Tender For Comet Assay System With Water Circulator, parel-Maharashtra

Tender For Comet Assay System With Water Circulator Supply, Installation, Commissioning And Warranty Of Comet Assay System With Water Circulator , Supply, Installation, Commissioning & Warranty Of Comet Assay System With Water Circulator And Power Supply Unit: Specification: • The Instrument Should Be Suitable For Single Cell Gel Electrophoresis. • Should Have Robust Tank Construction, Made Up Of Ebony Acrylic Ensures That Cells Remain Free Of Exposure To Background Light And Dna Damage During Electrophoresis. • Having The Capacity Of 10 Slides With Cooled Central Platform To Provide A Convenient Surface For Slide Preparation And High Efficiency Cooling For Enhanced Resolution With External Cooling Source. • The System Buffer Volume Should Be ~550 Ml. • Dimensions Of The System Should Be 17X34x9 Cm ( Approx ) . • It Should Be Able To Run At 25V / 300Ma For 1 Hour. • The Unit Must Have Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use: Ce Certification As Will Be Used Inhospital Settings. • System Should Be Equipped With A Power Supply System From A Reputed Manufacturer. • It Must Have 2-300V, 1-700Ma And 150W With 1V / 1Ma Increment. • It Should Be Capable Of Running At Constant Current Constant Voltage. • Power Supply Should Have 5 Pair Of Output To Connect 5 Units All Together In The Same Unit. • It Should Be Programmable To Set Different Programs. • Display Should Be 2.4” Lcd Display. • It Must Include Preset Programs And Must Have 6 Steps With 30 Programmable Files. • It Should Have Timer To 999 Minutes And Timer Alarm Too After The End Of Run. • When Target Constant Mode Is Set, The Power Supply Automatically Adjusts The Two Other Parameters To Maximum To Allow For A Constant Run. • Safety Feature: No Load Detection, Leakage Detect, Over Load Detection, Over Temperature Protection, &Sudden Load Change Detection. ? Circulator: The Circulators Should Have Normal Heating & Cooling Applications. • It Should Use Microprocessor-Based Technology. • It Should Be Fitted With A Powerful Pump To Take Care Of Both Internal &External Circulation Applications. • It Should Incorporate A Heater To Care For Fast Heating Rates. • It Should Have A Bath Volume Of 5 Ltr; The Pump Flow Rate Should Be 12.5 Ltr / Min. • The Temperature Range Should Be Between -28 To 100°C. • The Temperature Control Should Be Pid+; The Temperature Stability Should Be ±0.03°C. • The Heater Capacity Should Be 2000 Watts. • It Should Have A Refrigerant Of R134 A. • It Should Have Special Safety Features For Low Liquid Level Over Temperature Protection. • Should Be Offered With A Standard Warranty Of 2 Years.

Refer document

Refer document

Refer document