|
| 1 | Wooden mallet for breaking clods |
| 2 | ENAMEL TRAY - 450 X 300 X 40 MM (18\" X 12\") |
| 3 | MORTAR AND RUBBER COVERED PESTLE |
| 4 | EVAPORATING BASIN - PORCELAIN DISH - 150 MM DIA |
| 5 | MOISTURE CAN-50MM X 50MM-ALUMINIUM (120 GM) |
| 6 | MOISTURE CAN-75MM X 50MM-ALUMINIUM (230 GM)Moisture Content Tin with Lid. Dia. Ø : 75 mm x Height : 50 mm, Aluminum.Capacity : 230 gm (Approx.) |
| 7 | COMPACTION MOULD100 mm internal dia x 127.3 mm height, 1000 ml volume complete with collar and base plate, all made of mild steel tie rods of mild steel and wing nuts for clamping. |
| 8 | COMPACTION RAMMER , Light Compaction rammer, light, made of mild steel 2.6 kg weight, 50 mm dia compaction face, 310 mm controlled free vertical fall. |
| 9 | EXTRACTOR FRAME - HYDRAULIC - HAND OPERATEDApplication : This Extractor Frame is used for taking out soil samplescompacted or undisturbed, from 100mm diameter and 150mm diameter cylinder such as core cutters, Proctor moulds, C.B.R. moulds, marshall moulds etc |
| 10 | Density Spoon |
| 11 | Trowel medium 6\" |
| 12 | Spatula 8\" It shall be made of stainless steel with wooden handle. Size of blade 20 cm long.Width of blade 30 mm approx |
| 13 | MOISTURE CAN-100MM X 100MM-ALUMINIUM (1.050 GM)Moisture Content Tin with Lid. Dia. Ø : 100 mm x Height : 100 mm, Aluminum.Capacity : 1.050 gm (Approx.) |
| 14 | EVAPORATING BASIN -PORCELAIN DISH - 200 MM DIA |
| 15 | GLASS PLATE - 450MM X 450MM X 8 MM |
| 16 | COMPACTION MOULDCompaction mould 150 mm internal dia x 127.3 mm height, 2250 ml volume, complete with collar and base plate all made of mild steel, fixing tie rods of mild steel with wing nuts. |
| 17 | Compaction Rammer 4.9 KG HeavyCompaction rammer, made of mild steel 4.89 kg weigh, 50 mm dia compacting face, 450 mm controlled free vertical fall |
| 18 | Liquid Limit Device- Hand operated with counter The apparatus consists of a brass cup, a crank and cammechanism, mounted on a rubber base of a specifiedhardness. A brass pin having a knurled end for easyremoval holds the brass cup. The height of fall of thecup can be adjusted by a horizontal lead screw.Fitted with a drop counter to automatically record number of drops of the cup.Supplied complete with: Grooving Tool Type ‘A’ and Gauging Block as per IS: 9259 IS:2720 (Part-V). |
| 19 | Palette Knives two with blade 20 cm long and 3 cm wide for mixing soil and water in the glass plate. |
| 20 | BEAKERS - BOROSILICATE GLASS - LOW FORM ,CAP. ; 500ML |
| 21 | Plastic Limit Apparatus Conforming to IS: 2720 (Part V)The apparatus consists of :i) Glass plate 200 mm x 150 mm x 3 mm thickii) Porcelain evaporating dishiii) Brass rod 3 mm dia, 100 mm long.iv) Flexible spatula with 80 mm long, 20 mm wide blade.v) Moisture Cans, 12 Nos. |
| 22 | Sand Pouring Cylinder (Small)The apparatus is suitable for field density estimation of fine andmedium grained soils, as per IS: 2720 (Part XXVIII). It consistsof:i) Sand Pouring Cylinder 115 mm internal dia with conicalfunnel and shutter.ii) Calibrating Container, 100 mm inner dia and 150 mm deep with flange 50 mmwide.iii) Metal tray 300 mm square x 40 mm deep with a 100 mm dia hole at the centre. |
| 23 | Sand Pouring Cylinder, (Large) The apparatus is suitable for estimation of field density of fine, medium and coarsegrained soils, as per IS : 2720 (part XXVIII) and consists of :-i) Sand Pouring Cylinder, 215 mm internal dia, withconical funnel and shutter.ii) Calibrating container 200 mm inner dia x 250 mmhigh with 75 mm wide flange.iii) Metal tray 450 mm square x 50 mm deep with a200 mm dia hole at the centre. |
| 24 | Scraper for sand pouring cylinder |
| 25 | G.I.TRAY - 450 X 450 X 50MM for sand pouring cylinder |
| 26 | G.I.TRAY - 300 X 300 X 50MM (12\" X 12\" X 2\") |
| 27 | STANDARD SAND FOR FIELD DENSITY TEST - BAG OF 25 KG |
| 28 | Hydrometer with JarAs per IS 2720, Part-IV, 1985. Complete with Soil Hydrometer, Hydrometer Jar and Rubber cork. |
| 29 | SPECIFIC GRAVITY BOTTLE - 50 ML. NARROW MOUTH FOR SOIL As per IS:2720 (Part 3), with stopper. |
| 30 | RAPID MOISTURE METER-0 - 25% WITH PRESSURE GAUGEThe unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0 25% X 1% on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls(3 OF 12.5 MM AND 1 OF 25 MM DIA) for thorough mixing.Complete in highly polished wooden carrying case with handle. AS PER IS:2720(PART II) / IS 12175 |
| 31 | Sodium hexa meta phosphate 1Kg |
