxiliary leaf spring= 4 no c) Centre bolt= 2 no d) U-bolt with nut=4 noe) U clamps= 4 nof) Bushes with shims= 4 no
3
Providing and fitting of new intercooler radiator assembly of Tata 909by way of dismantling the damaged radiator from the engine by using suitable tools and tackles and then fitting of new radiator assembly and then testing thereof. (The parts should be Genuine Tata Spares)
4
Providing and fitting of new radiator fan by way of replacing the damaged fan with new radiator fan and testing thereof. (The parts should be Genuine Tata Spares)
5
Four wheel checkingof Tata 909 by way of p/f of following items (The parts should be Genuine Tata Spares):-a. Oil seal front & rear = 4 nosb. Tie rod end set = 2 setc. Drag link end set = 2 setd.wheel bearing inner =2 noe.wheel bearing outer = 2 nof. U.J. cross= 2 Nog. King Pin=2 Noh. King pin bearing= 2 No
6
Repair to Steering Box by way of providing and fitting of piston ring set, worm servicing kit, Steering Filter, centre shaftand reassembly of same.(The parts should be Genuine Tata Spares)
7
P/F of Front Wind shield new by replacing old damaged wind shield, new rubber beading and using adhesives for water proofing.
8
Repair to differential gear box of Tata 909 by way of disassembling of differential housing , adjustment of differential shaft and gear train and removing damaged parts and then providing and fitting of new parts viz Pinion=1 No, Pinion Bearing = 02 No\"s, Pilot Bearing = 01 No, oil seal = 01 No, Pinion Lock = 01 No. The job also includes Machining job of crown wheel by way of turning / finishing on leather and hand grinder for generating proper mesh with pinion.(The parts should be Genuine Tata Spares)
9
Repairs works to complete cabin of Tata 909 by way of Denting which involves removal of visible deformities at the damaged portion and preparing the damaged surface and applying filler material and then shaping and finishing the surface by abrasive sand paper for applying the surface primer and suitable quality paint.
10
Door setting by way of P/F of door handles and locks and setting of glass machine by replacing worn out Nuts, bolts, hinges etc. complete in all respects.
11
Providing and fitting of new crash barrier fabricated out of 3\" M.s pipe 8\" long along with brackets for mounting of the same. The job also includes primer coat and then painting the same with night reflector tape. 01 complete job.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
