Name of Work: Providing catch water drain, cement concrete path, levelling of ground surface and providing steel gate for the office complex at MHEP Pahalgam
Sl. No.
Item Description
1
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)Qty = {(18.3 × 7.3) + (5.5 × 4.3) + (5.5 × 5.5)} × 0.20 = 37.49 cum
2
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed (1m from cutting edge): All kinds of SoilA) Drain: 1 × 20.42 × 0.51 × 0.56 = 5.83 cumB) Path: 34 × 0.91 × 0.254 = 7.85 cumTotal Qty = 13.69 cum
3
Providing and laying of solingA) Drain: 1 × 20.42 × 0.51 × 0.10 = 1.04 cumB) Path: 34 × 0.91 × 0.10 = 3.09 cumTotal Qty = 4.13 cum
4
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)A) Drain: 1 × 20.42 × 0.51 × 0.076 = 0.79 cumB) Path: 34 × 1.22 × 0.076 = 3.15 cumTotal Qty = 3.94 cum
5
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)A) Drain:Sides : 2 × 20.42 × 0.30 × 0.076 = 0.93 cum Bed: 20.42 × 0.51 × 0.076m = 0.79 cum B) Path: 34 × 0.91 × 0.076 = 2.35 cumTotal Qty = 4.07cum
6
Centering and shuttering including strutting, propping etc. and removal of form work for:Qty = 2 × 20.42m × 0.30m = 12.25 Sqm
7
Providing and fixing 1mm thick M.S. sheet door with frame of 40 × 40 × 6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.10.5.1 Using M.S. angles 40 × 40 × 6mm for diagonal bracesQty =1 × 3.04 × 2.44 = 7.42 sqm
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
